Tuning Wiki
Browse Toyota

This guide covers selected Toyota Tundra and Land Cruiser 5.7-litre 3UR V8 applications, including a separately identified supercharger example. It combines HP Tuners coverage and owner reports with Toyota and equipment-manufacturer documentation. Vehicle, fuel and gearbox details are market- and calibration-specific.

Identify the engine, fuel system and gearbox

HP Tuners lists 2007-18 Tundra 5.7 3UR-FE and 3UR-FBE applications including transmission, and separately lists 2019 3UR-FBE and 2019-21 non-flex 3UR-FE Tundras. Its 2007-15 Land Cruiser 5.7 3UR-FE row also says including transmission. Do not infer that transmission tuning is included for later rows which do not say so, or that every market, ECU or parameter is covered. Check the fitted PCM, calibration and current licence and device requirements with HP Tuners. HP Tuners: Toyota supported applications.

For the US 2015 Tundra, Toyota describes a 5.7-litre DOHC V8 offered in petrol and flex-fuel variants with a six-speed electronically controlled automatic. The US 2015 Land Cruiser also had a 5.7 V8 and six-speed automatic, with engine output and equipment as factory specifications, not tuning targets. Verify the installed powertrain and modifications before applying either example. Toyota: 2015 Tundra; Toyota: 2015 Land Cruiser.

A reproduced 2015 Tundra service procedure documents the AB60F six-speed and treats fifth and sixth gear with lockup as distinct states. That is a specific transmission example, not proof that every Tundra or Land Cruiser contains an AB60F or that HP Tuners exposes identical channels. Match the gearbox code and service information to the truck.

Flex-fuel badge versus an individual supercharger calibration

Toyota offered the 2015 5.7 in a flex-fuel variant, but a particular modified calibration can impose different fuel requirements. Magnuson's TVS2650 installation manual, revision E, for specified 2010-18 flex-fuel Tundra 5.7 trucks instructs users of that kit and supplied calibration to use premium 91-octane petrol and not E85; it calls for checking fuel history before installation. Its document also refers to HP Tuners RTD files. The specified number is the manual's market-specific octane label; check the kit provider for the equivalent local fuel rating. This is not a universal rule for every supercharged 3UR or flex-fuel tune.

Record the exact kit, injector and fuel-system hardware, actual fuel, calibration and intake-air temperature. Confirm the correct kit-specific tune and fuel requirements with the supplier, and inspect fuel supply, intercooler and sensors before applying load. Compare commanded and independently measured lambda where possible; a tune's target is not a measured mixture. Log engine speed, load, airflow, manifold pressure if exposed, timing and knock-related channels, and intake and coolant temperature, checking units and the actual sensor location.

Owner-reported tuning cases

A Land Cruiser owner reported comparing their Land Cruiser and a Tundra supercharger file in HP Tuners and copying or interpolating multiple tables, while another owner of a 2008 vehicle reported differences across ECU model years. These are individual accounts, not validated instructions or proof that the two vehicle calibrations are interchangeable. A matching table shape or a smooth interpolation does not establish identical definitions, injector data, hardware, OS or protection behaviour. HP Tuners says repository files are for reference and should not be written to a different ECM; retain and work from the vehicle's own supported read. Supercharged Land Cruiser calibration report; HP Tuners: licensing and repository files.

A 2011 Tundra owner described an HP Tuners tune, modified intake and changes to towing-mode shift behaviour. The reported result is subjective and does not establish safe shift points for another truck, tyre size or load. Record actual road speed, engine rpm, throttle, requested and actual gear, towing mode, transmission temperature and converter command or slip where reliably available. Separate a shift request from execution or converter lockup, and check fluid, wiring and mechanical condition before treating a symptom as a schedule issue. 2011 Tundra owner report.

Baseline and validation

  1. Record faults and freeze-frame before reading; HP Tuners warns that vehicle reading may clear DTCs. Save the original supported read, module IDs and a baseline log. HP Tuners: getting started.
  2. Confirm interface, profile and actual channels. A display layout does not add channels automatically; choose a suitable sample rate and compare similar load, temperature, fuel and towing conditions. HP Tuners: Scanner layouts.
  3. Investigate mechanical, fuel, sensor and cooling faults before calibrating. Keep protective strategies appropriate to the equipment, document each supported change, and use a fresh log to check the result. Do not use an individual owner's boost, ignition or shift numbers as a universal target.

Not established

Whether the Land Cruiser and Tundra supercharger calibrations are interchangeable, and safe shift points for towing on a modified Tundra, are not established.

Related: Toyota Land Cruiser generations; Tacoma 4.0 transmission example; HP Tuners MPVI4.

Continue the conversation

If this topic interests you, consider joining the following forums. They host material referenced in this article.