Tuning Wiki
Vi-PEC iSupra ECU in an open enclosure
Vi-PEC iSupra i-Series plug-in ECU shown as a family illustration; this V-Series model's board, enclosure and vehicle connectors differ. Image: Link Engine Management Vi-PEC product archive, reproduced with permission.

Vi-PEC V Series Subaru V5-6 is a V Series plug-in ECU documented for Subaru WRX 1999–2000. It is a vehicle-specific replacement board, and the precise model year, engine, ECU connector and market variant must be checked against the installation guide. Link's Vi-PEC manual index.

Installation and pin functions

Use the specific Vi-PEC installation manual for this application. Its installation instructions and pin-function sections identify connections and application differences; a similarly named V Series plug-in board for another vehicle must not be used as a wiring reference. Check the original ECU part number and wiring before fitting.

Programming and support

Link lists Vi-PEC Tuning Software (VTS) for the V Series. Firmware compatibility and the calibration depend on the ECU version. Consult the software archive and retain the original calibration before any change.

Identification limits

This page is indexed by the documented application rather than an independently verified manufacturer SKU. Check the manual for exact compatibility and do not infer additional vehicle fitments.

Manufacturer pinout tables

These are all positions listed in the application-specific Vi-PEC installation guide, page 20. The guide specifies the view looking into the ECU from the wire side. Positions omitted by the guide are not assumed unused; functions must be configured for the vehicle. The manufacturer lists Aux 1 at both B134-1 and B134-21. It labels B136-19 An Temp 3 for PCB V1.1 only. Verify the board version and paired functions.

Main ECU connector: documented positions

PositionECU function
B134-1Aux 1
B136-20An Volt 3
B134-4Aux – Ign 3
B136-21An Volt 4
B134-5Aux 6
B136-25DI 4
B134-6Aux 5
B136-28An Temp 1
B134-7Ignition 1
B136-8+14V Main Relay
B134-13Aux – Ign 4
B136-17Ground
B134-14Aux 7
B136-19An Temp 3 (V1.1 PCB ONLY)
B134-15Aux 8
B134-16Ignition 2
B134-18Injection 4
B134-19Aux 2
B134-21Aux 1
B134-22Aux 3
B134-25Injection 3
B134-28Aux – Inj 5
B134-31Injection 1
B134-32Injection 2
B135-1DI 2
B135-2DI 1
B135-11DI 6
B135-14Aux 4
B135-26DI 3
B136-1An Volt 2
B136-7An Volt 1

Other connections

PositionECU function
Expansion 1Signal Ground
Expansion 2+5V Out
Expansion 3DI 5
Expansion 4N/C
Expansion 5An Volt 5
Expansion 6An Volt 6
Expansion 7An Temp 2
Expansion 8An Temp 3

Directly applicable articles

Technical articles assigned to this context will appear here.