Tuning Wiki

Additional model references

Additional model and variant references

Historic E and fuel-only F model references

F-series entries identify historic fuel controllers; they are included for reference and not assumed to control ignition.

Additional earlier model references

Individual ECU model references

Further historically documented names are listed below; a name without a linked model page does not yet have a standalone reference.

Haltech produces programmable universal wire-in ECUs and vehicle-specific kits. Record the exact ECU, part number and harness before selecting wiring. Haltech buyer's guide.

Haltech Nexus S series ECUs
Nexus S-series promotional image: Haltech. Permission to republish confirmed by the user.

Universal models compared

Counts describe physical channels in Haltech's universal comparison, not a guarantee that every function can run simultaneously. Peak-and-hold injector outputs, driver current, software version, wiring and internal resources determine the configuration. Availability can change.

ModelInjector outputsIgnition outputsDPOMAPIdentification and distinctions
Nexus T14454-bar internalCompact universal ECU.
Nexus T26654-bar internalSix injection and ignition outputs; check the wiring and functions for this model.
Nexus S24464-bar internalPeak-and-hold injectors, integrated wideband, 128 MB logging and up to two electronic throttles.
Nexus S38864-bar internalLarger S-series unit: eight injector and ignition channels. Sequential injection and ignition for up to eight cylinders.
Nexus R38864-bar internalVehicle control unit with integrated power distribution, four 25 A high-current outputs and onboard inertial sensor.
Nexus R518128ExternalHigh-I/O VCU with integrated power distribution and four 25 A high-current outputs. 18 injector channels allow staged arrangements.
Elite 5504454-bar internalFour-cylinder-oriented unit; no half-bridge outputs in the manufacturer comparison.
Elite 7506654-bar internalSix injector and six ignition outputs; no half-bridge outputs in the comparison.
Elite 15004454-bar internalFour injector/ignition outputs and half-bridge outputs for stepper or DBW control.
Elite 25008854-bar internalEight injector and ignition outputs with half-bridge outputs.
Elite 2500T8854-bar internal2500-family unit with torque-management functions in Haltech's comparison.

Haltech identifies S2/S3 as successors to Elite 1500/2500, but says their ECU connectors differ and the ECU end of the loom must be repinned. Both S units list one onboard wideband controller, two knock inputs, six synchronised pulsed inputs, 11 analogue voltage inputs and up to two electronic throttles; additional lambda channels need external CAN equipment. R-series adds onboard power distribution; S-series does not. Injector and ignition channel totals alone do not establish suitability for a direct-injection engine.

Vehicle-specific kits and plug-ins

A direct plug-in board, adapter-harness kit and terminated engine harness are different installation types. Haltech lists Nexus Rebel K and Rebel JZ as engine-specific ECU and terminated harness packages. Its S-series application list includes the following kits; S2 and S3 availability differs by vehicle. Match ECU and harness part numbers, gearbox, sensor arrangement and market before purchase.

Engine or vehicleDocumented kit family examples
Honda / AcuraOBD-I Accord/Civic/Integra/Prelude, DC5/RSX, EP3, S2000
MazdaNA and NB MX-5, NB turbo, RX-7 FD S6 and S7/8
MitsubishiEclipse 2G turbo, Evo 4–8; Evo 8MR and 9 on the S3 list
NissanS13/S14/S15, R32–R34 applications, Z32, Pulsar, Micra and selected Patrol applications
SubaruSelected 1999–2000 Forester and WRX, later WRX/STI kits; check exact year and version
ToyotaJZA80 Supra and 80-series Land Cruiser listed as S3 kits

These are manufacturer-listed S-series kit examples, not a statement that every listed vehicle uses the same plug or that every feature of the original system is retained. The main ECU guide also lists terminated Barra, GM LS1/LS6 and LS2/LS3, Honda K, Mazda 13B, Nissan RB and Toyota 2JZ harnesses.

Historic models and related controllers

Archive entries establish names, not interchangeability. In particular, E6 suffixes, Platinum Pro application boards and fuel-only or ignition-only devices must be identified individually. See the discontinued product index, historic wiring archive and download centre.

DesignationIdentification note
Elite 950Earlier Elite unit; manufacturer lists it with the 750 for features such as long-term fuel learning.
Elite 1000Earlier Elite model; see its own downloaded documents and hardware connections.
Elite 2000Earlier Elite model; Haltech describes it as the next step up from the 950 for an eight-cylinder direct-fire build.
Elite REMApplication-specific Elite designation in the manufacturer archive.
Elite VMSIgnition-only vehicle management unit; not a fuel-injection ECU.
Elite VMS-TIgnition-only vehicle management unit with torque management; not a fuel-injection ECU.
Elite FalconVehicle-specific unit; check exact Ford application and documentation.
Platinum Sport 2000Legacy Platinum Sport unit listed in Haltech's discontinued archive.
Platinum Sport 1000Legacy Platinum Sport unit; do not substitute another model's loom diagram.
Platinum Sprint 500Legacy Sprint ECU in discontinued archive.
Platinum Sprint RELegacy rotary-related Sprint designation; use its own manual.
Platinum ProVehicle-specific plug-in series; identify the exact board and application.
E11V2Historic E-series ECU; independently identify the version.
E8Historic E-series model.
E6XHistoric E6-family model.
E6SHistoric E6-family model.
E6MHistoric E6-family model.
E6KHistoric E6-family model.
E6HHistoric E6-family model.
E6GMXHistoric GM-labelled E6-family variant.
E6GMHistoric GM-labelled E6-family variant.
E6AHistoric E6-family model.
E6Historic E6 model; suffixes are separate identities.
F10XHistoric F-series fuel controller; establish its ignition provision separately.
F10Historic F-series fuel controller.
F9Historic F-series fuel controller.
F7Historic F-series fuel controller.
F3Historic F-series fuel controller.
IG4 / IG5Historic ignition controllers, included for identification; not assumed to be complete injection ECUs.
Platinum InterceptorPiggyback controller, included for identification; not a standalone replacement ECU.

Software and workshop identification

  • Record the full model/part number, serial, firmware, connector layout and loom. A same-brand replacement may require repinning.
  • Nexus S-series uses Nexus Software Programmer (NSP); consult Haltech downloads for matching software and old-generation manuals. Do not infer that archived E/F hardware runs current Nexus software.
  • Factory adaptors and direct boards inherit vehicle-specific pin assignments; the universal Elite 1500 table below does not establish plug-in wiring.

Example pinout: Elite 1500 connector A, 34-way

Numbering as viewed into the ECU header; the mating connector contact face is a mirror view. Confirm molded cavity numbers. This is specific to Elite 1500, not an Elite 2500 pinout. Haltech 34-pin table; connector and wiring documentation.

PinFunction
1DPO 2
2AVI 4
3–6Ignition 1–4
7–8Not assigned
9+5 V sensor supply
10–11Battery ground
12+8 V sensor supply
1312 V ignition input
14AVI 10 (TPS)
15AVI 9 (MAP)
16AVI 2
17AVI 3
18DPO 1
19–22Injector 1–4
23DPO 3
24DPO 5 / fuel pump trigger
25DPO 6 / engine control relay
26ECU injector power input
27–30Not assigned
31–34Stepper 1 phases 1–4 / DPO

A26 injector power is required for ECU operation. Confirm the 26-way B connector, driver limits, relay circuits and configured functions in the manufacturer documentation.

Further documentation

Sources reviewed 17 November 2026.

Honda Nexus direct plug-in ECUs

These are two vehicle-specific manual-transmission applications with different connector assignments; each linked page contains its own Haltech wiring chart and 26-way auxiliary table.

Explore this branch

Haltech E6Haltech E6 historical controller identification and model-specific documentation.Haltech E6AHaltech E6A historical controller identification and model-specific documentation.Haltech E6GMHaltech E6GM historical controller identification and model-specific documentation.Haltech E6GMXHaltech E6GMX historical controller identification and model-specific documentation.Haltech E6HHaltech E6H historical controller identification and model-specific documentation.Haltech E6KHaltech E6K: identification, model features and documented wiring.Haltech E6MHaltech E6M historical controller identification and model-specific documentation.Haltech E6SHaltech E6S historical controller identification and model-specific documentation.Haltech E6XHaltech E6X: identification, model features and documented wiring.Haltech E8Haltech E8: identification, model features and documented wiring.Haltech E11V2Haltech E11V2: identification, model features and documented wiring.Haltech Elite 550Elite 550 identification, output counts, wiring and software references.Haltech Elite 750Elite 750 identification, output counts, wiring and software references.Haltech Elite 950Haltech Elite 950: identification, model features and documented wiring.Haltech Elite 1000Haltech Elite 1000: identification, model features and documented wiring.Haltech Elite 1500Elite 1500 identification, output counts, wiring and software references.Haltech Elite 2000Haltech Elite 2000: identification, model features and documented wiring.Haltech Elite 2500Elite 2500 identification, output counts, wiring and software references.Haltech Elite 2500TElite 2500T identification, output counts, wiring and software references.Haltech Elite FalconHaltech Elite Falcon identification and manufacturer firmware documentation.Haltech Elite VMSHaltech Elite VMS ignition-only controller specifications and 34-way pinout.Haltech Elite VMS THaltech Elite VMS T ignition-only controller specifications and 34-way pinout.Haltech F3Haltech F3 historical controller identification and model-specific documentation.Haltech F7Haltech F7 historical controller identification and model-specific documentation.Haltech F9Haltech F9 historical controller identification and model-specific documentation.Haltech F9AHaltech F9A historical controller identification and model-specific documentation.Haltech F10Haltech F10 historical controller identification and model-specific documentation.Haltech F10XHaltech F10X historical controller identification and model-specific documentation.Haltech IG4Haltech IG4 identification, model-specific documentation and wiring context.Haltech IG5Haltech IG5 identification, model-specific documentation and wiring context.Haltech Nexus R3Nexus R3 identification, output counts, wiring and software references.Haltech Nexus R5Nexus R5 identification, output counts, wiring and software references.Haltech Nexus Rebel JZHaltech Nexus Rebel JZ identification, model-specific documentation and wiring context.Haltech Nexus Rebel KHaltech Nexus Rebel K identification, model-specific documentation and wiring context.Haltech Nexus S2Nexus S2 identification, output counts, wiring and software references.Haltech Nexus S3Nexus S3 identification, output counts, wiring and software references.Haltech Nexus T1Nexus T1 identification, output counts, wiring and software references.Haltech Nexus T2Nexus T2 identification, output counts, wiring and software references.Haltech Platinum Sport 1000Haltech Platinum Sport 1000: identification, model features and documented wiring.Haltech Platinum Sport 2000Haltech Platinum Sport 2000: identification, model features and documented wiring.Haltech Platinum Sprint 500Haltech Platinum Sprint 500: identification, model features and documented wiring.Haltech Platinum Sprint REHaltech Platinum Sprint RE: identification, model features and documented wiring.

Directly applicable articles