Tuning Wiki

The Adaptronic eMod003 is an application-specific plug-in programmable engine-management ECU. Haltech's surviving Adaptronic downloads archive identifies the application as Nissan S14 Silvia 72-pin; the archive also names S13 CA18DET in the pinout filename. The part number identifies a family of applications, not an unconditional guarantee of vehicle compatibility. Haltech Adaptronic downloads archive.

Application and installation

Identify the vehicle, engine, connector and wiring variation before installation. Plug-in installation can still require additional sensor and actuator wiring, and tuning to suit the specific engine. The manufacturer archive provides the Adaptronic plug-in ECU startup guide and EUGENE tuning software.

Model-specific pinout

In the eMod003 section of the manufacturer download archive, find: S14_200SX_Silvia_SR20DET_S13_CA18DET_Pinout.pdf. Open the matching vehicle-specific diagram; connector or pin functions cannot safely be inferred from a different eMod or a different application. The archive also lists the following basemap resource: eMod003_S14_SR20DET_v001.ecu.

Documentation limits

Complete channel counts and additional variants have not been independently verified for this exact model. Haltech's Adaptronic notice records the end of Adaptronic operations in 2022; use the archived documentation and confirm present support before purchasing a used ECU.

Manufacturer plug-in connector pinout

Transcribed from Adaptronic's eMod003 S14 SR20DET / S13 CA18DET pinout, retained in Haltech's archive. Connector view is looking into the ECU. The table records the Adaptronic assignment, which can differ from the original factory function; consult the source and its model-specific notes before connecting. Pins designated Module 1 depend on any upgrade board installed.

Positions 101–116

PinAdaptronic function in source
101Injector output 1
102Auxiliary output 4
103Injector output 3
104Ignition output 6
105No connection
106Auxiliary output 1
107Power ground
108Power ground
109Injector supply
110Injector output 2
111Ignition output 5
112Injector output 4
113Injector output 5
114Auxiliary output 2
115Power ground
116Power ground

Positions 1–60

PinAdaptronic function in source
1Ignition output 1
2Ignition output 2
3No connection
4Auxiliary output 1
5Oil pressure
6Ignition output 8
7Tachometer output
8Oil temperature
9Injector output 7
10Power ground
11Ignition output 3
12Ignition output 4
13Fuel pressure
14CAN low
15CAN high
16ECCS hardwired
17Fuel temperature
18ECCS / fuel pump control output
19Injector output 8
20Servo input
21External 0–5 V input 1
22External 0–5 V input 2
23Knock input
24Module 1: function depends on fitted upgrade
25Injector output 6
26Exhaust MAP
27Exhaust MAP
28Coolant temperature
29Oxygen input 1
30Sensor ground
31Module 1: function depends on fitted upgrade
32Auxiliary output 4
33Ignition output 7
34Digital input 4
35Internal MAP
36Manifold air temperature
37TPS input 2
38TPS input 1
39Oxygen input 2
40Module 1: function depends on fitted upgrade
41CAS 2
42CAS 1
43No connection
44Digital input 2
45Ignition switch input
46Digital input 3
47CAS 3
485 V output
4912 V power input
50Power ground
51CAS 2
52CAS 1
53Vehicle speed input
54Digital input 1
55Module 1: function depends on fitted upgrade
56Module 1: function depends on fitted upgrade
57Module 1: function depends on fitted upgrade
58No connection
5912 V power input
60Power ground

Manufacturer connector diagram and ECU photograph

Adaptronic eMod003 manufacturer ECU and pinout for Nissan S14 and S13
Adaptronic eMod003 manufacturer photograph and connector diagram for S14 SR20DET and S13 CA18DET, looking into the ECU. Source: Adaptronic / Haltech archived pinout; reproduced with permission. Confirm the model, engine, vehicle wiring and variant before use.

Connector pinout

A structured, redrawn pin diagram of this connector is available at Adaptronic eMod003 connector pinout. Diagram redrawn by Tuning Wiki from the Adaptronic eMod003 pinout.

Directly applicable articles