Autronic SM4DCMR is a standalone or earlier programmable engine-management system. Dual-calibration marine SM4 version, separately documented in the manufacturer's SM4MR pinout table. Model-specific information.
Identification and features
Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.
Processor
Autronic's SM4MR product page (manufacturer documentation) gives a 16-bit Intel microcontroller running at 20 MHz for the marine SM4. A separate SM4DCMR product page was not found, so the same figure is taken from the SM4MR platform. The exact part number is not stated.
Engine applications
The marine SM4 was originally developed for international personal watercraft racing and suits off-road racing and other high-performance motorsport. Per Autronic it supports most reciprocating engines of 1 to 8, 10, 12, 14 and 16 cylinders and two-rotor rotary engines, with turbo boost control, eight injector drivers in two groups of four and four push-pull ignition outputs with mappable dwell. Manned-aircraft use is prohibited. No engine codes are listed.
Connector pinout
The 42-position function table is on the Autronic SM4 connector pinout page, which covers the SM4, SM4DC and SM4 Marine versions with the standard SM4 loom (manufacturer documentation; diagram redrawn by Tuning Wiki). On dual-calibration versions pin 39 selects calibration rather than HSI3. Use the original connector drawing for orientation and output limitations.
Further information
Sources
- Autronic SM4MR product page. Manufacturer. Accessed 19 November 2026.