Tuning Wiki
Renault Grand Scénic III 1.5 dCi
A 2014 Renault Grand Scénic III 1.5 dCi. The Grand Scénic III is among the models tool-listed with SID307; the fitted controller of this car is not known. Image: Mr.choppers, CC BY-SA 3.0, via Wikimedia Commons.

Identity

SID307 is a Continental common-rail diesel controller in the SID family. Three independent tool vendors list it with an Infineon TriCore TC1767 processor: Abrites in its ECU compatibility table and in its programming tool manual, AutoTuner in its compatibility list, and the VF2 Flasher release notes, which describe 2 MB of internal flash and 64 KB of internal EEPROM. Abrites compatibility list; VF2 Flasher v2.0.0.0 release notes. These are tool listings, not Continental documentation.

Tool-listed applications

The VF2 Flasher vehicle list names SID307 on the K9K 1.5 dCi in these Renault examples:

VehiclePowerYear
Grand Kangoo II66 kW and 80 kW2013; 66 kW also 2016
Kangoo II80 kW2013
Mégane III82 kWnot stated
Scénic III and Grand Scénic III81 kW2010
Scénic III78 kW2011
Scénic X-Mod III81 kW2013

Abrites lists SID307 TC1767 on the Grand Kangoo 1.5 dCi five-speed manual for 2013 and 2014. The same VF2 release also mentions Dacia and Mercedes-Benz SID307 cloning functions without naming engines. The Abrites programming tool manual lists SID307 for Dacia, Renault, Nissan, Opel and Mercedes-Benz.

Tool access

The VF2 release notes list OBD read, write, recovery and checksum functions for Renault SID307, including internal flash and EEPROM. Tool support changes between versions; check the current documentation for the exact vehicle and software before reading or writing.

Identification limits

Model, year and engine family do not identify the controller: the same models also appear with SID305, Delphi DCM 3.4 or Bosch controllers in other lists. Read the ECU label and its hardware and software identification. A file, checksum method or injector procedure for SID307 does not transfer to another SID number.

Connector pinout

The Abrites programming tool manual (section 8, page 133) contains a boot-mode connection diagram for SID307 that marks, on a three-connector ECU face, the cavities used for bench wiring. It is a tool vendor's bench-wiring illustration rather than a full connector pinout.

Related pages

Sources

  • Abrites, ECU compatibility list, Renault Grand Kangoo 1.5 dCi entries. Accessed 19 November 2026. Tool coverage, not a build record.
  • VF2 Flasher, v2.0.0.0 release notes, March 2018. Accessed 19 November 2026. Historical tool coverage.
  • Abrites, ECU programming tool user manual, 2026, section 8 "ECU Connections - PIN OUT Diagrams and Boot". SID307 TC1767 listing and boot-connection diagram. Accessed 19 November 2026.
  • AutoTuner ECU compatibility list, export dated 28 October 2026. Tool-vendor MCU listing (TC1767). Accessed 19 November 2026.

Directly applicable articles

Shared family guidance

From parent families. Broader context does not establish compatibility with this ECU or software version.