
Model and vehicle application
Syvecs lists this vehicle-specific standalone or plug-in ECU kit as Toyota Supra 1998-2000 VVTi S7-I, with product code S7i-TSUPRAV. The product page and its stated vehicle, model and transmission details define this particular application; confirm market, model year, engine, ECU connector and transmission against Syvecs before ordering.
This entry describes the dedicated vehicle kit. It is distinct from the generic wire-in ECU: a plug-in kit can use application-specific adaptor wiring, a carrier, additional modules and an application calibration. The listed hardware or supported equipment can vary by revision.
Wiring and pinout
Source conflict: The manufacturer-hosted S7-I PDF lists an S7-I in its kit contents, but labels its pin table “S7Plus Kit” and also refers to S7Plus and S6Plus elsewhere. Its pinout cannot be assumed correct for this S7-I unit without confirmation. Ask Syvecs for the exact carrier and hardware-revision wiring schedule.
For other variants and manual revisions consult the manufacturer's vehicle-specific manual index. Available spare inputs and outputs can be used only within their electrical limits and with a matching calibration.
Calibration and service
Use the correct Syvecs software, firmware and base calibration for the exact vehicle and installed hardware. The Syvecs software portal and firmware archive provide manufacturer support. A base map is a starting point and needs checking against the actual engine, injectors, sensors and modifications.