Tuning Wiki
Haltech Nexus R5 vehicle control unit
Haltech Nexus R5 VCU. Image: Haltech, reproduced with permission.

Haltech Nexus R5 is a programmable vehicle control unit with engine management in Haltech's Nexus family. VCU incorporating power distribution, onboard inertial sensor and four 25 A high-current outputs. Its 18 peak-and-hold injection outputs allow additional injectors in staged installations. Haltech universal comparison.

Identification and I/O

ItemManufacturer comparison
Injector channels18, peak-and-hold
Ignition channels12
Digital pulsed outputs8
MAP sensorExternal
Tuning softwareNexus Software Programmer (NSP); verify installed firmware

Counts do not imply that all functions are available simultaneously: driver allocation, injector impedance, ignition type, firmware and calibration must suit the installation.

Pinout and wiring

Use the manufacturer wiring diagrams and select the Nexus R5 ECU and actual harness or part number. Drawings for other models and plug-in adaptors are not a substitute for the identified unit. Verify connector orientation, power and grounds, current limits and output assignment before connection.

Software and further information

Download the matching software and firmware through Haltech downloads. For family context and other models see Haltech standalone ECUs. Compare the label, serial, connectors and map backup before replacing a controller.

Directly applicable articles

Technical articles assigned to this context will appear here.

Shared family guidance

From parent families. Broader context does not establish compatibility with this ECU or software version.