Tuning Wiki

An early turbo-fuel-control product designed by FuelTech founder Anderson Dick before the company’s 2003 registration. Its full wiring and ignition capabilities are not established by the historical account; it is retained as a fuel-controller precursor, not assumed to be a complete fuel-and-ignition ECU. FuelTech primary source.

Identification and wiring

Record the precise controller and hardware before wiring. The original installation document must be matched to the unit and connector; no pin assignments are inferred from later FuelTech models. FuelTech Portuguese manuals index · English manuals.

See FuelTech ECU family. Sources reviewed 17 November 2026.

FuelTech also documents the separately designated TurboPRO-1F+, including an eight-way harness chart. The available 1F+ manual does not establish that the original 1F has the same assignments.

FuelTech TurboPRO-1F+ controller
TurboPRO-1F+ shown as a related-model illustration; this is not a confirmed image of the original 1F. Photograph from the FuelTech 1F+ installation manual, reproduced with permission.

Directly applicable articles

Technical articles assigned to this context will appear here.

Shared family guidance

From parent families. Broader context does not establish compatibility with this ECU or software version.