Tuning Wiki
Browse Infiniti

This guide concerns the Infiniti Q50 and Q60 equipped with the 3.0-litre twin-turbo VR30DDTT, using a 2016 Q50 factory example and a separate 2018 Q50 logging report. Identify the market, engine, controller, calibration and transmission before applying any example; similarly named VQ37 and other Q50 engines use different systems.

Vehicle and support identification

Infiniti describes the North American 2016 Q50 VR30 as a direct-injection twin-turbo V6 offered in 300 hp and 400 hp versions, with a seven-speed electronically controlled automatic. Drive mode and adaptive shift control can affect gear selection. These are vehicle specifications, not proof that HP Tuners can calibrate the transmission on every model. Infiniti: 2016 Q50 engine and transmission.

HP Tuners' Nissan and Infiniti list identifies 2016-24 Q50 and 2017-22 Q60 VR30DDTT applications, and also has a separate 2021 Q50/Q60 VR30 row with a different credit count. Do not choose a licence solely from the overlapping model-year rows: verify the actual ECU, software, VIN and current device and licensing requirements with HP Tuners. The ECM listing does not establish TCM tuning or every data channel for every vehicle.

Enhanced logging: check the ECU and channel definition

In 2019 an HP Tuners vendor account announced Q50/Q60 VR30 enhanced PIDs associated with an operating-system modification enabling Mode 23. The historical list included electronic wastegate A/B position, estimated charge-air temperature, turbo speed for each bank, indicated torque and high-pressure fuel-pump control terms. This is not proof of their availability, names, calibration or scaling in every present-day file. Confirm the ECU version, operating-system requirements and current HP Tuners instructions before applying an OS modification; record codes and keep the vehicle's original supported read first. 2019 enhanced-PID announcement.

A channel name is not a sensor-fitment guarantee. The 2016 US Infiniti brochure lists turbo-speed sensing on the 400 hp version, while the 300 hp specification is presented separately. The 2016 US/Canada engine-control manual identifies bank-specific speed sensors for the higher-pressure model. Confirm actual hardware and channel validity on the vehicle: an absent, zero or estimated channel does not by itself prove a failed turbo.

2018 Q50 knock-feedback question

An HP Tuners user reported an enhanced-stream "knock feedback" channel oscillating at idle, cruise and load on a VR30; the attachment was labelled 2018 Q50 Luxe. A respondent offered an interpretation but expressed uncertainty about the Infiniti strategy. The linked tune and log could not be independently validated, and the report does not establish a reliable knock threshold, a correction formula or a proven cause. 2022 LS1Tech report.

Before calling an oscillating signal knock or timing retard, obtain the actual channel definition, units, scaling, sign and operating conditions from HP Tuners for that ECU and version. Compare the time trace with engine speed, load, throttle, ignition timing and other verified knock-related signals; check sensor and wiring condition where relevant. Histogram averaging cannot turn an undefined signal into a validated knock measurement. Use appropriate independent knock-monitoring equipment and controlled testing; do not reduce factory knock sensitivity to make a trace look cleaner.

Compare both banks, pressure and fuel delivery

Where the specific vehicle exposes meaningful values, record requested and measured manifold or charge pressure with their locations and absolute/gauge units; electronic wastegate A/B channels and their definitions; engine speed, load, intake and coolant temperatures; commanded mixture and a correctly configured independent wideband; and requested and actual high-pressure rail pressure. Determine whether a wastegate channel is a command, modelled value or measured feedback. A pump control term is not itself measured fuel pressure, and rail pressure alone does not prove injector delivery or safe mixture.

Check the hardware and operating conditions before comparing banks: sensor availability, pressure reference, actuator or linkage condition, air leaks, injector and fuel-supply condition and sample timing can all matter. Do not assume values from a replacement turbo, another ECU or another tuning product can be transferred directly. Avoid setting a universal boost, turbo-speed or mixture target from an owner post.

Service changes and the seven-speed gearbox

Infiniti's ITB22-038D turbocharger replacement bulletin applies to specified VR30 Q50/Q60 vehicles when turbo replacement has been confirmed. It calls for checking whether ECM reprogramming is required, with defined model-year and part-number conditions. Check the latest bulletin and VIN-specific service data: a turbo repair may change the software baseline, and this is an OEM repair procedure rather than an HP Tuners tuning instruction.

If a shift complaint accompanies an engine change, log driver mode, pedal, engine and road speed, requested and actual gear, and converter-clutch command/slip or transmission temperature only where available and understood. Differentiate a gear request from the shift event or lockup. An engine ECU listing and a seven-speed gearbox specification do not prove that TCM calibration is supported.

  1. Record DTCs and freeze-frame before reading; HP Tuners warns that a vehicle read can clear DTCs. Document controller IDs, operating system, fuel, modifications and baseline log. Save the supported vehicle's own original read. HP Tuners: getting started.
  2. Build a vehicle-specific channel list and verify that each channel actually updates. A Scanner layout does not add channels automatically. HP Tuners: layouts and channels.
  3. Investigate faults and hardware before tuning around a symptom, document each understood change and compare fresh logs under equivalent conditions.

Not established

The definition and scaling of the VR30 "knock feedback" channel are not documented, and TCM calibration support is unconfirmed.

Related: Infiniti Q60 models and engines; VQ35HR/VQ37VHR guide; VCM Scanner; HP Tuners MPVI4.

Continue the conversation

If this topic interests you, consider joining the following forums. They host material referenced in this article.