ABS and traction systems · SCS Delta ABS · Motorsport overview
SCS Delta calls its Motorsport ABS a universal standalone ABS kit for track use. Its product page describes a hydraulic modulator with integrated controller, loom, four active wheel-speed sensors, two brake-pressure sensors, inertial sensor, slip-position switch and warning light. SCS says it pre-programs the kit using vehicle information. SCS Delta Motorsport ABS.
Sensor integration
SCS states that the wheel-speed sensors connect directly to its ABS controller and that wheel speeds are provided to other equipment over CAN and individual outputs. This is a manufacturer-specific integration arrangement; do not assume that an existing sensor can simply be shared. SCS Motorsport ABS FAQ.
Installation and identification
Record the supplied module and harness identifiers, car details and calibration. Confirm the brake-circuit arrangement, mounting, sensor compatibility, configuration, warning indications and commissioning with SCS; verify competition and intended-use restrictions.
Connector reference
The Delta ABS data sheet identifies a 38-pin main HCU allocation specifically for Gen 2 Rev. 3. Its user manual separately documents the 12-pin auxiliary connector on the described second-generation kit loom; it does not separately label that auxiliary table Rev. 3. Confirm the module revision, loom and connector-face orientation before use. Gen 2 Rev. 3 main connector and second-generation auxiliary connector pinouts.
Supplier-listed wheel-speed sensor examples
Delta ABS USA lists tested original sensor examples for Alfa Romeo 4C, BMW E46 and E90, BMW F20 116i/118i, Chevrolet Corvette C6 ZR1 and C7, Lotus Evora, Nissan 350Z Z33, Peugeot 208 GTI, Porsche 997, Renault Clio 197/200, Toyota GT86/Scion FR-S ZN6 and Subaru BRZ ZC6, Vauxhall Astra J and VW Golf Mk5. These are supplier-stated sensor examples for potential retrofit use, not claims of complete plug-and-play vehicle compatibility or factory installation of Delta ABS. The supplier requires a working oscilloscope trace to verify the actual sensor and specifies 7/14 mA two-wire active operation. Delta ABS USA FAQ.
Individual motorsport vehicle examples
A 2026 seller description for a BMW E36 GTR S54 race car identifies SCS Delta Motorsport ABS V2 as installed; this is the seller’s description of one modified car, not evidence of a factory fitment or a generic E36 kit. BMW E36 GTR S54 advertisement.
A separate seller description for a Cupra Competición TCR race car lists an SCS Delta ABS system and related loom as part of the car’s equipment. The supplier revision is not stated, so do not assume the Gen 2 Rev. 3 HCU pinout applies. Cupra Competición TCR advertisement.
Public CAN information
SCS lists wheel speeds, slip-switch position, brake pressures and brake bias as values transmitted over the system's public CAN bus for compatible ECUs, displays and loggers. The product description does not specify message IDs or scaling; obtain the correct CAN specification for the installed system revision before configuring another device. Source: SCS Delta Motorsport ABS product information.