Tuning Wiki

Bosch ECUs in the catalogue

Current catalogue identities from TuningService. Select an ECU for its recorded part numbers, applications and wiki references.

1 catalogue record

Open Bosch catalogue

Vehicles and engines in the Bosch application catalogue

The following listings are printed against this exact management designation in the Bosch Australia vehicle component applications catalogue. The dates are that catalogue's production window for the listing. They do not show that every market, body style or software version used the same ECU, and they do not establish a part number or pinout. Listings that printed more than one designation are omitted.

VehicleEngine codeBuild datesPrinted system
Alfa Romeo 33 AR907AR307471990–1994Motronic (ML4.1)
Alfa Romeo 75AR062241987–1992Motronic (ML4.1)
Alfa Romeo 164AR064121988–1992Motronic (ML4.1)
Alfa Romeo 164AR643011990–1992Motronic (ML4.1)

Source: Bosch Vehicle Component Applications, independent PDF mirror; accessed 2026-11-17.

Engine sizes and control unit numbers

The catalogue's component lists give the following engine sizes and Bosch control unit numbers. They are parts-application numbers for the listed vehicle, not hardware or software revisions.

  • Alfa Romeo 33, AR907 [16v] (AR30747): four cylinders, 1.7 litres; control unit 0 261 200 147.
  • Alfa Romeo 75, AR162 Twin Spark (AR06224): four cylinders, 2.0 litres; control unit 0 261 200 108.
  • Alfa Romeo 164, AR164 [12v] (AR06412): V6, 3.0 litres; control unit 0 261 200 117.
  • Alfa Romeo 164, AR164 [24v] (AR64301): V6, 3.0 litres; control unit 0 261 200 130.

A parts-seller listing pairs 0 261 200 130 with the 164 3.0 V6 QV 12-valve, which differs from the catalogue's 24-valve pairing; the Bosch catalogue is the better-supported source for the part number, but the valve-count assignment of 0 261 200 130 is unresolved.

ML4.1 in other applications

Wikipedia's Motronic article states that ML4.1 was also used on Opel and Vauxhall eight-valve engines from 1987 to 1990 (listing 20NE, 20SE, 20SEH, 20SER, C20NE, C30LE and C30NE) and on some PSA XU9J engines. This is a secondary source; those applications are not in the Bosch catalogue listing above. The article describes a single output for all injectors, which fire together, and no provision for a knock sensor.

Not established

The processor and a published connector pinout for ML4.1.

Sources

Indexed under Bosch ML4.

Directly applicable articles

Technical articles assigned to this context will appear here.