Tuning Wiki

Haltech E6K is a E series programmable engine-management model. Haltech's E6K specification describes programmable fuel and ignition, staged and up-to-four-bank sequential injection modes, eight injector drivers and four dedicated PWM outputs. Trigger inputs support several sensor types and patterns; ignition and injection resources must be allocated for the engine. Manufacturer specification or guide.

Identification and output allocation

Record the full ECU label, serial number, hardware or harness revision, software and existing calibration. These characteristics are model-specific; a superficially similar E series ECU should not be treated as a drop-in replacement. Counts can be limited by shared outputs, external modules and the engine's ignition and injection strategy.

Model-specific pinout and wiring

Consult the E6K wiring documentation and the historic model manuals and connector archive where applicable. Select the named model and the precise harness revision; read its numbered connector view, driver characteristics, injector supply, power and ground notes. The connector appearance alone is not proof of identical pin functions.

Software and further information

legacy software matching the model. Haltech's download centre separates software and provides a legacy section. See Haltech standalone ECUs for the other families.

Manufacturer connector schedule

These are the 36 positions from the Haltech E6K main harness wiring diagram. The diagram identifies the ECU connector as Packard 1211 0490 and the main harness as revision F, 15 December 2000. It depicts a separate nine-way PC interface, with pins 2 TX, 3 RX and 5 ground. This schedule is specific to the E6K; similarly numbered positions differ on the E6K and E6X. The diagram also documents the harness-side sensor, ignition, injector and relay connectors.

ECU pinFunctionHarness colour where documented
1Spare A/DRed/black
2O2 sensorGrey, shielded
3PWM out 2Pink/black
4PWM out 1Violet/white
5Road speedGrey/yellow, shielded
6TriggerYellow, shielded
7Input BRed, shielded
8TXRed, shielded
9RXBlue, shielded
10TrimBlack/white
11MAPYellow
12Input ABlue, shielded
13HomeGreen, shielded
14IDL 4Brown/white
15IDL 3Yellow/red
16IDL 2Green/yellow
17IDL 1Brown
18+5 V DCOrange
19Injector 1Light blue
20Injector 2Blue/red
21Injector 3Green/red
22Injector 4Pink
23PWM out 3Blue/green
24PWM out 4Green/white
25+13 V DC ECURed/white
26GroundBlack
27Auxiliary outGreen/black
28Auxiliary inGreen
29Air temperatureGrey
30CoolantViolet
31Throttle positionWhite
32GroundBlack
33Pump relayBlack/yellow
34Digital out 2Blue
35Digital out 1White/black
36Ignition outLight green

Directly applicable articles

Technical articles assigned to this context will appear here.

Shared family guidance

From parent families. Broader context does not establish compatibility with this ECU or software version.