Injector catalogue › Petrol › Port | Direct | Diesel
Petrol injectors are organised here by where the nozzle delivers fuel. Port injectors meter fuel into the intake; gasoline direct injectors deliver it into the combustion chamber. Some engines use both. Identify the complete part, not only its connector or colour.
For how the ECU operates these injectors, see port injector flow, dead time and driver compatibility and port injection modes and timing. Petrol direct injection and combustion modes covers the direct-injection system separately.
Nozzle and spray matching
An electrically controlled port injector meters fuel through a valve and nozzle as its driver commands it. The resulting spray depends on the nozzle and its installation, not only the injector’s rated flow. Bosch describes how the number and position of the nozzle orifices and the injector’s orientation are selected for a particular intake and mixture formation. Bosch: manifold fuel injector.
For example, Bosch Motorsport lists conical and two-spray versions of its EV 14 family, with different spray and bend angles. Its EV 14 product data and datasheet define the angles and orientation for that family. Equal flow and a matching connector do not establish equivalent targeting, fit, electrical drive or calibration. Check the exact part and installation against its supplier’s information.
During a bench test compare the pattern with the specification or a known-good example at the same pressure, fluid and drive conditions. An asymmetrical spray may be intentional; droplets, missing streams or leakage need investigation in context. Injector test results explains how to record the conditions.
Browse the catalogue
- Petrol injector testing with ASNU — workshop testing, results and servicing guides.
- Petrol port injector catalogue — Bosch EV 6/EV 14, Siemens Deka, Toyota/Denso and Injector Dynamics examples.
- ASNU performance injector catalogue — selected part numbers, spray angles and ASNU's illustrated catalogue.
- Petrol direct injector catalogue — Bosch HDEV and Siemens/Continental GDI identification.


Comparing ratings
A port injector's cc/min figure needs a test liquid, temperature and pressure difference to be meaningful. Static flow does not define the electrical offset or short-pulse delivery needed by the ECU. Direct-injection parts need their own high-pressure and pulse-specific test conditions. Bosch's injection-valve information explains static-flow pressure conversion and voltage-dependent delay; Bosch's HDEV 5.2 datasheet illustrates the separate GDI operating conditions.
See also: Automotive fuel injector testers and noid lights for electrical signal checks, injector testing methods and equipment examples.
See also: Automotive injector cleaning and flow testing machines for bench methods, equipment examples and diagnostic limitations.