Tuning Wiki

Injector catalogue › Petrol › Port | Direct | Diesel

ASNU's 2026 Performance Products Catalogue is the primary reference for its own performance petrol port injectors. The full 24-page document includes images of injector ends and adapters and example installations. ASNU's catalogue download page is the alternative route to the document. This page is a selective index, not a copy of the complete catalogue.

Selected basic injector numbers

These are the catalogue's basic part numbers and nominal “injector cc” labels on page 4, with its spray angle. The table does not give the flow-test pressure or test fluid beside the values; obtain the exact test conditions and injector-specific calibration from ASNU before comparing or using the numbers as ECU data. The number is a basic configuration: end caps, seals, rail couplings and harness adaptors affect the finished fitment.

ASNU basic part numberNominal flow label (cc/min)Spray angle
ASNU090/30030010°
ASNU090/40040020°
ASNU090/60060020°
ASNU090/80080030°
ASNU090/10001,00030°
ASNU090/10501,05030°
ASNU090/P12501,25030°
ASNU090/2000/13001,30025°
ASNU090/2000/14001,40025°
ASNU090/2000/15001,50025°

Identifying the physical version

ASNU's 2026 catalogue pages 8–13 show its A, B, C and other ends beside example original injectors. Page 8 gives Mitsubishi Evo 5–9, Mazda RX-8 and Toyota JZX100 as examples for its A-cap family; page 9 lists Mini W11, Nissan R35 GT-R and Honda K20 among B/C-cap examples. These are family examples, not a claim that every injector or configuration fits every version. Match the complete order code, seal diameters, seat-to-seat length, nozzle position, electrical connector and spray direction with ASNU before ordering.

Page 14 describes its higher-flow 2000 series; page 15 describes its Classic replacements for older injector installations. The manufacturer uses coloured identification rings for flow and spray angle, but the full number and applicable configuration remain the reliable starting point. See the ASNU performance-injector information and fuel-use conditions for fuel compatibility and flushing requirements; compatibility is product and service-condition specific.

Source

ASNU Performance Products Catalogue 2026, especially pages 4, 8–15; ASNU catalogue index. Accessed 14 November 2026.