Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
MegaSquirt and MS3Pro standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
MSPNP-Pro B8793 installation in a BMW E30
MSPNP-Pro B8793 fitted to a BMW E30. Installation image: AMP Engine Management; reproduced with permission.

MS3Pro PNP is a MegaSquirt-family engine-management product. Application-specific MS3Pro PNP / MSPNP-Pro controllers connect to selected factory looms. Each application has a different installation and jumper guide and must be identified by its part number. Model source.

Identification and software

Record the ECU label, processor generation, board revision, firmware and installed hardware modifications. Calibration software and firmware must match the hardware. DIYAutoTune software and firmware · Model-specific information.

Wiring and pinout

Use the matching model document and wiring or support reference; the manufacturer manual index distinguishes wire-in and vehicle-specific variants. Check connector orientation, wiring changes, fuse ratings and output configuration before connecting loads; matching cases or software families do not establish identical pin functions.

See the MegaSquirt and MS3Pro family guide. Sources reviewed 17 November 2026.

Vehicle-specific model pages

Match the vehicle engine, transmission, model year, harness and ECU generation; similar part suffixes can refer to different hardware.