Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
ABS / DSC
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Bosch, Continental, Haltech, MoTeC, Racelogic, RaceTCS, SCS Delta

Changes from revision 2 to revision 10

Removed text is struck through; added text is highlighted.

ABS and traction systems directory · Bosch · ATE / Teves / Continental · Other manufacturers · Motorsport and standalone

Motorsport ABS controls hydraulic brake pressure to manage wheel lock under braking. Traction control limits driven-wheel spin under power, commonly through engine torque intervention. A standalone traction controller or engine ECU feature is not by itself a hydraulic ABS or a complete stability-control system.

A documented motorsport applicationThe Ford Mustang Dark Horse R is an example of a race car equipped with motorsport ABS. Ford’s 2024 owner’s manual specifies a Bosch Motorsport M5 Race ABS system with a Dark Horse R-specific calibration; the picture shows the vehicle, not the ABS unit. Ford Performance owner’s manual. Photo of Alex Bachoura’s car by SmackJam, Wikimedia Commons, CC BY-SA 4.0; unmodified.

Motorsport and standalone ABS

Manufacturer and modelWhat the source identifies Bosch Motorsport ABS M4 Kit / M4 ClubsportEarlier motorsport kit documented in Bosch's archive. M4 is distinct from M5; Bosch's M5 manual warns that M4 pressure sensors are not compatible with M5. Bosch M4 Clubsport; M5 manual. Bosch Motorsport ABS M5 Kit 1, Kit 2 and ClubsportBosch specifies front-, rear- and four-wheel-drive use and describes differences between kits, including loom, map selection and optional functions. Four compatible active wheel-speed sensors and the specified pressure and motion sensors are part of the system design. Do not reuse an M4 loom or sensors without checking the M5 manual: Bosch warns of damage from incorrect wiring or sensors. Bosch M5 product and manual. Continental Engineering Services RSX ABSA motorsport adaptation based on Continental MK 100 with a front/rear brake-circuit split and balance-bar application described in its technical manual. It includes a hydraulic/electronic control unit, motion sensor, pressure sensor and controls. RSX technical manual. SCS Delta Motorsport ABSSCS describes this as a universal standalone kit; its FAQ says wheel-speed sensors connect directly to the ABS and speed data is made available to other equipment. Check the kit and installation requirements for the vehicle. SCS Delta product; SCS FAQ.

Standalone traction controllers

SystemIdentification RaceTCS V2 / V3Separate wheel-speed-based traction controllers. The supplier describes intervention through injector or ignition signals; engine and wiring compatibility depend on version. The V2 manual restricts fuel-cut use on direct-injection engines. RaceTCS product and downloads; V2 manual. Racelogic Traction ControlLegacy separate traction-control system with wheel-speed comparison and an adjustable controller; the manufacturer's support library lists it as discontinued. Racelogic legacy support; Traction Control manual.

Traction control within an engine ECU

MoTeC M1 GPR package lists traction and launch control among its race-car functions; GPR is an ECU software package, not an ABS hydraulic kit. MoTeC GPR.Haltech Nexus VCU and Elite ECU: Haltech describes traction control in its guide for Nexus and Elite firmware 2.34 onwards, based on wheel-speed inputs and engine output intervention. Haltech traction-control guide.

Selection and integration

Confirm competition rules and the supplier's intended use; motorsport kits may be restricted to closed-course use. Check hydraulic circuit layout, wheel-speed sensor type and mounting, tyre circumference, motion and pressure sensors, power, CAN rate and messages, engine intervention method, calibration, warnings and fault behaviour for the exact equipment. Observe the maker's commissioning and service intervals and have brake work performed by a qualified specialist.

Manufacturer and individual model pages

Bosch Motorsport ABSSCS Delta ABSRaceTCSRacelogicraceTronicsHondata traction controlContinental RSX motorsport ABS

Further model and wiring referencesDavis Technologies standalone traction controllers: TC-3 and Profiler EFI model pages and model-specific connector tables.MoTeC TCMux: wheel-speed multiplexer for an external compatible ECU, not a standalone traction controller.Continental Bugatti Bolide brake control: a bespoke factory track-car system, not an identified retail RSX kit.Manufacturer-sourced connector tables: RaceTCS V2, RaceTCS V3, Racelogic, SCS Delta Gen 2 and Continental RSX ABS.Aftermarket MK60 race conversionsMaBra MK60 Race ABS and MK-Motorsportteile MK60P are separately supplied, vehicle-configured race conversion systems. See their model pages for documented applications and the limits of available wiring information.Additional motorsport systems and applicationsBosch M4 connector and Bosch M5 connector: manufacturer-sourced, kit-specific wiring references.MK-Motorsportteile MK60R, Epic MK60 harness and Autosport Technology MK60: distinct motorsport integrations.Happy Cactus MK60 Companion: a sensor interface for a separate ABS controller.GRIPONE and Bazzaz: motorcycle traction control systems and documented applications.MoTeC SDC, SDC2 and SDC3: Subaru centre differential slip control, distinct from hydraulic ABS.Further motorsport researchAUMOVIO MK 100 UHP ABS, with its model-specific HECU connector reference.ALBI Engineering, Garage36, RHT Motorsport and Redline Motorsport brake-control integrations and documented examples.Nemesis TCS motorcycle traction control and GRIPONE CHRONO TC, with documented motorcycle applications.MoTeC SDC2 and SDC3 connector references for Subaru differential slip controllers, including documented source discrepancies.Bluegrass MK60E5/E1 to Haltech gateway is an ABS-data interface for supported ECUs; its separate connector reference is specific to that gateway.Additional race kits and applicationsSee the Bosch Motorsport M4 Porsche Cup and M5 Porsche Cup variants, plus the documented M5 race-car applications. The AUMOVIO MK 100 UHP reference now also includes the kit sensor and switch connectors.Motorcycle systems include GRIPONE S3, GRIPONE S4 and HealTech ARA-1; follow the documented kit and vehicle-specific wiring rather than assuming connector interchangeability.Further manufacturer and wiring referencesFord Performance motorsport ABS includes separately identified FR500S, Boss 302R/302S and FP350S competition modules. Bosch M4 and M5 pages list source-backed race-car applications.The Hondata traction module connector layout identifies its wire-side arrangement and harness revisions. Racelogic RLTC-CAN, Davis TMS-9500-SL Short HEI and the RHT MK60 digital wheel-speed interface have separately scoped wiring references. GET LC-GPA is an ECU-dependent motorcycle interface.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Motorsport and standalone ABS and traction control

ABS and traction systems directory · Bosch · ATE / Teves / Continental · Other manufacturers · Motorsport and standalone

Motorsport ABS controls hydraulic brake pressure to manage wheel lock under braking. Traction control limits driven-wheel spin under power, commonly through engine torque intervention. A standalone traction controller or engine ECU feature is not by itself a hydraulic ABS or a complete stability-control system.

Motorsport and standalone ABS

Manufacturer and modelWhat the source identifies
Bosch Motorsport ABS M4 Kit / M4 ClubsportEarlier motorsport kit documented in Bosch's archive. M4 is distinct from M5; Bosch's M5 manual warns that M4 pressure sensors are not compatible with M5. Bosch M4 Clubsport; M5 manual.
Bosch Motorsport ABS M5 Kit 1, Kit 2 and ClubsportBosch specifies front-, rear- and four-wheel-drive use and describes differences between kits, including loom, map selection and optional functions. Four compatible active wheel-speed sensors and the specified pressure and motion sensors are part of the system design. Do not reuse an M4 loom or sensors without checking the M5 manual: Bosch warns of damage from incorrect wiring or sensors. Bosch M5 product and manual.
Continental Engineering Services RSX ABSA motorsport adaptation based on Continental MK 100 with a front/rear brake-circuit split and balance-bar application described in its technical manual. It includes a hydraulic/electronic control unit, motion sensor, pressure sensor and controls. RSX technical manual.
SCS Delta Motorsport ABSSCS describes this as a universal standalone kit; its FAQ says wheel-speed sensors connect directly to the ABS and speed data is made available to other equipment. Check the kit and installation requirements for the vehicle. SCS Delta product; SCS FAQ.

Standalone traction controllers

SystemIdentification
RaceTCS V2 / V3Separate wheel-speed-based traction controllers. The supplier describes intervention through injector or ignition signals; engine and wiring compatibility depend on version. The V2 manual restricts fuel-cut use on direct-injection engines. RaceTCS product and downloads; V2 manual.
Racelogic Traction ControlLegacy separate traction-control system with wheel-speed comparison and an adjustable controller; the manufacturer's support library lists it as discontinued. Racelogic legacy support; Traction Control manual.

Traction control within an engine ECU

  • MoTeC M1 GPR package lists traction and launch control among its race-car functions; GPR is an ECU software package, not an ABS hydraulic kit. MoTeC GPR.
  • Haltech Nexus VCU and Elite ECU: Haltech describes traction control in its guide for Nexus and Elite firmware 2.34 onwards, based on wheel-speed inputs and engine output intervention. Haltech traction-control guide.

Selection and integration

Confirm competition rules and the supplier's intended use; motorsport kits may be restricted to closed-course use. Check hydraulic circuit layout, wheel-speed sensor type and mounting, tyre circumference, motion and pressure sensors, power, CAN rate and messages, engine intervention method, calibration, warnings and fault behaviour for the exact equipment. Observe the maker's commissioning and service intervals and have brake work performed by a qualified specialist.

Manufacturer and individual model pages

Revision 10: Motorsport and standalone ABS and traction control

ABS and traction systems directory · Bosch · ATE / Teves / Continental · Other manufacturers · Motorsport and standalone

Motorsport ABS controls hydraulic brake pressure to manage wheel lock under braking. Traction control limits driven-wheel spin under power, commonly through engine torque intervention. A standalone traction controller or engine ECU feature is not by itself a hydraulic ABS or a complete stability-control system.

A documented motorsport application

Ford Mustang Dark Horse R race car competing at Watkins Glen in 2024

The Ford Mustang Dark Horse R is an example of a race car equipped with motorsport ABS. Ford’s 2024 owner’s manual specifies a Bosch Motorsport M5 Race ABS system with a Dark Horse R-specific calibration; the picture shows the vehicle, not the ABS unit. Ford Performance owner’s manual. Photo of Alex Bachoura’s car by SmackJam, Wikimedia Commons, CC BY-SA 4.0; unmodified.

Motorsport and standalone ABS

Manufacturer and modelWhat the source identifies
Bosch Motorsport ABS M4 Kit / M4 ClubsportEarlier motorsport kit documented in Bosch's archive. M4 is distinct from M5; Bosch's M5 manual warns that M4 pressure sensors are not compatible with M5. Bosch M4 Clubsport; M5 manual.
Bosch Motorsport ABS M5 Kit 1, Kit 2 and ClubsportBosch specifies front-, rear- and four-wheel-drive use and describes differences between kits, including loom, map selection and optional functions. Four compatible active wheel-speed sensors and the specified pressure and motion sensors are part of the system design. Do not reuse an M4 loom or sensors without checking the M5 manual: Bosch warns of damage from incorrect wiring or sensors. Bosch M5 product and manual.
Continental Engineering Services RSX ABSA motorsport adaptation based on Continental MK 100 with a front/rear brake-circuit split and balance-bar application described in its technical manual. It includes a hydraulic/electronic control unit, motion sensor, pressure sensor and controls. RSX technical manual.
SCS Delta Motorsport ABSSCS describes this as a universal standalone kit; its FAQ says wheel-speed sensors connect directly to the ABS and speed data is made available to other equipment. Check the kit and installation requirements for the vehicle. SCS Delta product; SCS FAQ.

Standalone traction controllers

SystemIdentification
RaceTCS V2 / V3Separate wheel-speed-based traction controllers. The supplier describes intervention through injector or ignition signals; engine and wiring compatibility depend on version. The V2 manual restricts fuel-cut use on direct-injection engines. RaceTCS product and downloads; V2 manual.
Racelogic Traction ControlLegacy separate traction-control system with wheel-speed comparison and an adjustable controller; the manufacturer's support library lists it as discontinued. Racelogic legacy support; Traction Control manual.

Traction control within an engine ECU

  • MoTeC M1 GPR package lists traction and launch control among its race-car functions; GPR is an ECU software package, not an ABS hydraulic kit. MoTeC GPR.
  • Haltech Nexus VCU and Elite ECU: Haltech describes traction control in its guide for Nexus and Elite firmware 2.34 onwards, based on wheel-speed inputs and engine output intervention. Haltech traction-control guide.

Selection and integration

Confirm competition rules and the supplier's intended use; motorsport kits may be restricted to closed-course use. Check hydraulic circuit layout, wheel-speed sensor type and mounting, tyre circumference, motion and pressure sensors, power, CAN rate and messages, engine intervention method, calibration, warnings and fault behaviour for the exact equipment. Observe the maker's commissioning and service intervals and have brake work performed by a qualified specialist.

Manufacturer and individual model pages

Further model and wiring references

Aftermarket MK60 race conversions

MaBra MK60 Race ABS and MK-Motorsportteile MK60P are separately supplied, vehicle-configured race conversion systems. See their model pages for documented applications and the limits of available wiring information.

Additional motorsport systems and applications

Further motorsport research

Bluegrass MK60E5/E1 to Haltech gateway is an ABS-data interface for supported ECUs; its separate connector reference is specific to that gateway.

Additional race kits and applications

See the Bosch Motorsport M4 Porsche Cup and M5 Porsche Cup variants, plus the documented M5 race-car applications. The AUMOVIO MK 100 UHP reference now also includes the kit sensor and switch connectors.

Motorcycle systems include GRIPONE S3, GRIPONE S4 and HealTech ARA-1; follow the documented kit and vehicle-specific wiring rather than assuming connector interchangeability.

Further manufacturer and wiring references

Ford Performance motorsport ABS includes separately identified FR500S, Boss 302R/302S and FP350S competition modules. Bosch M4 and M5 pages list source-backed race-car applications.

The Hondata traction module connector layout identifies its wire-side arrangement and harness revisions. Racelogic RLTC-CAN, Davis TMS-9500-SL Short HEI and the RHT MK60 digital wheel-speed interface have separately scoped wiring references. GET LC-GPA is an ECU-dependent motorcycle interface.