Standalone ECUs
Engine control unit manufacturers, families, variants and their technical references.
884 matching pages
-
Link G4X N350X connector pinout
Structured connector pinout of the Link G4X N350X (350ZLink) plug-in ECU for the Nissan 350Z / V35: 121-pin two-connector factory header, 16-position expansion connector and 5-pin CAN 1/RS232 connector, from Link's installation manual.
Applies to: Link G4X N350X plug-in ECU
-
Haltech Elite 1500 connector pinout
Pin assignments, wire colours and electrical notes for the Haltech Elite 1500's 34-pin and 26-pin main connectors, redrawn from Haltech's support pinout articles.
Applies to: Haltech Elite 1500
-
SCS Delta GDI4 connector pinout
Two 35-way AMPSeal connectors (A and B) of the SCS Delta GDI4 direct-injection standalone ECU: all 70 pins with short names, electrical descriptions and applications from the SXTune technical reference.
Applies to: SCS Delta GDI4
-
MBE 941Reference hub
MBE 941 identification, configuration and model wiring references.
-
Holley Avenger EFI connector pinout
Pin assignment of the Holley Avenger EFI ECU connectors J1A (34-pin) and J1B (26-pin) from Appendix 1 of the Avenger installation manual, as a numbered pin index.
Applies to: Holley Avenger EFI
-
MBE 941 connector pinout
Partial structured pinout of the MBE 941: serial, mapping-trim and throttle-sensor positions of the 55-way main connector and the 9-pin mapping connector, from MBE Systems and SBD Motorsport documents; pin index, other positions not documented.
Applies to: MBE 941
-
DTAFast E4Reference hub
Historic DTAFast E4 identification and model-specific wiring references.
-
DTAFast E4 connector pinout
Power (18-contact) and sensor (19-contact) loom connectors of the historic DTAFast E4, with every contact listed from the 1997 DTAFast wiring schematics; redrawn, contact positions as on the schematic symbols.
Applies to: DTAFast E4
-
MaxxECU Audi A4 (AEB) plug-in adapterReference hub
Application identification, connector and wiring reference for the MaxxECU Audi A4 (AEB) GEN1 plug-in adapter.
-
Link G4+ MonsoonReference hub
Link G4+ Monsoon identification, features, software and exact-model wiring guide.
-
MoTeC M880MReference hub
MoTeC M880M ECU identity, hardware, software and model-specific wiring sources.
-
Motorsport Electronics ME442 Mazda MX-5 Mk1 1989–1995 plug-inReference hub
ME442 Mazda MX-5 Mk1 1989-1995 application-specific plug-in ECU and manufacturer wiring guide.
-
GEMS EM36Reference hub
GEMS EM36 ECU identification, technical details and model-specific wiring references.
-
MaxxECU Audi A4 AEB adapter connector pinout
Extra connectors of the MaxxECU Audi A4 (AEB) GEN1 plug-in adapter: 16-pin extra connector, 6-pin LSU 4.2 sensor connector and 3-pin analogue input connector (25 pins).
Applies to: MaxxECU Audi A4 (AEB) plug-in adapter
-
Link G4+ Monsoon connector pinout
Function and loom colour of all 34 pins on the A loom header of the Link G4+ Monsoon, from Link's quick start guide.
Applies to: Link G4+ Monsoon
-
Haltech Elite 1000Reference hub
Haltech Elite 1000: identification, model features and documented wiring.
-
Motorsport Electronics ME221 Mazda MX-5 Mk1 1989–1995 plug-inReference hub
ME221 Mazda MX-5 Mk1 1989-1995 application-specific plug-in ECU and manufacturer wiring guide.
-
SCS Delta 900 connector pinout
Three 35-way AMPSeal connectors (A, B and C) of the SCS Delta 900 standalone ECU: all 105 pins with names, electrical descriptions and typical applications from the SXTune technical reference.
Applies to: SCS Delta 900
-
Link G4X N300X plug-in ECUReference hub
Link N300X G4X plug-in ECU for Nissan Z32 300ZX, with installation and pinout reference.
-
MoTeC M880Reference hub
MoTeC M880 ECU identity, hardware, software and model-specific wiring sources.
-
Emtron KV16Reference hub
Emtron KV16 identification, specifications and model-specific connector pinout.
-
MBE 912Reference hub
Historic MBE 912 identification, 912-C connector assignments and SBD 912/956 harness interface.
-
Motorsport Electronics ME221 and ME442 Mazda MX-5 1989-1995 plug-in connector pinout
Two-plug factory header (48 cavities) and 20-way auxiliary connector of the Motorsport Electronics ME221/ME442 Mazda MX-5 (NA) 1989-1995 plug-in ECU, redrawn from the manufacturer installation guide.
Applies to: Motorsport Electronics ME221 Mazda MX-5 Mk1 1989–1995 plug-inMotorsport Electronics ME442 Mazda MX-5 Mk1 1989–1995 plug-in
-
MoTeC M800MReference hub
MoTeC M800M ECU identity, hardware, software and model-specific wiring sources.
-
Haltech Platinum Sprint REReference hub
Haltech Platinum Sprint RE: identification, model features and documented wiring.
-
MBE 912 connector pinout
Structured pinout of the MBE 912-C main ECU connector (15 positions) and the four-way Sure Seal harness interface used with the 912/956 series, from SBD Motorsport documentation; redrawn diagram.
Applies to: MBE 912
-
Haltech Elite 1000 connector pinout
Pin assignments, wire colours and electrical notes for the Haltech Elite 1000's 34-pin and 26-pin main connectors, redrawn from Haltech's support pinout articles.
Applies to: Haltech Elite 1000
-
Link G4X N300X connector pinout
Structured connector pinout of the Link G4X N300X (300ZLink) plug-in ECU for the Nissan Z32 300ZX: 76-pin factory header, 16-position expansion connector and two 5-pin CAN connectors, from Link's installation manual (PCB V1.1).
Applies to: Link G4X N300X plug-in ECU
-
Link G4+ KurofuneReference hub
G4+ Kurofune identification, legacy support and documented wiring limitations.
-
Emtron KV16 connector pinout
Emtron KV16 hardware revision 2: four Superseal connectors (A 26, B 34, C 34, D 26 = 120 pins) drawn looking into the ECU, with every channel name from Emtron's Rev2 pinout.
Applies to: Emtron KV16
-
Link G5 Voodoo ProReference hub
Link G5 Voodoo Pro identification, features, software and exact-model wiring guide.
-
Haltech Platinum Sprint 500 connector pinout
Pin assignment of the single 32-pin connector of the Haltech Platinum Sprint 500 and Sprint RE, redrawn from the identical ECU connection tables in Haltech's quick start guides.
Applies to: Haltech Platinum Sprint 500Haltech Platinum Sprint RE
-
GEMS EM36 connector pinout
Pin index for the GEMS EM36 36-way loom connector and 9-way communications socket, redrawn from the 2008 GEMS EM36 operation manual (third-party-hosted copy).
Applies to: GEMS EM36
-
MoTeC M800Reference hub
MoTeC M800 ECU identity, hardware, software and model-specific wiring sources.
-
Link G4+ Kurofune connector pinout
Function of all 72 pins of the Link G4+ Kurofune: connectors A, B and C (pins 1-64) and the 8-way XS connector, from Link's quick start guide.
Applies to: Link G4+ Kurofune
-
Link G5 Voodoo Pro V2Reference hub
Voodoo Pro V2 revision identification, connector wiring and manufacturer guide.
-
Link G5 Voodoo Pro V1Reference hub
Voodoo Pro V1 revision identification, connector wiring and manufacturer guide.
-
SCS Delta 880 connector pinout
Main and secondary 35-way AMPSeal connectors of the SCS Delta 880 standalone ECU: all 70 pins, including its gearshift and paddle assignments, from the SXTune technical reference.
Applies to: SCS Delta 880
-
MoTeC M600MReference hub
MoTeC M600M ECU identity, hardware, software and model-specific wiring sources.
-
Link G5 Voodoo Pro V1 connector pinout
Pin assignments of the original Link G5 Voodoo Pro (V1) wire-in ECU: headers A and B (34-way) and E (26-way), 94 cavities, with function and loom colour per pin.
Applies to: Link G5 Voodoo Pro V1
-
MaxxECU Toyota Supra MKIV (2JZ) plug-in adapterReference hub
Application identification, connector and wiring reference for the MaxxECU Toyota Supra MKIV (2JZ) GEN1 plug-in adapter.
-
Cosworth SQ7DiReference hub
Cosworth SQ7Di ECU identification, capabilities and technical references.
-
Haltech Platinum Sprint 500Reference hub
Haltech Platinum Sprint 500: identification, model features and documented wiring.
-
MaxxECU Toyota Supra MKIV (2JZ) plug-in adapter connector pinout
Pinout of the 16-pin extra connector, the 6-pin LSU 4.2 wideband sensor connector and the 3-pin analogue input connector on the MaxxECU GEN1 plug-in adapter for the Toyota Supra MKIV 2JZ, from the manufacturer's guide; redrawn diagram.
Applies to: MaxxECU Toyota Supra MKIV (2JZ) plug-in adapter
-
MoTeC M600Reference hub
MoTeC M600 ECU identity, hardware, software and model-specific wiring sources.
-
Link G4X MX5X plug-in ECUReference hub
Link MX5X G4X plug-in ECU for Mazda MX-5, with installation and pinout reference.
-
GEMS EM112Reference hub
GEMS EM112 ECU identification, technical details and model-specific wiring references.
-
Cosworth SQ7Di connector pinout
121-way Tyco 1241434-3 connector of the Cosworth Pectel SQ7Di direct-injection ECU, every pin with manufacturer function and recommended wire size; redrawn from Cosworth product information 29E-071702-1bE.
Applies to: Cosworth SQ7Di
-
Emtron KV12Reference hub
Emtron KV12 identification, specifications and model-specific connector pinout.
-
MoTeC M400Reference hub
MoTeC M400 ECU identity, hardware, software and model-specific wiring sources.
-
Link G4+ FuryReference hub
Link G4+ Fury identification, features, software and exact-model wiring guide.
-
Link G4X MX5X connector pinout
Structured connector pinout of the Link G4X MX5X (MX5Link) plug-in ECU for the Mazda MX-5 NA: 48-pin factory header with Mazda cavity designations, 16-position expansion connector and two 5-pin CAN connectors, from Link's installation manual.
Applies to: Link G4X MX5X plug-in ECU
-
Haltech E8Reference hub
Haltech E8: identification, model features and documented wiring.
-
SCS Delta 800 connector pinout
Two 35-way AMPSeal connectors (A and B) of the SCS Delta 800 standalone ECU: all 70 pins with names, electrical descriptions and typical applications from the SXTune technical reference.
Applies to: SCS Delta 800
-
GEMS EM112 connector pinout
Pin index for the GEMS EM112 112-way Molex CMC header (bays A, B and C), redrawn from GEMS technical specification 103715 rev 11.
Applies to: GEMS EM112
-
Motorsport Electronics ME442 Honda S2000 AP1 plug-inReference hub
ME442 Honda S2000 AP1 application-specific plug-in ECU and manufacturer wiring guide.
-
Link G5 Voodoo Pro V2 connector pinout
Pin assignments of the Link G5 Voodoo Pro V2 wire-in ECU: headers A and B (34-way) and E (26-way), 94 cavities, with function and loom colour per pin.
Applies to: Link G5 Voodoo Pro V2
-
Link G4+ Fury connector pinout
Function and loom colour of all 68 pins on the A and B 34-way looms of the Link G4+ Fury, from Link's quick start guide.
Applies to: Link G4+ Fury
-
MaxxECU PROReference hub
Identification, specifications, wiring and model-specific pinout resources for the MaxxECU PRO standalone ECU.
-
Emtron KV12 connector pinout
Emtron KV12 hardware revision 2: four Superseal connectors (A 26, B 34, C 34, D 26 = 120 pins) drawn looking into the ECU, with every channel name from Emtron's Rev2 pinout.
Applies to: Emtron KV12
-
MoTeC M400MReference hub
MoTeC M400M ECU identity, hardware, software and model-specific wiring sources.
-
Motorsport Electronics ME221 Honda S2000 AP1 plug-inReference hub
ME221 Honda S2000 AP1 application-specific plug-in ECU and manufacturer wiring guide.
-
Haltech E8 connector pinout
Pin assignments and connector faces of the Haltech E8's 34-pin and 26-pin ECU connectors, redrawn from Haltech's E8 main harness wiring diagram (rev A, 2008).
Applies to: Haltech E8
-
MoTeC M400, M600, M800 and M880 connector pinout
Structured pinout of the obsolete MoTeC M400, M600 and M800 (connectors A and B) and M880 (66-way Autosport) Gold Box ECUs, with marine variants, from Appendix L of the MoTeC manual.
Applies to: MoTeC M400MoTeC M400MMoTeC M600MoTeC M600MMoTeC M800MoTeC M800MMoTeC M880MoTeC M880M
-
MaxxECU RACE H2OReference hub
Identification, specifications, wiring and model-specific pinout resources for the MaxxECU RACE H2O standalone ECU.
-
Motorsport Electronics ME221 and ME442 Honda S2000 AP1 plug-in connector pinout
Factory A/B/C/D header (104 cavities) of the Motorsport Electronics ME221/ME442 Honda S2000 AP1 plug-in ECU with GEN1 and GEN2/2B channel mapping, redrawn from the manufacturer manual.
Applies to: Motorsport Electronics ME221 Honda S2000 AP1 plug-inMotorsport Electronics ME442 Honda S2000 AP1 plug-in
-
Haltech Platinum Sport 2000Reference hub
Haltech Platinum Sport 2000: identification, model features and documented wiring.
-
Link G4X MX5X NB2 plug-in ECUReference hub
Link MX5X NB2 G4X plug-in ECU for Mazda MX-5 NB2, with installation and pinout reference.
-
MaxxECU RACEReference hub
Identification, specifications, wiring and model-specific pinout resources for the MaxxECU RACE standalone ECU.
-
SCS Delta 700 connector pinout
Two 35-way AMPSeal connectors (A and B) of the SCS Delta 700 standalone ECU: all 70 pins with names, electrical descriptions and typical applications from the SXTune technical reference.
Applies to: SCS Delta 700
-
Haltech Platinum Sport 1000Reference hub
Haltech Platinum Sport 1000: identification, model features and documented wiring.
-
MaxxECU MINIReference hub
Identification, specifications, wiring and model-specific pinout resources for the MaxxECU MINI standalone ECU.
-
Link G4X MX5X NB2 connector pinout
Structured connector pinout of the Link G4X MX5X NB2 plug-in ECU for the Mazda MX-5 NB2: 72-pin factory header (31P, 24P and 17P blocks) with Mazda cavity designations, expansion, e-throttle and CAN connectors, from Link's installation manual.
Applies to: Link G4X MX5X NB2 plug-in ECU
-
Link G4+ Force GDIReference hub
Link G4+ Force GDI identification, features, software and exact-model wiring guide.
-
MaxxECU SPORTReference hub
Identification, specifications, wiring and model-specific pinout resources for the MaxxECU SPORT standalone ECU.
-
FuelTech FT700PLUSReference hub
FuelTech FT700PLUS identification, features, software and wiring references.
-
FuelTech FT700Reference hub
FuelTech FT700 identification, features, software and wiring references.
-
Haltech Platinum Sport 1000 and 2000 connector pinout
Pin allocation of the Haltech Platinum Sport 1000 and 2000: 34-pin and 26-pin connectors, redrawn from Haltech's pin allocation guide, with the positions not available on the Sport 1000 marked.
Applies to: Haltech Platinum Sport 1000Haltech Platinum Sport 2000
-
MaxxECU STREETReference hub
Identification, specifications, wiring and model-specific pinout resources for the MaxxECU STREET standalone ECU.
-
Link G4+ Force GDI connector pinout
Function and loom colour of all 68 pins on the A and B 34-way looms of the Link G4+ Force GDI, from Link's quick start guide.
Applies to: Link G4+ Force GDI
-
SCS Delta 400Reference hub
SCS Delta 400 identification, connector assignments, model-specific pinout and calibration resources.
-
Link G5 Voodoo Neo 6Reference hub
Link G5 Voodoo Neo 6 identification, features, software and exact-model wiring guide.
-
Cosworth SQ6M12Reference hub
Cosworth SQ6M12 ECU identification, capabilities and technical references.
-
Emerald standalone ECUsReference hub
Emerald K6+, K6, K3, M3DK and M3D history with a K3 main-connector pin reference.
-
MaxxECU V1Reference hub
Identification, specifications, wiring and model-specific pinout resources for the MaxxECU V1 standalone ECU.
-
SCS Delta 400 connector pinout
35-way AMPSeal 776164-1 connector of the SCS Delta 400 standalone ECU: all 35 pins with names, electrical descriptions and typical applications from the SXTune technical reference.
Applies to: SCS Delta 400
-
Haltech E6XReference hub
Haltech E6X: identification, model features and documented wiring.
-
Link G5 Voodoo Neo 6 connector pinout
Pin assignments of the Link G5 Voodoo Neo 6 wire-in ECU: headers A and B, 34 cavities each, with every cavity's function.
Applies to: Link G5 Voodoo Neo 6
-
Cosworth SQ6M12 connector pinout
Pin assignments of the three Deutsch Autosport connectors (AS216-26PN, AS216-35PN, AS216-26PA; 107 contacts) of the Cosworth Pectel SQ6M12, from Cosworth product information 29E-071588-3E; pin-index drawings.
Applies to: Cosworth SQ6M12
-
MoTeC M4Reference hub
MoTeC M4 ECU identity, hardware, software and model-specific wiring sources.
-
FuelTech FT700 and FT700Plus connector pinout
Pin assignments of the FuelTech FT700 and FT700Plus harness connectors: 34-way A and B, optional 26-way C and D and optional 14-way M, redrawn from FuelTech's quick install guide.
Applies to: FuelTech FT700FuelTech FT700PLUS
-
Emerald M3DKReference hub
Emerald M3DK: model identification, generation and documented wiring.
-
Link G4X MX5X NB1 plug-in ECUReference hub
Link MX5X NB1 G4X plug-in ECU for Mazda MX-5 NB1, with installation and pinout reference.
-
Motorsport Electronics ME442Reference hub
ME442 GEN1 revision C/D and GEN2 fuel-and-ignition ECU pinouts and identification.
-
MoTeC M4 connector pinout
Structured pinout of the obsolete MoTeC M4 Gold Box ECU (part 11001) 36-way connector, from the M4 wiring drawing in the MoTeC M4/M48/M8 manual.
Applies to: MoTeC M4
-
Emerald M3DK connector pinout
Emerald M3DK 36-way ECU connector, rear-view face and all 36 pin functions from the manufacturer M3DK manual v5.
Applies to: Emerald M3DK
-
MaxxECU GEN1 connector pinout
Pin index of the MaxxECU GEN1 standalone ECU connectors: the 48-pin connector 1 shared by STREET, SPORT, V1, RACE and PRO, the MINI 32-pin connector, RACE connector 2 and PRO connectors 2 to 4 (224 positions), from the manufacturer's GEN1 pinout.
Applies to: MaxxECU MINIMaxxECU PROMaxxECU RACEMaxxECU RACE H2OMaxxECU SPORTMaxxECU STREETMaxxECU V1
-
Haltech E6X connector pinout
Pin assignments of the 36-pin ECU connector of the Haltech E6X, redrawn from Haltech's E6X main harness wiring diagram (rev A, 2008).
Applies to: Haltech E6X
-
Link G4+ Atom IIReference hub
G4+ Atom II identification, legacy support and documented wiring limitations.
-
Haltech Nexus T2Reference hub
Nexus T2 identification, output counts, wiring and software references.