Header and bays
The GEMS EM112 uses a 112-way Molex CMC header (64333-0100) divided into three keyed bays. Bay A is a 32-way black bay (mating plug Molex 64319-3211), bay B a 48-way brown bay (64320-1319) and bay C a 32-way grey bay (64319-1218). GEMS technical specification 103715 rev 11 (manufacturer documentation) names each cavity by column letter and row: A to H and rows 1 to 4 for bays A and C, and A to M without I and rows 1 to 4 for bay B. The diagram here is a pin index in that letter-and-row order. The CMC header's actual cavity sizes and spacing are not reproduced; GEMS draws the bays as C, B and A from left to right.
Assignments
Bays A and C carry most of the engine I/O:
- the eight ignition coil drivers and eight injector drivers;
- the two wideband lambda channels (A on bay C, B on bay A) with their heaters;
- the knock inputs, the active-throttle feedback inputs and bridge drivers A and B;
- main 12 V (C-G2), power returns, and the MAP, MAF, coolant and air temperature inputs.
Bay B carries:
- Ethernet (A1–D1) and the three CAN buses (E1–K1);
- timing inputs 5 to 12, the differential analogue inputs, the accelerator pedal and lambda inputs, and further analogue inputs;
- bridge drivers C and D and PWM low-side drivers 9 to 12;
- the main relay output (M2), main 12 V (M4) and secondary 12 V (L2).
The rev 11 specification is internally inconsistent in places. It labels both A-H1 and C-H1 as ignition coil driver 4, and repeats some software output codes. These entries are reproduced as printed and are not resolved here. A drawing confirmed by GEMS for the specific build should be used before wiring ignition outputs.
Sources
- GEMS EM112 Technical Specification, document 103715 rev 11, dated 12 May 2016, manufacturer documentation; connectors and pin-out tables, pages 2–4. Accessed 19 November 2026.
Connector pinout
GEMS EM112, Molex CMC 112-way header (bay A 32-way black, bay B 48-way brown, bay C 32-way grey; mating plugs Molex 64319-3211, 64320-1319 and 64319-1218), from GEMS technical specification 103715 rev 11 (manufacturer documentation). The diagram is a pin index by column letter and row; the true cavity sizes and spacing of the CMC header are not reproduced. The source labels both A-H1 and C-H1 as ignition coil driver 4 and repeats some software codes; these are reproduced as printed and are unresolved.
View orientation is stated beside each photograph. Unknown functions remain in the pin index.
Bay A, 32-way black (Molex 64319-3211)
View: Pin index by letter and row; not a scaled face view
Select a pin in a photograph or the index to highlight it.
| Pin | Function / cavity | Confidence / source | Notes |
|---|---|---|---|
| Wideband lambda B 4 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Wideband lambda B 3 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Wideband lambda B heater Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| PWM low-side driver 7 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| PWM low-side driver 8 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Fuel injector driver 5 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Bridge driver A− Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Ignition coil driver 4 (O4) Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
Rev 11 labels both A-H1 and C-H1 as ignition coil driver 4; unresolved in the source. | |
| Wideband lambda B 2 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Wideband lambda B 1 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| LIN bus Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| MAP input Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Timing input 2 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Fuel injector driver 6 (O26) Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Bridge driver A+ Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Ignition coil driver 3 (O3) Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Knock input B+ Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Knock input B− Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Timing input 1 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue ground 4 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| 5 V sensor supply 3 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Fuel injector driver 7 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue input 20 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Ignition coil driver 5 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Active throttle feedback 2 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Active throttle feedback 1 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue ground 2 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Coolant temperature input Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Air inlet temperature input Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Fuel injector driver 8 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Power return Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Ignition coil driver 6 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
Bay B, 48-way brown (Molex 64320-1319)
View: Pin index by letter and row; not a scaled face view
Select a pin in a photograph or the index to highlight it.
| Pin | Function / cavity | Confidence / source | Notes |
|---|---|---|---|
| Ethernet TX+ Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Ethernet TX− Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Ethernet RX+ Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Ethernet RX− Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| CAN 2 high Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| CAN 2 low Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| CAN 1 high Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| CAN 1 low Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| CAN 3 high Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| CAN 3 low Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| PWM low-side driver 10 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| PWM low-side driver 9 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| 5 V sensor supply 2 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Timing input 12 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Timing input 11 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Timing input 10 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Timing input 9 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue ground 5 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Timing input 5 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Timing input 6 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| 5 V sensor supply 4 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue ground 6 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Secondary 12 V supply Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Main relay Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Differential analogue input B− Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Differential analogue input B+ Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Accelerator pedal input 1 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Accelerator pedal input 2 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Lambda input 1 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Lambda input 2 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue input 27 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue input 26 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue input 25 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue input 24 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| PWM low-side driver 12 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| PWM low-side driver 11 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Differential analogue input A− Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Differential analogue input A+ Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Bridge driver C+ Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Bridge driver C− Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Bridge driver D+ Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Bridge driver D− Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Timing input 7 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Timing input 8 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue input 16 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue input 31 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Power return Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Main 12 V supply Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
Bay C, 32-way grey (Molex 64319-1218)
View: Pin index by letter and row; not a scaled face view
Select a pin in a photograph or the index to highlight it.
| Pin | Function / cavity | Confidence / source | Notes |
|---|---|---|---|
| Wideband lambda A 3 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Wideband lambda A 4 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Wideband lambda A heater Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| PWM low-side driver 3 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| PWM low-side driver 4 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Fuel injector driver 4 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Power return Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Ignition coil driver 4 (O2) Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
Rev 11 labels both A-H1 and C-H1 as ignition coil driver 4; unresolved in the source. | |
| Wideband lambda A 1 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Wideband lambda A 2 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue input 23 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| MAF input Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Timing input 4 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Fuel injector driver 3 (O26) Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Main 12 V supply Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Ignition coil driver 2 (O2) Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Knock input A− Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Knock input A+ Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Timing input 3 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue ground 3 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| 5 V sensor supply 1 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Fuel injector driver 2 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Bridge driver B+ Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Ignition coil driver 3 (O1) Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Active throttle feedback 4 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Active throttle feedback 3 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue ground 1 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue input 17 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Analogue input 15 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Fuel injector driver 1 Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Bridge driver B− Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |
||
| Ignition coil driver 1 (O1) Cavity: Populated |
Confirmed GEMS EM112 spec 103715 rev 11 |