Tuning Wiki
Applies to

Check the hardware and software limits stated in this article.

The SCS Delta 800 standalone ECU from Specialist Control Systems has two 35-way AMPSeal connectors: connector A (776164-1) and connector B (776163-4). Each has rows of 12, 11 and 12 cavities. The manufacturer's SXTune technical reference assigns all 70 pins. It also lists a DB9 or DTM PC communications connector, which is not drawn here.

Connector A

Connector A follows the same pattern as the Delta 400. A1 is the direct battery supply (15 A fuse), A2 the ignition key input (10 A fuse), and A3 and A35 the power grounds. Injectors 1 to 4 are at A4 to A7, with A23 and A29 as auxiliary outputs or injectors 5 and 6. Ignition 1 to 4 are at A13 to A16. The crank (A9) and cam 1 and 2 inputs (A10, A18) are VR or Hall, with a sensor ground at A8. A24 to A28 are the main relay or PWM 1, the fuel pump relay or PWM 2, PWM 3 and 4, and the tachometer output. The remaining cavities carry coolant, air and NTC temperature inputs, TPS and MAP inputs, a lambda input, CAN 1 (A21, A22; 120 Ω terminated) and the 5 V reference (500 mA).

Connector B

Connector B carries two electronic-throttle H-bridges (B1 to B4, 5 A each) and four bipolar high- or low-side PWM outputs (B5 to B8). It also has injectors 7 and 8 (B9, B10), ignition 5 to 8 (B13 to B16), and VR or Hall cam inputs 3 and 4 (B11, B12). Four Hall wheel-speed inputs (B17 to B20) and two knock inputs with their ground (B21 to B23) are here too. The remaining cavities are a second lambda input, TPS 2, pedal position 1 and 2, two NTC inputs, four linear inputs and CAN 2 (B34 low, B35 high).

Configurable inputs and outputs depend on the calibration. The faces are drawn in the 35-position AMPSeal arrangement as the manufacturer draws this connector family; the viewing side is not verified.

Diagram redrawn by Tuning Wiki from the SXTune Delta 800 technical reference.

Sources

Connector pinout

Applicability

SCS Delta 800 standalone ECU, two 35-way connectors: A (AMPSeal 776164-1) and B (AMPSeal 776163-4), from the manufacturer's SXTune Delta 800 ECU technical reference (manufacturer documentation, page updated 7 October 2026). The PC communications DB9 and DTM connectors listed in the reference are not included. Functions give the reference's pin name and typical application; configurable inputs and outputs depend on calibration. Cavity positions follow the 35-position AMPSeal arrangement (rows of 12, 11 and 12) as the manufacturer draws this connector family; the viewing side is not verified.

View orientation is stated beside each photograph. Unknown functions remain in the pin index.

Connector A (35-way AMPSeal)

Connector reference: AMPSeal 776164-1

Redrawn connector face
View: 35-position AMPSeal arrangement as drawn for this connector family; viewing side not verified
Connector A (35-way AMPSeal) — Redrawn connector face. 35-position AMPSeal arrangement as drawn for this connector family; viewing side not verified

Select a pin in a photograph or the index to highlight it.

Connector A (35-way AMPSeal) — complete pin index
PinFunction / cavityConfidence / sourceNotes
Battery: Direct Battery Power 6-15V
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Direct Battery Supply (15A fuse).
Ignition: Ignition Key Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Ignition Switched Supply (10A fuse).
Power Ground 1
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Power Ground.
Low Side Output 1: Injector 1 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Open Collector.
Low Side Output 2: Injector 2 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Open Collector.
Low Side Output 3: Injector 3 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Open Collector.
Low Side Output 4: Injector 4 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Open Collector.
Crank/Cam Ground: Crank/Cam Sensor Ground
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Digital Ground.
Crank Input: Crank Sensor Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

VR/Hall - Software Selectable.
Cam Input 1: Cam Sensor 1 Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

VR/Hall - Software Selectable.
NTC Input 1: Coolant Temperature Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3.16K pull-up to VREF.
NTC Input 2: Air Temperature Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3.16K pull-up to VREF.
Ignition 1: Software Configurable Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

TTL/Power Ignition Output.
Ignition 2: Software Configurable Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

TTL/Power Ignition Output.
Ignition 3: Software Configurable Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

TTL/Power Ignition Output.
Ignition 4: Software Configurable Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

TTL/Power Ignition Output.
Analog Input 1: Linear 1 Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

47k pull-up to VREF.
Cam Input 2: Cam Sensor 2 Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

VR/Hall - Software Selectable.
Analog Ground 1: Analog Ground
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Analog Ground.
Lambda 1 Input: Lambda Sensor 2 Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Weak bias to 450mV.
CAN 1H: To PC comms DB9
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

120 Ohm Terminated.
CAN 1L: To PC comms DB9
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Low Side Output 5: Auxiliary 1 / Injector 5 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Open Collector.
Low Side Output 7: Main Relay/PWM1
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Open Collector w/ recirc diode.
Low Side Output 8: Fuel Pump Relay/PWM2
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Open Collector w/ recirc diode.
Low Side Output 9: PWM3 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Open Collector w/ recirc diode.
Low Side Output 10: PWM4 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Open Collector w/ recirc diode.
Low Side Output 11: Tachometer Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Open Collector with pull-up to VBATT via diode.
Low Side Output 6: Auxiliary 2 / Injector 6 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Open Collector.
Analog Ground 2: Analog Sensors Ground
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Analog Ground.
NTC Input 3: NTC1 Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3.16K pull-up to VREF.
Analog Input 2: Throttle Position Sensor Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

47k pull-up to VREF.
Analog Input 3: Manifold Pressure Sensor Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

47k pull-up to VREF.
VREF: 5V Reference Sensor Supply
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

500mA 5V supply to sensors.
Power Ground 2
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Power Ground.

Connector B (35-way AMPSeal)

Connector reference: AMPSeal 776163-4

Redrawn connector face
View: 35-position AMPSeal arrangement as drawn for this connector family; viewing side not verified
Connector B (35-way AMPSeal) — Redrawn connector face. 35-position AMPSeal arrangement as drawn for this connector family; viewing side not verified

Select a pin in a photograph or the index to highlight it.

Connector B (35-way AMPSeal) — complete pin index
PinFunction / cavityConfidence / sourceNotes
H Bridge 1 M+: Throttle Motor 1 +
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

5A H-Bridge.
H Bridge 1 M-: Throttle Motor 1 -
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

5A H-Bridge.
H Bridge 2 M+: Throttle Motor 2 +
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

5A H-Bridge.
H Bridge 2 M-: Throttle Motor 2 -
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

5A H-Bridge.
Bipolar Output 1: PWM5 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Hi Side/Lo Side Drive.
Bipolar Output 2: PWM6 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Hi Side/Lo Side Drive.
Bipolar Output 3: PWM7 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Hi Side/Lo Side Drive.
Bipolar Output 4: PWM8 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Hi Side/Lo Side Drive.
Low Side Output 12: Injector 7 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Open Collector.
Low Side Output 13: Injector 8 Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3A Open Collector.
Cam Input 3: Cam Sensor 3 Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

VR/Hall - Software Selectable.
Cam Input 4: Cam Sensor 4 Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

VR/Hall - Software Selectable.
Ignition 5: Software Configurable Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

TTL/Power.
Ignition 6: Software Configurable Output
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

TTL/Power.
Ignition 7: Short circuit protection for Power
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

TTL/Power.
Ignition 8: Short circuit protection for Power
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

TTL/Power.
Hall Input 1: Wheel Speed LR
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Hall Effect Input.
Hall Input 2: Wheel Speed RR
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Hall Effect Input.
Hall Input 3: Wheel Speed LF
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Hall Effect Input.
Hall Input 4: Wheel Speed RF
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Hall Effect Input.
Knock 1 +
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Knock 1 Signal Input.
Knock 2 +
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Knock 2 Signal Input.
Knock Ground
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Digital Ground.
Lambda 2 Input: Lambda 2
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

Weak bias to 450mV.
Analog Input 4: TPS2
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

47k pull-up to VREF.
Analog Input 5: PPS1
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

47k pull-up to VREF.
Analog Input 6: PPS2
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

47k pull-up to VREF.
NTC Input 4: NTC2 Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3.16k pull-up to VREF.
NTC Input 5: NTC3 Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

3.16k pull-up to VREF.
Analog Input 7: Linear 5 Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

47k pull-up to VREF.
Analog Input 8: Linear 6 Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

47k pull-up to VREF.
Analog Input 9: Linear 7 Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

47k pull-up to VREF.
Analog Input 10: Linear 8 Input
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

47k pull-up to VREF.
CAN 2L: CAN 2 Low
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out

120 Ohm Terminated.
CAN 2H: CAN 2 High
Cavity: Populated
Confirmed

SXTune Delta 800 ECU technical reference, connector pin-out