This section is the peripheral silicon in an engine or transmission controller, and the external memory that sits beside it. The Bosch catalogue of supply, driver and interface devices, including the B-number markings, stays on Bosch ECU integrated circuits. External memory is split into two further sections so the catalogues can be searched on their own.
EPROMs are the ultraviolet and one-time-programmable devices, principally the JEDEC 27C families from the 2732 through the word-wide M27C322. The density and package table is JEDEC EPROM densities and packages. Controllers that a tool maker has named against a particular outline are on EPROMs named on engine controllers.
Flash chips are the external NOR devices that replaced that socket. Five-volt Am29F and M29F covers the boot-block parts reported on ME7 and EDC15. Burst flash covers the M58BW, Am29BL, Am29BDD and S29CD devices on the MPC5xx boards. Three-volt and serial NOR covers S29GL-N, the Am29LV and M29W generation, and Winbond's automotive SPI families. EPROM-pinout flash is the SST27SF, SST39SF and 29F040 group that uses the older socket.
Memory inside the microcontroller is not repeated here. The families are on ECU microcontrollers. The automotive serial EEPROM section covers I²C, Microwire and SPI devices in engine ECUs and instrument clusters, including examples and identification limits.