Applicability: Engineering identifiers below are examples from the community SC8S5031_C_OEM Simos 18.1 cross-reference unless a product or different software is named. Definitions are research leads, not universal calibration values: match the ECU hardware, ASW, A2L, indexing, units, axes, scaling, signs and actual configuration. The community extraction can contain mismatched descriptions or indices. SC8S5031 reference.
Detection and response are different
Knock-sensor signals are filtered and assessed within operating windows; the strategy can then apply rapid per-cylinder retard and learned corrections. A low or absent logged correction does not prove no knock: the detection state, signal availability, mechanical noise, sample rate and logger scaling all matter. Examine each cylinder and final timing alongside fuel, load, temperatures and lambda. COBB documents Knock Dataset Selection (filter selection can vary with injection mode), Knock Window State, individual Knock Retard Cylinder 1 through 4, and an average for supported MQB applications. These are logger display names, not calibration maps or a guarantee of availability. COBB monitor descriptions.
Measurement and detection examples
The SC8S5031 KNCK detection cross-reference lists the following calibrations:
ip_knkwb[3]andip_knkwd[3]: start and duration of an individual cylinder's knock measurement window; example axes are speed and cylinder air mass, with crank-angle outputs. An index must be matched to the software and firing-order/cylinder mapping.ip_knks_thd_fac_1[3]: one knock-detection threshold factor, selected when the documented filter/gain index is 1. The displayed axes are speed and predicted cylinder air mass. It is one factor in threshold calculation, not a direct universal knock limit.ip_knkwb_pre_h_rng[3]andip_knkwd_pre[3]: examples associated with the pre-window, distinct from the main window.lv_knk_win_ovlpandnl_ref[3]are runtime window and noise-reference measurements, not tables.
Window, filter, gain and threshold calibration determine what the ECU can detect; changing them to hide correction can compromise detection. An independent Mk7 noise-and-knock investigation illustrates how noise and detection thresholds affect logged correction; its vehicle test is not a universal calibration. Validate any detection recalibration with suitable cylinder-pressure and acoustic measurements rather than inferring it from a clean-looking log.
For the same SC8S5031 image, id_knks_fil_frq[3][2][0], id_knks_fac_fil[3][2][0] and id_knks_fil_qly[3][2][0] describe per-cylinder, per-filter frequency selection, weighting and quality-factor maps. Their displayed axes are engine speed and maf_h_rng_knk in mg/stroke. The frequency map stores a coded selection, not directly a frequency in hertz; the acquisition reference describes a separate filter-table selector lc_knks_fil_tab. Confirm decoding, configuration and array indexing in the target software. KNCK detection; combustion-noise acquisition.
c_cycnr_knk_det defines a number of combustion cycles for which the noise calculation is frozen after a detected knock in this reference; lv_knk_win_ovlp indicates that the pre-window was shifted to avoid main-window overlap. These represent different parts of the measurement strategy, not a direct measurement of knock intensity or a permission to disregard detection. Verify enable and failure states before drawing conclusions from logged corrections. KNCK detection reference.
Knock response and learning examples
In the KNCK control reference, ip_iga_dec_knk describes spark retard at recognised knock, and ip_iga_max_knk the maximum retard correction; the displayed examples use speed and cylinder air mass. ip_fac_iga_dec_knk is a knock-response factor against knock energy and engine speed. They are response/protection calibrations, not recommended reduced settings.
ip_iga_inc_knk appears with an XDF label suggesting decay, while its extracted A2L description describes an increase in integrated correction when knock is detected. Treat its exact behaviour as unresolved until the target's definition and implementation are checked; do not infer a universal recovery rate from its name.
iga_cyl_knk_fast[3] is a runtime cylinder-specific fast retard before adaptation, iga_ad_1_knk[3] a runtime individual adaptation value, and lv_knk_ctl_lim a control-limit flag. These are different stages, not interchangeable editable maps. Confirm index-to-cylinder mapping, sign conventions and channel availability in the logger.
Transient knock prevention
The SC8S5031 transient-prevention reference describes ip_iga_tra_knk as a transient-retard map versus engine speed and predicted cylinder air mass, and ip_fac_iga_tra as a factor versus cylinder intake-air temperature tia_cyl and the adaptation factor fac_ad_knk. Preventive transient correction is not, by itself, proof of a detected knock event. fac_ad_knk is a runtime global adaptation factor, not a direct fuel-octane measurement.
Comparing and diagnosing logs
Record fuel and actual ethanol content, rpm, gear, air mass, pressure, temperature, lambda target and actual, combustion mode, final and individual-cylinder ignition timing, and each cylinder's knock correction. Compare like-for-like operating points and note active torque intervention and detection state where available. A repeatable cylinder-specific event warrants investigation of fuel, plugs, coils, mechanical condition, sensor mounting and interference as well as calibration; an isolated event or a clean average cannot establish its cause. Do not use a single numerical retard value as a universal safe threshold.
Forum case: correction and a reported low-speed surge
In a 2025 Simos 18 discussion on MHH Auto, the owner of a 2016 CHHB 2.0 TSI with DQ250, an open intake and modified exhaust reported corrections on several cylinders down to −4.88° while using fuel described as 100 octane. With one calibration, the owner also described a low-rpm symptom as turbo surge. In a later post, they reported actual boost overshooting its target during acceleration. These are owner observations, not an independently diagnosed cause or a validated surge measurement; the fuel-rating convention and comparable test conditions were not established. The report does not establish a safe correction or timing limit.
When investigating a similar complaint, capture synchronized boost target and actual, wastegate command or position, rpm, throttle, gear and per-cylinder correction alongside the fuel, temperature, air charge, lambda and timing channels above. Check pressure units and whether readings are absolute or gauge, and assess the reported noise and boost control separately from the knock response. Compare repeatable operating points before attributing either symptom to a specific calibration.
For global adaptation and low-RON detection examples, see Simos 18 fuel octane and knock adaptation.
Related: ignition and knock overview · ignition timing · knock detection and control · tuning and log diagnosis · ethanol and flex fuel.