Simos 18 knock detection and control
Page history
Ordinary publications create revisions. Restoring an earlier version publishes it as a new revision. Administrators can also edit without a revision or delete history.
| Revision | Published | Contributor | Change | Actions |
|---|---|---|---|---|
| 10 Current | llandowtuninguk@gmail.com | Rewrite in encyclopaedic voice around findings | ||
| 9 | llandowtuninguk@gmail.com | Add scoped example from stock and Stage 1 Simos 18.1 calibration comparison | ||
| 8 | llandowtuninguk@gmail.com | Distinguish acquisition gain, threshold factors and transient knock detection. | ||
| 7 | llandowtuninguk@gmail.com | Add sourced knock noise-adaptation signals, loop delays and rebuilt-engine diagnostic case | ||
| 6 | llandowtuninguk@gmail.com | Link low-speed pre-ignition and knock guide | ||
| 5 | llandowtuninguk@gmail.com | Correct formatting of forum case | ||
| 4 | llandowtuninguk@gmail.com | Add attributed CHHB owner case for knock correction and reported boost overshoot | ||
| 3 | llandowtuninguk@gmail.com | Document knock filter coding and noise calculation while clarifying temperature input | ||
| 2 | llandowtuninguk@gmail.com | Link detailed fuel octane and knock adaptation guide | ||
| 1 | llandowtuninguk@gmail.com | Add sourced Simos 18 ignition and knock-control research |