Basic angle and torque reference
Scope: These are EA888 Simos 18 examples, mainly 18.1. Exact ECU hardware, engine, transmission, software, calibration and patches determine whether a function or definition applies. Community labels are research leads: confirm the target A2L, axes, units, scaling, selectors and logs. Neither listed names nor file ranges are recommended settings.
Ignition timing and fuel quality influence combustion, torque and component temperature. The EcuTek EA888 Mk7 tuning guide distinguishes base ignition from reference or best-torque angle relationships in the EA888 strategy. EcuTek RaceROM V3 can replace certain ignition maps with its own per-mode maps; confirm which path is enabled. Requested, reference and delivered angles are different signals; an apparently attractive timing number does not by itself establish best torque or a healthy combustion margin.
Community map families
The bri3d a2l2xdf community definition list groups ip_iga_bas_ivvt_vvl_port_h and ip_iga_bas_ivvt_vvl_port_l as basic ignition families, and ip_iga_ref_ivvt_vvl_port_h and ip_iga_ref_ivvt_vvl_port_l as reference/MBT families. The entries are indexed for lift and cam selections in that community definition. Confirm flap/lift/cam selection, axes and map purpose for the actual ECU: a reference torque/efficiency map should not be assumed to be the directly commanded spark map.
Sound-specific impulse ignition is a separate operating path described in Simos 18 pops and bangs; do not confuse its sound-flap selector with an intake flap or transfer its values to normal-load timing.
Detailed ignition and knock guides
See the separate ignition timing guide for lean/rich basic-angle maps, lambda interpolation and temperature-correction examples, and knock detection and control for sensing windows, thresholds, response and adaptation. These are different parts of the control system; a knock-retard trace alone cannot show the selected base map or prove that detection is working.
Interpreting a log
Record fuel and ethanol content, rpm, gear, engine load/air charge, intake and coolant temperatures, lambda, actual ignition angle and individual-cylinder knock corrections where exposed. Compare repeatable operating conditions. The ECU can alter timing for knock, temperature or torque control; one correction channel is not a full description of combustion.
Zero logged knock correction alone is not proof of ideal timing or a safe setup, especially if sensor calibration, logging or engine conditions differ. Investigate fuel quality, mechanical condition, sensor and calibration context rather than weakening a protection to make a trace look cleaner. For a specific setup, use suitable measurement and controlled evaluation.
Related guides: bigger turbos · wastegate and boost control · fuel-system and MPI upgrades · ethanol and flex fuel · torque model and DSG · ignition and knock · launch control · rolling anti-lag.
References reviewed 17 November 2026. Forum accounts are reported observations, not independently verified fixes.