Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning
Parent
Simos 18
Applies to
Simos 18.1
Tool groups
None
Manufacturers
Volkswagen Group

Applicability: Engineering identifiers below are examples from the community SC8S5031_C_OEM Simos 18.1 cross-reference unless a product or different software is named. Definitions are research leads, not universal calibration values: match the ECU hardware, ASW, A2L, indexing, units, axes, scaling, signs and actual configuration. The community extraction can contain mismatched descriptions or indices. SC8S5031 reference.

Detection and response are different

Knock-sensor signals are filtered and assessed within operating windows; the strategy can then apply rapid per-cylinder retard and learned corrections. A low or absent logged correction does not prove no knock: the detection state, signal availability, mechanical noise, sample rate and logger scaling all matter. Examine each cylinder and final timing alongside fuel, load, temperatures and lambda. COBB documents Knock Dataset Selection (filter selection can vary with injection mode), Knock Window State, individual Knock Retard Cylinder 1 through 4, and an average for supported MQB applications. These are logger display names, not calibration maps or a guarantee of availability. COBB monitor descriptions.

Measurement and detection examples

The SC8S5031 KNCK detection cross-reference lists the following calibrations:

  • ip_knkwb[3] and ip_knkwd[3]: start and duration of an individual cylinder's knock measurement window; example axes are speed and cylinder air mass, with crank-angle outputs. An index must be matched to the software and firing-order/cylinder mapping.
  • ip_knks_thd_fac_1[3]: one knock-detection threshold factor, selected when the documented filter/gain index is 1. The displayed axes are speed and predicted cylinder air mass. It is one factor in threshold calculation, not a direct universal knock limit.
  • ip_knkwb_pre_h_rng[3] and ip_knkwd_pre[3]: examples associated with the pre-window, distinct from the main window. lv_knk_win_ovlp and nl_ref[3] are runtime window and noise-reference measurements, not tables.

Window, filter, gain and threshold calibration determine what the ECU can detect; changing them to hide correction can compromise detection. An independent Mk7 noise-and-knock investigation illustrates how noise and detection thresholds affect logged correction; its vehicle test is not a universal calibration. Validate any detection recalibration with suitable cylinder-pressure and acoustic measurements rather than inferring it from a clean-looking log.

Knock response and learning examples

In the KNCK control reference, ip_iga_dec_knk describes spark retard at recognised knock, and ip_iga_max_knk the maximum retard correction; the displayed examples use speed and cylinder air mass. ip_fac_iga_dec_knk is a knock-response factor against knock energy and engine speed. They are response/protection calibrations, not recommended reduced settings.

ip_iga_inc_knk appears with an XDF label suggesting decay, while its extracted A2L description describes an increase in integrated correction when knock is detected. Treat its exact behaviour as unresolved until the target's definition and implementation are checked; do not infer a universal recovery rate from its name.

iga_cyl_knk_fast[3] is a runtime cylinder-specific fast retard before adaptation, iga_ad_1_knk[3] a runtime individual adaptation value, and lv_knk_ctl_lim a control-limit flag. These are different stages, not interchangeable editable maps. Confirm index-to-cylinder mapping, sign conventions and channel availability in the logger.

Transient knock prevention

The SC8S5031 transient-prevention reference describes ip_iga_tra_knk as a transient-retard map versus engine speed and predicted cylinder air mass, and ip_fac_iga_tra as a factor versus cylinder temperature and the adaptation factor fac_ad_knk. Preventive transient correction is not, by itself, proof of a detected knock event. fac_ad_knk is a runtime global adaptation factor, not a direct fuel-octane measurement.

Comparing and diagnosing logs

Record fuel and actual ethanol content, rpm, gear, air mass, pressure, temperature, lambda target and actual, combustion mode, final and individual-cylinder ignition timing, and each cylinder's knock correction. Compare like-for-like operating points and note active torque intervention and detection state where available. A repeatable cylinder-specific event warrants investigation of fuel, plugs, coils, mechanical condition, sensor mounting and interference as well as calibration; an isolated event or a clean average cannot establish its cause. Do not use a single numerical retard value as a universal safe threshold.

For global adaptation and low-RON detection examples, see Simos 18 fuel octane and knock adaptation.

Related: ignition and knock overview · ignition timing · knock detection and control · tuning and log diagnosis · ethanol and flex fuel.