Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Injectors
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Injector catalogue › Petrol › Port | Direct | Diesel

Petrol injectors are organised here by where the nozzle delivers fuel. Port injectors meter fuel into the intake; gasoline direct injectors deliver it into the combustion chamber. Some engines use both. Identify the complete part, not only its connector or colour.

Browse the catalogue

A Deka VII petrol fuel injector
Deka VII port-injector example; the photograph is illustrative and is not identified as any particular entry below. Photo: David DeGrace via Wikimedia Commons, CC BY-SA 3.0; unchanged.
BMW petrol direct-injection cutaway with an injector in the cylinder head
BMW direct-injection engine cutaway, showing the injector directed into the combustion chamber; illustration only, not a part-number identification. Photo: Ton1 via Wikimedia Commons, CC BY-SA 3.0; unchanged.

Comparing ratings

A port injector's cc/min figure needs a test liquid, temperature and pressure difference to be meaningful. Static flow does not define the electrical offset or short-pulse delivery needed by the ECU. Direct-injection parts need their own high-pressure and pulse-specific test conditions. Bosch's injection-valve information explains static-flow pressure conversion and voltage-dependent delay; Bosch's HDEV 5.2 datasheet illustrates the separate GDI operating conditions.