Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Performance
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 2 to revision 3

Removed text is struck through; added text is highlighted.

Tuning businesses sell upgrades in "stages", but no standard defines them. Sellers state this themselves: what a stage means varies from car to car and from tuner to tuner (Viezu), and naming runs from 1, 1+ and 2 to as high as 5 (8020 Automotive). Across sellers the broad pattern is consistent: Stage 1 is a calibration change on an otherwise standard car, Stage 2 adds bolt-on parts that help the engine breathe, and Stage 3 changes major hardware such as the turbocharger, fuel system or internals. The power gains quoted for each stage are seller claims; no independent before-and-after measurements of stage packages on production cars have been published in the sources reviewed.What each stage commonly includesStageTurbocharged petrolTurbodieselNaturally aspirated petrol 1Calibration only, on a healthy standard car; sometimes with an intake or an exhaust that keeps the catalystsCalibration only: fuel quantity, boost, timing, torque limitsCalibration only; little to gain without hardware 2Calibration matched to a downpipe, intake and uprated intercooler or charge cooler; sometimes a smaller supercharger pulleyCalibration matched to intercooler and exhaust changes; often a clutch able to hold the extra torqueCalibration matched to headers, intake and exhaust 3 and aboveLarger or hybrid turbocharger, injectors and fuel pump, often forged pistons and rodsHybrid or larger turbocharger, larger injectors, sometimes a higher-capacity high-pressure pumpCamshafts, porting, compression or forced inductionHigher stages also need the rest of the car to keep up: clutch, gearbox, cooling, brakes, tyres and suspension. Sellers differ on details such as whether a downpipe belongs in Stage 1 or 2, so the contents of a specific package matter more than its number. A package's parts list is compared with the supporting pages on this wiki: air (intake, exhaust, charge cooling), fuel (fuel system upgrades, pumps and lines, E85), calibration and measurement (ECU remapping, boost control, ignition tuning, lambda, data logging), and survival (pistons and rods, head gaskets and studs, cooling, oil, traction).How far the quoted gains can be trustedStage 1 gains quoted by UK remapping businesses, all vendor claims:Engine typeQuoted Stage 1 gainSellers Naturally aspirated petrolAbout 5 to 15 % powerQuantum Tuning; Sinspeed; 8020 Automotive Turbocharged petrolAbout 20 to 30 % powerCeltic Tuning TurbodieselAbout 20 to 35 % torque, and claims up to 40 to 50 % powerQuantum Tuning; Celtic Tuning; SinspeedThe sellers disagree on the size of the gains but agree on the order: turbodiesel and turbocharged petrol gain far more from calibration alone than naturally aspirated engines. That order has a clear mechanical reason. A naturally aspirated engine at full throttle is limited to roughly atmospheric manifold pressure, so a calibration can only refine fuel and ignition. On a turbocharged engine the ECU also sets boost through the wastegate or turbine vanes, and raising boost is largely a matter of calibration tables (HP Academy). Turbodiesels are commonly delivered with conservative fuel and torque limits, which is why their quoted torque gains are the largest.No published magazine or academic before-and-after dyno test of production remap packages was found. Germany's ADAC states that the real gain can only be established by before-and-after runs on a professional dynamometer, notes that type approval already allows a ±5 % output tolerance, and warns that cheap offers often fail to deliver. The one academic study found, on a Euro 3 diesel with modified maps measured in urban traffic, recorded fuel dose up 23 % around maximum torque and 15 % near peak power, with large rises in carbon monoxide (Merkisz et al., 2020; seen in abstract only). A gain figure is therefore treated as a claim until a before-and-after measurement on the same dyno, in comparable conditions, is supplied.Generic and bespoke filesA generic file is pre-made for a make, model and engine. It does not account for the car's condition, mileage, modifications, fuel quality or altitude. A bespoke calibration involves reading the ECU, a health check, logging, tailored changes and dyno or road verification (CSC Motors). At higher stages a generic file leaves more of the risk with the owner, because the hardware the file assumes is more likely to differ from the car. See how an ECU is remapped and common misconceptions about remapping.UK legal and insurance pointsDiesel particulate filters. Since February 2014, MOT testers check for a DPF; a vehicle fails if a filter fitted as standard is missing, and driving a vehicle modified that way is an offence (DfT and DVSA, 2013). Since 20 May 2018, evidence of DPF tampering and the condition of other emissions equipment, including EGR valves, oxygen and NOx sensors, are MOT test items (GOV.UK). Packages that remove or disable DPF, EGR or AdBlue systems are sometimes sold for "off-road" or motorsport use; on a road vehicle they are not lawful. DVSA has run roadside checks for AdBlue emulators on heavy goods vehicles since September 2018. Insurance. The Financial Ombudsman Service upheld an insurer voiding a policy over an undeclared ECU remap and exhaust change, and advises declaring modifications even if they were made before purchase (FOS, 30 September 2024). Disclosure duties follow the Consumer Insurance (Disclosure and Representations) Act 2012. Elsewhere. In Germany, ADAC notes that a power change requires approval and must be reported to the insurer. Rules differ between countries.Tuners sell upgrades in "stages", but there is no standard definition. The meaning varies from car to car and engine to engine, with some brands using 1, 1+ and 2, others 1 to 3, and some going to 5 (8020 Automotive). This page describes the common pattern and the questions to ask before buying a package. The gain figures here are one retailer's ranges, not results for any given car.The common patternStage 1. A calibration change for an essentially standard car. Typical ranges quoted are about 5 to 20 hp for naturally aspirated engines and often 20 to 50 or more for turbocharged ones, with an intake, cat-back exhaust or blow-off valve as the usual supporting parts. It assumes a healthy, well-maintained, standard vehicle, and allows only very minor changes such as a filter that does not significantly alter airflow (CSC Motors). Stage 2. A calibration matched to bolt-on hardware that helps the engine breathe: typically an upgraded intake and a performance exhaust. Headers on a naturally aspirated engine or downpipes on a turbo engine are common additions, with an uprated front intercooler as a common cooling upgrade. A "Stage 2+" may need camshafts or pulleys and a higher octane or ethanol fuel. Stage 3 and above. Major hardware: a larger turbo or supercharger, extensive fuel system upgrades and often strengthened internals such as rods, pistons, bearings and head studs, plus brakes, suspension, differential, tyres and cooling. It is often suited to track use.The two sources agree on the shape and differ on detail, which is the point: check what a specific tuner's package contains and what parts it assumes.What changes as the stage risesThe common thread is that every added unit of output adds a demand elsewhere. In this wiki's pages the demands map out like this:Air. Air filters, intake ducting and restriction, exhaust system tuning and charge cooling. Fuel. Fuel system upgrades, fuel pumps, regulators and lines and E85 and flex fuel. Calibration and measurement. ECU remapping, boost control, ignition timing, lambda and data logging. Survival. Pistons and rods, head gaskets and studs, cooling and oil. Getting the power down. Power, weight and traction, the clutch and the gearbox.Generic and bespoke tunesA generic tune is a pre-made file for a range of vehicles of the same make, model and engine. It does not account for the car's condition, mileage, modifications or the fuel quality and altitude it will see. A bespoke tune involves reading the ECU, a diagnostic health check, data logging, tailored calibration and dyno testing (CSC Motors). A higher stage on a generic file leaves more of the risk with the owner. See how an ECU is remapped and common misconceptions about remapping.

Questions to ask before buying

What exactly does this stage contain, which parts must already be fitted, and which are assumed but not supplied? Is the file generic or built for this car, and will it be verified on a dyno or by road logs? Will a before-and-after measurement on the same dyno be provided, rather than a quoted percentage? What fuel does the calibration assume, and what happens on a lower grade? What condition checks come first: compression, leaks, boost, fuel pressure, stored faults? Which parts of the car limit at this level: clutch, tyres, cooling, brakes? Does the package keep all emissions equipment working, and will it pass an MOT? Has the modification been declared to the insurer?All modification is at the owner's risk. What will be measured and reported is best agreed before work starts; see engine performance upgrades and planning a performance engine build.Not establishedNo independent, published before-and-after measurement of stage packages on production cars was found, so the size of typical gains rests on seller claims.What exactly is included in this stage, and which parts must already be fitted? Which supporting parts are assumed but not sold? Is the file generic or built for this car, and is it checked on a dyno or a road log? What does the package assume about fuel, and what happens if the car is run on a lower grade? What condition checks come first: compression, leaks, boost, fuel pressure, codes? Which parts of the car limit at this level: clutch, tyres, cooling, brakes? Is the package legal for the intended use? Some packages include options, such as removing a diesel particulate filter, that are only lawful for off-road or motorsport use. Emissions equipment, insurance, warranty and roadworthiness rules vary by country, and neither source covers them, so ask the tuner and your insurer and check local law.All engine modification and tuning is at the owner's risk. More power adds stress the engine may or may not tolerate, and a tuner's own recommendations should be followed over a generic parts list. Agree what will be measured and reported before the work starts, as set out under agreeing the work with a tuning provider on engine performance upgrades, and see planning a performance engine build for a planning order.

Sources

Stage tuning and ECU remapping explained. Viezu, undated. Stage contents and lack of a standard. Vendor. Accessed 2026-11-19. Tuning stages: Stage 1, 2, 3. 8020 Automotive, 15 October 2021, updated 22 January 2024. Stage naming and ranges. Retailer. Accessed 2026-11-19. Explaining Stage 1, Stage 2 and Stage 3 remapping. Craig Burns, CSC Motors, 13 June 2025. Prerequisites; generic against bespoke files. Vendor. Accessed 2026-11-19. ECU remap tuning. Quantum Tuning, undated. Diesel and NA petrol gain claims; wastegate control. Vendor. Accessed 2026-11-19. FAQ. Celtic Tuning, 14 April 2026. Turbo petrol and diesel gain claims. Vendor. Accessed 2026-11-19. Mobile ECU remapping. Sinspeed, undated; search excerpt. Gain claims. Vendor. Accessed 2026-11-19. Advanced tuning: boost control. HP Academy. Boost as a calibration change on turbocharged engines. Tuning school. Accessed 2026-11-19. Chiptuning und Eco-Tuning. ADAC, 10 October 2025. Measurement, tolerance, approval and insurance. Consumer organisation. Accessed 2026-11-19. Merkisz, Bajerlein and Zieliński, The impact of engine map modification. Combustion Engines, 2020; abstract only. Academic. Accessed 2026-11-19. New rules for MOT to test for diesel particulate filter. DfT and DVSA, 4 December 2013. Regulator. Accessed 2026-11-19. MOT inspection manual changes. GOV.UK, May 2018. DPF tampering and emissions equipment as test items. Regulator. Accessed 2026-11-19. DVSA rolls out emissions enforcement nationwide. Transport Operator, 20 September 2018. Trade press reporting DVSA. Accessed 2026-11-19. Car modifications can wreck insurance. Financial Ombudsman Service, 30 September 2024. Ombudsman. Accessed 2026-11-19.Tuning Stages - Stage 1, 2, 3, Tunes. 8020 Automotive, 15 October 2021 (updated 22 January 2024). Stage ranges, typical mods and the variability of definitions. Retailer figures. Accessed 2026-11-19. Explaining Stage 1, Stage 2, and Stage 3 remapping. Craig Burns, CSC Motors, 13 June 2025. Stage prerequisites and generic against bespoke tunes. Accessed 2026-11-19.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Tuning stages explained: what Stage 1, 2 and 3 mean

Tuners sell upgrades in "stages", but there is no standard definition. The meaning varies from car to car and engine to engine, with some brands using 1, 1+ and 2, others 1 to 3, and some going to 5 (8020 Automotive). This page describes the common pattern and the questions to ask before buying a package. The gain figures here are one retailer's ranges, not results for any given car.

The common pattern

  • Stage 1. A calibration change for an essentially standard car. Typical ranges quoted are about 5 to 20 hp for naturally aspirated engines and often 20 to 50 or more for turbocharged ones, with an intake, cat-back exhaust or blow-off valve as the usual supporting parts. It assumes a healthy, well-maintained, standard vehicle, and allows only very minor changes such as a filter that does not significantly alter airflow (CSC Motors).
  • Stage 2. A calibration matched to bolt-on hardware that helps the engine breathe: typically an upgraded intake and a performance exhaust. Headers on a naturally aspirated engine or downpipes on a turbo engine are common additions, with an uprated front intercooler as a common cooling upgrade. A "Stage 2+" may need camshafts or pulleys and a higher octane or ethanol fuel.
  • Stage 3 and above. Major hardware: a larger turbo or supercharger, extensive fuel system upgrades and often strengthened internals such as rods, pistons, bearings and head studs, plus brakes, suspension, differential, tyres and cooling. It is often suited to track use.

The two sources agree on the shape and differ on detail, which is the point: check what a specific tuner's package contains and what parts it assumes.

What changes as the stage rises

The common thread is that every added unit of output adds a demand elsewhere. In this wiki's pages the demands map out like this:

Generic and bespoke tunes

A generic tune is a pre-made file for a range of vehicles of the same make, model and engine. It does not account for the car's condition, mileage, modifications or the fuel quality and altitude it will see. A bespoke tune involves reading the ECU, a diagnostic health check, data logging, tailored calibration and dyno testing (CSC Motors). A higher stage on a generic file leaves more of the risk with the owner. See how an ECU is remapped and common misconceptions about remapping.

Questions to ask before buying

  1. What exactly is included in this stage, and which parts must already be fitted? Which supporting parts are assumed but not sold?
  2. Is the file generic or built for this car, and is it checked on a dyno or a road log?
  3. What does the package assume about fuel, and what happens if the car is run on a lower grade?
  4. What condition checks come first: compression, leaks, boost, fuel pressure, codes?
  5. Which parts of the car limit at this level: clutch, tyres, cooling, brakes?
  6. Is the package legal for the intended use? Some packages include options, such as removing a diesel particulate filter, that are only lawful for off-road or motorsport use. Emissions equipment, insurance, warranty and roadworthiness rules vary by country, and neither source covers them, so ask the tuner and your insurer and check local law.

All engine modification and tuning is at the owner's risk. More power adds stress the engine may or may not tolerate, and a tuner's own recommendations should be followed over a generic parts list. Agree what will be measured and reported before the work starts, as set out under agreeing the work with a tuning provider on engine performance upgrades, and see planning a performance engine build for a planning order.

Sources

Revision 3: Tuning stages explained: what Stage 1, 2 and 3 mean

Tuning businesses sell upgrades in "stages", but no standard defines them. Sellers state this themselves: what a stage means varies from car to car and from tuner to tuner (Viezu), and naming runs from 1, 1+ and 2 to as high as 5 (8020 Automotive). Across sellers the broad pattern is consistent: Stage 1 is a calibration change on an otherwise standard car, Stage 2 adds bolt-on parts that help the engine breathe, and Stage 3 changes major hardware such as the turbocharger, fuel system or internals. The power gains quoted for each stage are seller claims; no independent before-and-after measurements of stage packages on production cars have been published in the sources reviewed.

What each stage commonly includes

StageTurbocharged petrolTurbodieselNaturally aspirated petrol
1Calibration only, on a healthy standard car; sometimes with an intake or an exhaust that keeps the catalystsCalibration only: fuel quantity, boost, timing, torque limitsCalibration only; little to gain without hardware
2Calibration matched to a downpipe, intake and uprated intercooler or charge cooler; sometimes a smaller supercharger pulleyCalibration matched to intercooler and exhaust changes; often a clutch able to hold the extra torqueCalibration matched to headers, intake and exhaust
3 and aboveLarger or hybrid turbocharger, injectors and fuel pump, often forged pistons and rodsHybrid or larger turbocharger, larger injectors, sometimes a higher-capacity high-pressure pumpCamshafts, porting, compression or forced induction

Higher stages also need the rest of the car to keep up: clutch, gearbox, cooling, brakes, tyres and suspension. Sellers differ on details such as whether a downpipe belongs in Stage 1 or 2, so the contents of a specific package matter more than its number. A package's parts list is compared with the supporting pages on this wiki: air (intake, exhaust, charge cooling), fuel (fuel system upgrades, pumps and lines, E85), calibration and measurement (ECU remapping, boost control, ignition tuning, lambda, data logging), and survival (pistons and rods, head gaskets and studs, cooling, oil, traction).

How far the quoted gains can be trusted

Stage 1 gains quoted by UK remapping businesses, all vendor claims:

Engine typeQuoted Stage 1 gainSellers
Naturally aspirated petrolAbout 5 to 15 % powerQuantum Tuning; Sinspeed; 8020 Automotive
Turbocharged petrolAbout 20 to 30 % powerCeltic Tuning
TurbodieselAbout 20 to 35 % torque, and claims up to 40 to 50 % powerQuantum Tuning; Celtic Tuning; Sinspeed

The sellers disagree on the size of the gains but agree on the order: turbodiesel and turbocharged petrol gain far more from calibration alone than naturally aspirated engines. That order has a clear mechanical reason. A naturally aspirated engine at full throttle is limited to roughly atmospheric manifold pressure, so a calibration can only refine fuel and ignition. On a turbocharged engine the ECU also sets boost through the wastegate or turbine vanes, and raising boost is largely a matter of calibration tables (HP Academy). Turbodiesels are commonly delivered with conservative fuel and torque limits, which is why their quoted torque gains are the largest.

No published magazine or academic before-and-after dyno test of production remap packages was found. Germany's ADAC states that the real gain can only be established by before-and-after runs on a professional dynamometer, notes that type approval already allows a ±5 % output tolerance, and warns that cheap offers often fail to deliver. The one academic study found, on a Euro 3 diesel with modified maps measured in urban traffic, recorded fuel dose up 23 % around maximum torque and 15 % near peak power, with large rises in carbon monoxide (Merkisz et al., 2020; seen in abstract only). A gain figure is therefore treated as a claim until a before-and-after measurement on the same dyno, in comparable conditions, is supplied.

Generic and bespoke files

A generic file is pre-made for a make, model and engine. It does not account for the car's condition, mileage, modifications, fuel quality or altitude. A bespoke calibration involves reading the ECU, a health check, logging, tailored changes and dyno or road verification (CSC Motors). At higher stages a generic file leaves more of the risk with the owner, because the hardware the file assumes is more likely to differ from the car. See how an ECU is remapped and common misconceptions about remapping.

UK legal and insurance points

  • Diesel particulate filters. Since February 2014, MOT testers check for a DPF; a vehicle fails if a filter fitted as standard is missing, and driving a vehicle modified that way is an offence (DfT and DVSA, 2013). Since 20 May 2018, evidence of DPF tampering and the condition of other emissions equipment, including EGR valves, oxygen and NOx sensors, are MOT test items (GOV.UK). Packages that remove or disable DPF, EGR or AdBlue systems are sometimes sold for "off-road" or motorsport use; on a road vehicle they are not lawful. DVSA has run roadside checks for AdBlue emulators on heavy goods vehicles since September 2018.
  • Insurance. The Financial Ombudsman Service upheld an insurer voiding a policy over an undeclared ECU remap and exhaust change, and advises declaring modifications even if they were made before purchase (FOS, 30 September 2024). Disclosure duties follow the Consumer Insurance (Disclosure and Representations) Act 2012.
  • Elsewhere. In Germany, ADAC notes that a power change requires approval and must be reported to the insurer. Rules differ between countries.

Questions to ask before buying

  1. What exactly does this stage contain, which parts must already be fitted, and which are assumed but not supplied?
  2. Is the file generic or built for this car, and will it be verified on a dyno or by road logs?
  3. Will a before-and-after measurement on the same dyno be provided, rather than a quoted percentage?
  4. What fuel does the calibration assume, and what happens on a lower grade?
  5. What condition checks come first: compression, leaks, boost, fuel pressure, stored faults?
  6. Which parts of the car limit at this level: clutch, tyres, cooling, brakes?
  7. Does the package keep all emissions equipment working, and will it pass an MOT?
  8. Has the modification been declared to the insurer?

All modification is at the owner's risk. What will be measured and reported is best agreed before work starts; see engine performance upgrades and planning a performance engine build.

Not established

No independent, published before-and-after measurement of stage packages on production cars was found, so the size of typical gains rests on seller claims.

Sources