Siemens and Continental diesel
Index of the Siemens and Continental diesel controllers: SID common rail, the PPD piezo pump-injector, and PCR 2.1. Each name is a different unit.
Tuning Guides
Browse calibration and tuning guides for Siemens and Continental diesel. Check the ECU hardware, software and vehicle stated in each guide before applying it. Variant guides and shared family references are listed separately.
Guides for this ECU
No tuning guides are assigned directly to this ECU yet.
Variant-specific guides
-
PSA HDi and BlueHDi diesel tuning guide
PSA diesel ECU identification, EDC15 and EDC16 tuning research, MD1CS003 torque and programming evidence.
Applies to: Bosch EDC16C34Bosch MD1CS003Delphi DCMSiemens SID
-
Renault K9K 1.5 dCi tuning guide
K9K 1.5 dCi engine and ECU identification across Delphi, Continental SID and Bosch controllers, pre-tuning health checks, calibration areas, logging and validation, with source limits.
Applies to: Bosch EDC17C42Bosch EDC17C84Continental SID301Continental SID305Continental SID307Continental SID310Delphi DCM 1.1Delphi DCM 1.2Delphi DCM 3.4
-
Renault M9T 2.3 dCi tuning guide
M9T 2.3 dCi single and twin-turbo van and pick-up engine, Bosch EDC17C11 and EDC17C42 and Continental SID309 and SID310 identification, checks, calibration and validation.
Applies to: Bosch EDC17C11Bosch EDC17C42Continental SID310
-
PSA ECU identification and tuning guide
Peugeot, Citroën and DS petrol and diesel ECU identification, tuning references and programming considerations.
Applies to: Bosch EDC16C34Bosch MD1CS003Bosch MED17.4Bosch MED17.4.2Bosch MG1CS032Delphi DCMSiemens SID
-
Volvo 2.0D SID803 and SID803A tuning guide
Volvo 2.0D SID803 and SID803A identification, map research, programming and diagnostic context.
Applies to: Siemens SID
-
Volvo ECU identification and tuning guide
Sourced Volvo Motronic, EDC, SID and Denso ECU examples, with tuning and diagnostic considerations for selected engines.
Applies to: Bosch EDC16C31Bosch M4.3Bosch M4.4Denso petrolSiemens SID
Contribute a guide
Share a documented workflow, calibration observation or test result. Include the ECU identifiers, tools, test conditions and sources so others can build on it.