Tuning Wiki
Applies to

Check the hardware and software limits stated in this article.

Peugeot, Citroën and DS have used Bosch, Siemens/Continental, Delphi and other engine controllers across petrol and diesel ranges. Shared vehicle platforms, marketing badges or engine size do not guarantee the same ECU or calibration. These sourced examples are starting points, not a complete fitment list: confirm model year, market, engine code, gearbox, emissions equipment and the ECU's label and read identification.

Diesel application examples

  • 2.0 HDi, EDC15C2: HDI Tuning's Peugeot 306 90 hp example describes a mechanically pressure-operated turbo wastegate. It is not a blanket description of later 2.0 HDi systems.
  • 1.6 HDi, EDC16C34: a Berlingo owner reports Bosch 0281013872, PSA 9664843780 and software 1039398221, with proposed map identifications that remain unverified.
  • 2.0 HDi, SID803/803A: a Citroën training reproduction separately covers DW10BTED4 with Siemens SID and DV6TED4 with EDC16C34. Do not transfer boost control, rail definitions or programming methods just because vehicles share an HDi name.
  • 1.5 BlueHDi, MD1CS003: AutoTuner lists selected Peugeot, Citroën and DS applications and a vendor-specific unlock/bench route. Lock state, software, memory coverage and tool support depend on the unit.
  • 2.0 BlueHDi, Delphi DCM7.1A: Alientech's 2020 K-TAG release lists selected DW10 applications, including Peugeot 508 and Citroën C4 SpaceTourer, using boot for that release.

The PSA HDi and BlueHDi diesel tuning guide covers the EDC16 forum evidence, 1.5 BlueHDi torque modelling, boost diagnostics and programming references in more detail.

For diesels outside the passenger-car HDi examples, see the Peugeot and Citroën rotary-pump diesel guide, covering selected XUD, DW8 and DK5 systems, and the Boxer and Relay diesel guide, covering selected HDi and BlueHDi commercial-vehicle ECUs and access methods. For which pump and injector is fitted to each diesel engine code, see Peugeot and Citroën diesel injection pumps and injectors by engine code.

Petrol application examples

Practical tuning checks

Establish a fault-free baseline and match definitions to the exact read. For diesels, review torque request and limits alongside fuel conversion, air/smoke, injection, rail and turbo control; compare actual with requested signals at the same operating state. For petrol, examine torque/load, boost, fuel pressure, lambda and ignition/knock information together. Different sensor locations, aftertreatment and hybrid operating modes affect the comparison. Commercial labels, forum guesses and reported gains are not independently verified settings.

Record the original file and what memory it covers, identify checksum handling and a vehicle-specific recovery path, and check the current tool procedure before writing. Keep factory diagnostic and emissions functions operational. See the EDC16 torque and fuel fundamentals, MD1CS003 hub and Siemens SID hub for related context.

Continue the conversation

If this topic interests you, consider joining the following forums. They host material referenced in this article.