Tuning Wiki

Injector catalogue › Diesel injectors › Diesel injector testing

Testing guides: On-vehicle checks | Common-rail bench testing | Equipment | Results and coding | Mechanical, unit and HEUI.

Not every diesel injector is supplied by a common rail. Identify how the injector makes pressure and how it is actuated before selecting a test. A mechanical nozzle-holder test, a cam-driven unit-injector test and a hydraulically actuated HEUI test answer different questions.

Conventional mechanical nozzle and holder

Older systems often use a pump and a separate spring-loaded nozzle-holder assembly. With suitable equipment, the nozzle's opening pressure, leakage, spray shape and, where applicable, chatter can be assessed against the specification for that assembly. The Bosch EPS 100 is a hand-operated nozzle-holder tester for supported conventional assemblies; Bosch also specifies an oil-mist extraction accessory.

Use the prescribed clean test oil, fixture, guarding and extraction, and keep clear of the nozzle. A high-pressure jet can penetrate skin even when the injury initially looks small; seek emergency medical attention after suspected fluid injection. HSENI safety guidance. A nozzle-only test does not establish delivery from a modern electronic common-rail injector across its operating map.

Cam-driven unit injector and unit pump

A unit injector incorporates an engine-driven pumping element and nozzle; a unit pump has a separate nozzle connected to its pump. Testing the complete assembly requires a compatible drive or cambox, fixture, electrical controller and part-specific plan to reproduce its actuating conditions. The Hartridge HK1400 Expert is one example of a cambox solution for listed EUI/EUP/HPI applications, with application-specific accessories and test plans. Coverage of a family in a product brochure does not mean every workshop or configuration supports every part.

Bosch's diesel equipment brochure lists the EPS 205 for a supported unit-injector nozzle with a holding adapter. That is a different scope from testing an entire cam-driven unit injector under its complete plan. The wiki's diesel unit-injector systems page explains the mechanism.

HEUI

Hydraulic electronic unit injectors use a separate high-pressure oil-actuation system to pressurise fuel in the injector. An appropriate bench must reproduce the specified hydraulic actuation as well as the electrical and fuel conditions; a standard common-rail injector rail alone is not the test. The Hartridge Toledo HEUI Master is an example of a dedicated HEUI test platform. Use the injector-specific coverage and test plan, as explained alongside HEUI fuel systems.

What to ask before sending injectors

Supply the vehicle/engine, full injector number and photographs of the markings, fault history and whether complete assemblies or only nozzles are being supplied. Ask which test steps are available, whether a formal report or correction code is provided where applicable, and whether repair is supported. For example, Llandow Tuning's current service description says its diesel bench covers supported common-rail injectors and excludes VW PD unit injectors.

Sources