Tuning Wiki
Applies to

Check the hardware and software limits stated in this article.

Edelbrock E-Street 2 EFI: E-Street 2 is a later throttle-body EFI conversion using a separate ECU and compatible carburettor-style manifold flange. The original manufacturer brochure lists 3664/36649 base kits, 3665/36659 return-style fuel kits and 3667/36679 sump-fuel kits, with or without a tablet. The manufacturer’s legacy support page explicitly distinguishes original E-Street tablet updates from E-Street 2.

Edelbrock E-Street 2 EFI manufacturer illustration
E-Street 2 installation-manual cover; reproduced with permission from Edelbrock. Edelbrock source; reproduced with permission.

Selection and system layout

Identify the exact ECU, engine and kit part number, intake and throttle, sensor and ignition arrangement. The phone or tablet app is the calibration and monitoring interface, not the ECU. Fuel delivery, return plumbing and auxiliary components depend on the package. Consult the manufacturer documentation for the specific configuration.

Wiring documentation

Use the model-specific Edelbrock source for hardware and wiring. The E-Street 2 main harness schedule is transcribed below; do not substitute the assignment of another Pro-Flo or E-Street generation.

E-Street 2 main harness and ECU connector

From the Edelbrock E-Street 2 installation guide, printed page 18: 34-way connector, harness-side view. N/C is the marking on the illustrated harness and must not be treated as proof that a different ECU revision is internally disconnected. Positions 14 and 15 have printed colour labels but are marked N/C on this diagram. The E-Street 2 assignment differs from the original E-Street, notably at positions 2, 28, 32 and 34.

PositionSignal in drawingWire colour / note
1INJ ABLK/GRN
212V SW.PINK/BLK
3CURRENT LOOP TXD — N/C—
4LAMBDA CR1DK BLU
5COOLANT TEMPYEL/BLK
6AIR TTAN
7AC SWITCH INPUT — N/C—
8FUEL PRESSUREBRWN/YEL
9MAPGRN
10INJ BBLK/GREY
11LAMBDA VS+BLK/ORG
12LAMBDA IP+BLK/RED
13LAMBDA IP−BLK/YEL
14RS232 TXD (EFI) — marked N/CRED/BLU
15RS232 RXD (EFI) — marked N/CGRN/WHT
16TPSDK BLU
17DISTRIBUTOR/RPM SIGNALWHT/BLK
18INJ CBLK/WHT
19IAC (COIL 1A)WHT/VLT
20IAC (COIL 1B)WHT/RED
21IAC (COIL 2A)WHT/YEL
22IAC (COIL 2B)WHT/BLU
23GNDBLK/WHT/OR
24GNDBLK
25VREFGREY
26INJ DBLK/BLU
27RPM SIGNAL (COIL NEG)TAN/YEL
28COIL OUTPUT OR CDI TRIGGERWHT
29FAN 1 OUTPUT — N/C—
30FAN 2 OUTPUT — N/C—
31LAMBDA VH−VLT
32FUEL PUMP RELAYTAN/WHT
33GNDBLACK
34BLUETOOTH ANTENNAShielded lead, drawing S7