Tuning Wiki

A turbocharger uses exhaust gas to drive a turbine. The turbine and compressor share a shaft, so the turbine drives the compressor and raises the pressure of the intake air. A charge cooler can reduce the temperature of that compressed air before it reaches the engine. Garrett turbocharger system overview

How boost is controlled

A wastegate controls how much exhaust bypasses the turbine. A variable-geometry turbo changes the flow through the turbine using adjustable vanes. Identify the turbo and its actuator from the vehicle documentation before applying a test procedure. Turbocharger actuators and boost control

Start with the whole system

For poor boost, noise or smoke, check the air path, charge hoses, intercooler, exhaust restrictions and oil supply or drain as applicable. Compare requested and measured boost where available. A turbo damaged by an upstream problem can fail again if only the turbo is replaced. Garrett diagnostic guidance

For upgrades, start with the intended operating range and the existing airflow, boost control and cooling. Turbocharger upgrades and modifications

For a step-by-step investigation of poor boost, including pressure measurements, control checks and a worked 1.8T case, see turbo diagnostics.