Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning Software
Parent
Section level
Applies to
Bosch MG1, Bosch MEVD17, Siemens MSD
Tool groups
Diagnostic tools, Flashing and tuning tools
Manufacturers
BMW, Toyota

Changes from revision 3 to revision 3

Removed text is struck through; added text is highlighted.

MHD Flasher is MHD Tuning's Android and iOS application for ECU flashing, diagnostics and monitoring on selected BMW and Toyota Supra platforms. Its features include off-the-shelf (OTS) and custom maps, gauges and logs, and platform-dependent MHD+ functions. Consult the MHD user guide and the manufacturer's supported-vehicle list before choosing a licence or connection.

Engine and vehicle coverage

Examples below are drawn from the vendor's May 2025 supported-vehicle list and subsequent app release notes. Engine-family coverage does not establish support for every chassis, model year, market, DME or software version. Confirm the VIN, ECU, unlock state and exact licence in the app or with MHD.

EngineManufacturer-listed examples and related references N54Selected 135i, 335i, 535i, 335is, Z4 35i/35is, 1M and X6 35i. Related N54 controller labels include MSD80 and MSD81; identify the actual DME and software. N55 and S55N55 E- and F-series products cover listed 135i/335i, M135i/M235i/M2, 435i and other listed saloon and X models. S55 listings include F80 M3, F82/F83 M4 and F87 M2 Competition. Relevant ECU family: Bosch MEVD17. N13Listed F2x 114i/116i/118i and F3x 316i applications; check exact variant and ECU. B58 and S58Selected F/G BMW models and B58 Toyota A90 Supra; S58 listings include F97/F98 X3 M/X4 M, G80 M3, G82/G83 M4 and G87 M2. See Bosch MG1 for the ECU family. S63Listed F1x M5/M6, F85/F86 X5 M/X6 M and selected F90/F9x M applications. Product support and unlock requirements differ by generation. B48 generation 2The 19 March 2025 v4.88 release notes announce custom-tune flashing, logging and MHD+ for Gen2 B48. They do not establish an OTS map for every B48 or support for B46. Older unsupported-vehicle lists predate this update; check the exact vehicle and current app.

Licences, interface and unlock

Install the correct MHD app and use a compatible Android or iOS device and OBD interface. The hardware guide distinguishes the universal Wi-Fi adapter, older E-series adapter, K+DCAN/OTG and ENET options by vehicle generation and mobile operating system; they are not interchangeable for every platform. Licences are associated with an account and VIN; features and bundles vary. Check current licence and transfer terms.

Run the vendor's unlock check before planning the job. Some DME/software combinations need an unlock before OBD tuning. The MHD Unlocker is a bench tool with a specifically defined supported scope; the manufacturer lists B58 Gen1/Gen2, S58 and S63 F90, including 2020+ DMEs, and excludes N55/S55. An active eligible MHD licence and a running vehicle are among its stated requirements. The appropriate solution depends on the identified ECU and software, not simply the model year.

Flash procedure

Identify the car and DME, check for an unlock requirement, select the correct licence and interface, and address existing faults and mechanical issues.Use the OTS map guide to select the correct engine, hardware, fuel octane and transmission where requested. Map stages are product-specific, not universal performance specifications.Connect the interface, turn the ignition on with the engine off, use suitable battery support for the operation and switch off unnecessary electrical consumers. Keep the phone, interface and vehicle connection stable during the write.Select the map and compatible flash options; follow the app's full, long or short write instructions. Do not disconnect or interrupt programming. Follow the ignition-off prompt and wait as directed; the guide specifies at least 30 seconds after flashing.Check DME faults, confirm correct running and review suitable logs. If flashing fails, follow MHD's recovery instructions and support guidance.

A tuner can provide a compatible custom .bin or .mhd file for import; see custom tunes. MHD states that it cannot read and back up an existing third-party tune for arbitrary modification through its flash options; retain the original through the responsible tuner where applicable.

Stock, diagnostics and logs

Return to stock is distinct from an MHD Stage 0 map: check the guide for which software and features remain. MHD provides reading and clearing of supported DME fault codes and selected adaptation resets. Diagnose the cause before clearing a fault or resetting an adaptation.

Configurable gauges and data logs help assess parameters such as boost, load, temperatures and individual-cylinder ignition behaviour. Available channels and logging rates depend on DME, app and interface. Logs can be shared with the tuner; compare target and actual values and fuel pressure in context instead of treating a single value as proof of a healthy tune.

Flash options and MHD+

Depending on the engine, map and licence, flash options may include throttle response, idle, cooling, exhaust behaviour, torque or boost by gear and support for specified sensors or fuel hardware. Availability and suitability vary.

MHD+ Suite extends selected platforms with features such as multi-map switching, live adjustment and flex-fuel integration. The guide describes up to four maps on compatible setups; flex-fuel requires a supported ethanol sensor/kit, suitable fuel system, licence and calibration. Specific functions are tied to ECU software and tune, so confirm support for the actual car and installed equipment.

App screens and illustrated guides

The manufacturer's illustrated getting-started guide shows the account and app screens. The datalogging guide illustrates gauges and logging, while OTS maps illustrates map selection and flashing. Screen layout and available functions can change with app version and vehicle.

References

MHD online user guide: hardware, connection, flashing, diagnostics, logging, stock and MHD+.MHD supported vehicles, updated 30 May 2025.MHD Flasher product information and app release notes, including Gen2 B48 in version 4.88.MHD FAQ and MHD Unlocker. Sources accessed 17 November 2026.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: MHD Flasher

MHD Flasher is MHD Tuning's Android and iOS application for ECU flashing, diagnostics and monitoring on selected BMW and Toyota Supra platforms. Its features include off-the-shelf (OTS) and custom maps, gauges and logs, and platform-dependent MHD+ functions. Consult the MHD user guide and the manufacturer's supported-vehicle list before choosing a licence or connection.

Engine and vehicle coverage

Examples below are drawn from the vendor's May 2025 supported-vehicle list and subsequent app release notes. Engine-family coverage does not establish support for every chassis, model year, market, DME or software version. Confirm the VIN, ECU, unlock state and exact licence in the app or with MHD.

EngineManufacturer-listed examples and related references
N54Selected 135i, 335i, 535i, 335is, Z4 35i/35is, 1M and X6 35i. Related N54 controller labels include MSD80 and MSD81; identify the actual DME and software.
N55 and S55N55 E- and F-series products cover listed 135i/335i, M135i/M235i/M2, 435i and other listed saloon and X models. S55 listings include F80 M3, F82/F83 M4 and F87 M2 Competition. Relevant ECU family: Bosch MEVD17.
N13Listed F2x 114i/116i/118i and F3x 316i applications; check exact variant and ECU.
B58 and S58Selected F/G BMW models and B58 Toyota A90 Supra; S58 listings include F97/F98 X3 M/X4 M, G80 M3, G82/G83 M4 and G87 M2. See Bosch MG1 for the ECU family.
S63Listed F1x M5/M6, F85/F86 X5 M/X6 M and selected F90/F9x M applications. Product support and unlock requirements differ by generation.
B48 generation 2The 19 March 2025 v4.88 release notes announce custom-tune flashing, logging and MHD+ for Gen2 B48. They do not establish an OTS map for every B48 or support for B46. Older unsupported-vehicle lists predate this update; check the exact vehicle and current app.

Licences, interface and unlock

Install the correct MHD app and use a compatible Android or iOS device and OBD interface. The hardware guide distinguishes the universal Wi-Fi adapter, older E-series adapter, K+DCAN/OTG and ENET options by vehicle generation and mobile operating system; they are not interchangeable for every platform. Licences are associated with an account and VIN; features and bundles vary. Check current licence and transfer terms.

Run the vendor's unlock check before planning the job. Some DME/software combinations need an unlock before OBD tuning. The MHD Unlocker is a bench tool with a specifically defined supported scope; the manufacturer lists B58 Gen1/Gen2, S58 and S63 F90, including 2020+ DMEs, and excludes N55/S55. An active eligible MHD licence and a running vehicle are among its stated requirements. The appropriate solution depends on the identified ECU and software, not simply the model year.

Flash procedure

  1. Identify the car and DME, check for an unlock requirement, select the correct licence and interface, and address existing faults and mechanical issues.
  2. Use the OTS map guide to select the correct engine, hardware, fuel octane and transmission where requested. Map stages are product-specific, not universal performance specifications.
  3. Connect the interface, turn the ignition on with the engine off, use suitable battery support for the operation and switch off unnecessary electrical consumers. Keep the phone, interface and vehicle connection stable during the write.
  4. Select the map and compatible flash options; follow the app's full, long or short write instructions. Do not disconnect or interrupt programming. Follow the ignition-off prompt and wait as directed; the guide specifies at least 30 seconds after flashing.
  5. Check DME faults, confirm correct running and review suitable logs. If flashing fails, follow MHD's recovery instructions and support guidance.

A tuner can provide a compatible custom .bin or .mhd file for import; see custom tunes. MHD states that it cannot read and back up an existing third-party tune for arbitrary modification through its flash options; retain the original through the responsible tuner where applicable.

Stock, diagnostics and logs

Return to stock is distinct from an MHD Stage 0 map: check the guide for which software and features remain. MHD provides reading and clearing of supported DME fault codes and selected adaptation resets. Diagnose the cause before clearing a fault or resetting an adaptation.

Configurable gauges and data logs help assess parameters such as boost, load, temperatures and individual-cylinder ignition behaviour. Available channels and logging rates depend on DME, app and interface. Logs can be shared with the tuner; compare target and actual values and fuel pressure in context instead of treating a single value as proof of a healthy tune.

Flash options and MHD+

Depending on the engine, map and licence, flash options may include throttle response, idle, cooling, exhaust behaviour, torque or boost by gear and support for specified sensors or fuel hardware. Availability and suitability vary.

MHD+ Suite extends selected platforms with features such as multi-map switching, live adjustment and flex-fuel integration. The guide describes up to four maps on compatible setups; flex-fuel requires a supported ethanol sensor/kit, suitable fuel system, licence and calibration. Specific functions are tied to ECU software and tune, so confirm support for the actual car and installed equipment.

App screens and illustrated guides

The manufacturer's illustrated getting-started guide shows the account and app screens. The datalogging guide illustrates gauges and logging, while OTS maps illustrates map selection and flashing. Screen layout and available functions can change with app version and vehicle.

References

Revision 3: MHD Flasher

MHD Flasher is MHD Tuning's Android and iOS application for ECU flashing, diagnostics and monitoring on selected BMW and Toyota Supra platforms. Its features include off-the-shelf (OTS) and custom maps, gauges and logs, and platform-dependent MHD+ functions. Consult the MHD user guide and the manufacturer's supported-vehicle list before choosing a licence or connection.

Engine and vehicle coverage

Examples below are drawn from the vendor's May 2025 supported-vehicle list and subsequent app release notes. Engine-family coverage does not establish support for every chassis, model year, market, DME or software version. Confirm the VIN, ECU, unlock state and exact licence in the app or with MHD.

EngineManufacturer-listed examples and related references
N54Selected 135i, 335i, 535i, 335is, Z4 35i/35is, 1M and X6 35i. Related N54 controller labels include MSD80 and MSD81; identify the actual DME and software.
N55 and S55N55 E- and F-series products cover listed 135i/335i, M135i/M235i/M2, 435i and other listed saloon and X models. S55 listings include F80 M3, F82/F83 M4 and F87 M2 Competition. Relevant ECU family: Bosch MEVD17.
N13Listed F2x 114i/116i/118i and F3x 316i applications; check exact variant and ECU.
B58 and S58Selected F/G BMW models and B58 Toyota A90 Supra; S58 listings include F97/F98 X3 M/X4 M, G80 M3, G82/G83 M4 and G87 M2. See Bosch MG1 for the ECU family.
S63Listed F1x M5/M6, F85/F86 X5 M/X6 M and selected F90/F9x M applications. Product support and unlock requirements differ by generation.
B48 generation 2The 19 March 2025 v4.88 release notes announce custom-tune flashing, logging and MHD+ for Gen2 B48. They do not establish an OTS map for every B48 or support for B46. Older unsupported-vehicle lists predate this update; check the exact vehicle and current app.

Licences, interface and unlock

Install the correct MHD app and use a compatible Android or iOS device and OBD interface. The hardware guide distinguishes the universal Wi-Fi adapter, older E-series adapter, K+DCAN/OTG and ENET options by vehicle generation and mobile operating system; they are not interchangeable for every platform. Licences are associated with an account and VIN; features and bundles vary. Check current licence and transfer terms.

Run the vendor's unlock check before planning the job. Some DME/software combinations need an unlock before OBD tuning. The MHD Unlocker is a bench tool with a specifically defined supported scope; the manufacturer lists B58 Gen1/Gen2, S58 and S63 F90, including 2020+ DMEs, and excludes N55/S55. An active eligible MHD licence and a running vehicle are among its stated requirements. The appropriate solution depends on the identified ECU and software, not simply the model year.

Flash procedure

  1. Identify the car and DME, check for an unlock requirement, select the correct licence and interface, and address existing faults and mechanical issues.
  2. Use the OTS map guide to select the correct engine, hardware, fuel octane and transmission where requested. Map stages are product-specific, not universal performance specifications.
  3. Connect the interface, turn the ignition on with the engine off, use suitable battery support for the operation and switch off unnecessary electrical consumers. Keep the phone, interface and vehicle connection stable during the write.
  4. Select the map and compatible flash options; follow the app's full, long or short write instructions. Do not disconnect or interrupt programming. Follow the ignition-off prompt and wait as directed; the guide specifies at least 30 seconds after flashing.
  5. Check DME faults, confirm correct running and review suitable logs. If flashing fails, follow MHD's recovery instructions and support guidance.

A tuner can provide a compatible custom .bin or .mhd file for import; see custom tunes. MHD states that it cannot read and back up an existing third-party tune for arbitrary modification through its flash options; retain the original through the responsible tuner where applicable.

Stock, diagnostics and logs

Return to stock is distinct from an MHD Stage 0 map: check the guide for which software and features remain. MHD provides reading and clearing of supported DME fault codes and selected adaptation resets. Diagnose the cause before clearing a fault or resetting an adaptation.

Configurable gauges and data logs help assess parameters such as boost, load, temperatures and individual-cylinder ignition behaviour. Available channels and logging rates depend on DME, app and interface. Logs can be shared with the tuner; compare target and actual values and fuel pressure in context instead of treating a single value as proof of a healthy tune.

Flash options and MHD+

Depending on the engine, map and licence, flash options may include throttle response, idle, cooling, exhaust behaviour, torque or boost by gear and support for specified sensors or fuel hardware. Availability and suitability vary.

MHD+ Suite extends selected platforms with features such as multi-map switching, live adjustment and flex-fuel integration. The guide describes up to four maps on compatible setups; flex-fuel requires a supported ethanol sensor/kit, suitable fuel system, licence and calibration. Specific functions are tied to ECU software and tune, so confirm support for the actual car and installed equipment.

App screens and illustrated guides

The manufacturer's illustrated getting-started guide shows the account and app screens. The datalogging guide illustrates gauges and logging, while OTS maps illustrates map selection and flashing. Screen layout and available functions can change with app version and vehicle.

References