Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning Software
Parent
Section level
Applies to
Bosch MG1, Bosch MEVD17
Tool groups
Diagnostic tools, Flashing and tuning tools
Manufacturers
BMW, MINI, Toyota

bootmod3 by ProTuning Freaks is a cloud-connected ECU flash-tuning and monitoring platform for selected BMW F/G-series, MINI and Toyota GR Supra vehicles. It combines an app, a VIN-linked vehicle licence and an OBD connection. Functions, maps and unlock requirements vary by vehicle and software. See the bootmod3 user manual, version 3.1.1, February 2026 and manufacturer's setup guide.

Supported engines and ECUs

The manufacturer's engine groupings below describe product coverage, not a promise that every vehicle, DME software version or option is supported. Check the VIN, DME identification, unlock status and current application before purchase or flashing.

Engine or platformDocumented scope and related wiki pages
N13, N20/N26, N55 and S55The setup page lists these engine groups. Related pages: N13, N20, N26, N55 and S55 and Bosch MEVD17. The vendor's release notes identify MEVD-family applications; exact variant and chassis must be checked.
B46/B48, B58 and S58BMW, selected MINI and A90 Supra applications depending on engine and product. See B46/B48, B58/S58 and Bosch MG1.
N63 and S63Selected turbocharged V8 applications, dependent on generation and vehicle. See N63/S63; MEVD17 or MG1 varies with the application.

The vendor's MG1 tuning guide identifies B48 and B58 generation 1 and N63T2 as MG1 PPC; B48 and B58 generation 2, S58, N63T3 and S63T4 as MG1 Aurix. These are the guide's engine groups, not identification of every ECU model number or software variant. For N54 applications see MHD Flasher; do not assume a bootmod3 N54 licence from the engine name alone. bootmod3 release notes.

Hardware, account and licensing

The app runs on supported iOS, Android, Windows and macOS devices. A bootmod3 Wi-Fi OBD adapter enables wireless communication; an ENET connection and a laptop running the OBD Agent are another documented route. Register an account, connect to the vehicle and activate the purchased licence against its detected VIN. The licence and any included OTS map credits depend on the purchased product; check current terms and manual sections on vehicle registration, licences and transfer.

The vendor FAQ says maps must first be downloaded online; downloaded maps can subsequently be flashed offline. Online services are used for operations such as activation and obtaining or synchronising maps. The vehicle screen identifies the DME and software and indicates the required unlock, which may differ between otherwise similar cars.

Flashing workflow

  1. Identify the vehicle and DME, verify compatibility and unlock status and ensure the engine is mechanically healthy. Some software requires an unlock before OBD flashing; the method depends on the DME and software.
  2. Use a suitable stable battery supply, connect the approved interface, switch the ignition on with the engine off and close unnecessary consumers. Follow the app's instructions.
  3. Choose a stock, off-the-shelf (OTS) or custom map that matches engine, DME, fuel octane and installed hardware. Acquire/download the map and review its configuration.
  4. Start the flash, maintain power, ignition and the connection, and wait for the app's completion and ignition-cycle prompts. Do not interrupt a write. If it fails, follow the manual and vendor support process.
  5. Check faults and record logs under suitable conditions; resolve problems before further load or calibration changes.

The app provides a stock-tune flash function. Returning to a stock calibration is distinct from a guarantee that a vehicle's complete programming, modification history or warranty status is erased. Follow the instructions for the specific DME and licence.

Maps, diagnostics and logging

OTS maps are preconfigured for defined hardware and fuels; a tuner can supply custom maps. The app offers configurable dashboards, live channels, datalog recording and sharing, diagnostic functions and a map editor. Channel names, rates, available maps and options are platform and licence dependent. Log meaningful channels for the engine and compare requested and actual values, ignition corrections, fuel pressure and temperatures in context. The MG1 guide explains torque and load limits, boost, fuel and ignition tables; table definitions and values differ by ROM.

CustomROM and optional hardware

CustomROM adds features on selected supported engine and software combinations. Depending on the version and setup these can include live adjustments, map switching and integration with optional flex-fuel and REV2 hardware. OTS configuration can expose options such as exhaust behaviour, cooling, sensors, fuel-system hardware and torque by gear; an option shown in the general manual is not necessarily available or suitable for every car. See the CustomROM release information and current manual for actual platform limits and requirements.

The CustomROM release describes up to four map slots on supported setups and flex-fuel operation with compatible hardware. CustomROM V2 and REV2 can integrate supported external sensors and controls; consult the application-specific instructions. For logging setup and sharing see How to datalog with bootmod3.

References