Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning
Parent
Simos 18
Applies to
Simos 18.1
Tool groups
None
Manufacturers
Volkswagen Group

What is being switched?

Scope: These are documented or community-definition examples, not a universal map list for every Simos 18. Check the exact ECU, ASW, CAL, gearbox, patch and definition revision. Names, available functions, axis scaling, selectors and addresses vary. A calibration value or logger signal is not automatically a safe setting. None of the examples is a ready-made tune.

Some multi-map patches replicate selected maps or add per-slot modifiers in one ECU image. A selection changes the configured parameters; it is not necessarily a complete original-versus-tuned flash. A drive-mode button by itself does not establish that such a patch is present. The THANAS MQB description explicitly describes replicated calibration tables.

Switchleg S50 Switch Patch 29.33 V2: definition names

The pinned Switchleg1 S50 Switch Patch 29.33 V2 XDF is a patch-specific TunerPro definition titled SC8S50. Verify the exact ASW and matching patch before using it. Its five slot groups include the labels below. These are XDF display names supplied with that patch, not universal OEM Simos function identifiers. A title in an XDF does not alone prove the implementation or axes.

  • Torque Request AT Type 1/2/3; Torque Request MT Type 1/2: per-slot torque request groups as named in this XDF. Check gearbox selection and the actual request and limiting chain.
  • PUT setpoint: a per-slot pressure-related map labelled in hPa. The published XDF has generic axis descriptors, so confirm the patch's inputs and meaning rather than assuming it is a boost cap.
  • Spark modifier; Lambda modifier: per-slot modifiers. Confirm how and when each is applied in the corresponding patch documentation and log the result.
  • RPM limiter; Speed limiter; Pops enable: per-slot labels for limiter and sound selection.
  • Manual AFU: a manual ethanol-related value; the XDF description says changing this value does not by itself activate manual AFU.
  • Enable flex fuel spark/PUT/lambda/TQ/IAT/MPI modifier; Enable RAL; Enable NLS; Enable LC: feature-enable labels. Their presence in a definition does not prove a feature is activated in a given file.

The same XDF names a UI button selector for cruise cancel, cruise resume, variable-speed setpoint or pedals. These are definition labels, not a promise that every vehicle supports each input. Confirm the patch, input configuration and active slot. Displayed labels and map addresses must not be transferred to other patch revisions.

simos.app Main Patch: a different implementation

The simos.app Main Patch documentation describes two to five selectable slots. Its own labels include Torque Limit AT, Torque Limit MT, Torque Limit ECO, Boost limit by rpm and gear, Spark offset, Rev limit, Pops & bangs, Pops duration and Pops intensity. The boost limit is the lower of the OEM setpoint and the slot ceiling; it does not raise the OEM setpoint. The slot rev limit can lower the OEM limit. These are product-specific semantics, not the same thing as Switchleg's similarly named PUT setpoint.

The documented input options include configured cruise buttons, Start/Stop, ESC, a standstill indicator sequence and drive-mode association; availability and side effects depend on configuration. The vendor says its Start/Stop and ESC inputs retain their ordinary function. Its patch documentation requires a full flash to add or remove the patch and a calibration flash for later parameter edits; use the installed product's own instructions.

Other mode systems and fuel

EcuTek RaceROM for EA888 documents four switch modes and its own per-mode torque, boost, ignition and lambda features. Its three-button stalk procedure cannot switch while rolling. These controls are not interchangeable with another product's button mapping.

Manual fuel-map selection and sensor-based flex fuel are different. Confirm the fuel, active slot and actual ethanol source and blending configuration; selecting an ethanol-labelled slot does not measure fuel content.

Related: switchable maps · pops and bangs · crackle tuning · DSG shift sounds.

Launch and rolling anti-lag switches are implementation-specific. For the Main Patch and other examples, see the separate launch-control and rolling anti-lag guides, including their different gating and timeout behaviours.

Separate guides: traction control tuning · flat-foot shifting.

For the separate OEM and patch paths, see rev limiter tuning and vehicle-speed limiter tuning.

Source notes

Patch definition and supplier documentation reviewed 17 November 2026. Do not assume a listed label is present in every S50 revision or use generic XDF axis labels as proof of the underlying variables.