Tuning Wiki
Applies to

Check the hardware and software limits stated in this article.

What flat-foot shifting does

Flat-foot shifting (FFS), also called no-lift shifting (NLS), is a custom manual-transmission feature that manages engine speed during a clutch-operated gear change while the accelerator remains depressed. It is distinct from standing launch control, rolling anti-lag and DSG shift intervention. The cut method, torque and boost response depend on the installed implementation; FFS is not automatically present on every Simos 18.

The COBB MQB user guide describes manual applications including listed Mk7/Mk7.5 GTI, Mk7 Golf R, A7 GLI and 8V S3 vehicles. Check the exact ECU, gearbox, ROM, custom-feature version and calibration support; this list does not prove every market or Simos 18 variant has identical functions.

COBB custom-feature map and switch names

The COBB Volkswagen FFS tuning guide lists the following controls for its covered Mk7 GTI and Golf R calibrations. These are COBB display labels, not established factory A2L names:

  • Master Switch(FFS): feature enable. Check the installed definition and feature version.
  • Accelerator Pedal Position Min.: pedal threshold for entry. Wheel Speed Min.: minimum undriven-wheel speed for entry. The user guide also requires the clutch-operated shift; confirm input status and other version-specific gates.
  • Rev Limit: active FFS engine-speed limit looked up using Gear Current. The separate real-time Rev Limit can override the per-gear lookup. The Accessport user adjustment Flat Foot Shift Rev Limit applies one value across gears when it overrides the original per-gear limits.
  • Torque Target and Throttle Target: the guide describes configurable targets while FFS is active for its Mk7 GTI and Golf R example. They are not demonstrated as universal targets for other ECUs or patches.

COBB describes its listed off-the-shelf maps as having different limits by gear; the Accessport adjustment replaces them with one limit across gears and can remove those differences. Its older tuning guide says Accessport adjustments return to defaults after an extended key-off; persistence is firmware and feature dependent. Confirm the active limit on the installed setup. A selected limit is a control target, not proof of actual engine speed, and should be evaluated against clutch, gearbox and engine behaviour rather than copied from another vehicle.

Switch Patch example

The pinned Switchleg S50 Switch Patch 29.33 V2 definition includes the per-slot label Enable NLS. This is an XDF display name for that patch, not proof that NLS is installed or available in a particular file; identify the actual patch, activation conditions and configuration before relying on it. The switchable-maps guide covers the slot context.

Signals and diagnosis

Log engine rpm, accelerator and clutch-switch state, wheel/vehicle speed, current gear, boost, throttle, ignition, torque request and actual response as exposed by the matching system. COBB lists FFS Rev Limit as the active limit monitor and FFS State as a feature-state monitor. Compare the entry conditions with the selected target and actual rpm through entry and exit.

Monitor definition varies: one COBB MQB monitor list describes FFS State as a compound value with flags for disabled, speed ready, pedal ready, clutch ready, real-time override and active. An older monitor list describes it as a binary 0/1 state. Check the logger and feature version before decoding, rather than assuming either format applies universally.

The factory SC8 gearbox intervention reference describes ip_t_tq_gb_intv_down[2] and ip_t_tq_gb_intv_up[2] as gearbox-intervention recovery times indexed by transmission speed and gear. They are not established FFS rev-limit maps. Likewise, traction-control shift detection is a separate function: see traction control tuning.

FFS increases demands on the clutch, gearbox and engine. Verify the drivetrain and tune together and evaluate behaviour in a controlled setting; no universal shift limit, torque target or throttle setting follows from these names.

For normal engine-speed limit coordination and its difference from a shift-specific target, see rev limiter tuning.

For ratio-based gear recognition and clutch-input checks, see Simos 18 manual gear detection and clutch switch diagnosis.

Related: launch control · rolling anti-lag · switchable maps · traction control. References reviewed 17 November 2026.