Removed text is struck through; added text is highlighted.
The RM-Primis is a programmable wire-in standalone ECU from RM Racing Electronics. Its vehicle-specific packages combine this controller with a matching harness adapter and ECU cable. It uses the manufacturer’s RM-Tuner software.
RM-Primis ECU shown with a BMW kit adapter as a platform illustration. RM Racing Electronics product photograph, reproduced with permission.
Functions and capabilities
The manufacturer lists a built-in 400 kPa MAP sensor, VR/Hall trigger support, an optional universal loom, CAN communication, two knock channels and configurable outputs. It describes full sequential fuel and ignition for up to six cylinders and batch or wasted-spark modes for larger engines. Wideband sensors, drive-by-wire equipment and transmission compatibility depend on the selected package and installation.
RM-Tuner provides tuning and logging. The manufacturer lists closed- and open-loop boost and variable-cam control, launch control, anti-lag and configurable protection strategies. Availability depends on firmware, hardware and engine configuration.
Connector and wiring
Consult the RM-Primis documentation for the actual controller and adapter. The universal ECU's 64-way main header is drawn cavity by cavity, from the manufacturer's specifications and pinout booklet, on RM-Primis universal standalone ECU connector pinout. The booklet gives six injector and six ignition channels. Vehicle-adapter pinouts are not covered there. BMW, VAG and other plug-in adapters are specific to an engine and original ECU and must not be treated as interchangeable.Consult the RM-Primis documentation for the actual controller and adapter. A complete, verified cavity-by-cavity universal or vehicle-adapter schedule is not established on this page. BMW, VAG and other plug-in adapters are specific to an engine and original ECU and must not be treated as interchangeable.
Vehicle-specific BMW packages
RM-Primis BMW E36 M3 S50B32 MSS50RM-Primis BMW M52/S52 MS41RM-Primis BMW M42RM-Primis BMW M43RM-Primis BMW M44RM-Primis BMW M50/M50TURM-Primis BMW M52TU/M54 MS42/MS43/MS45RM-Primis BMW M60 V8
Open each version to inspect formatting, tables and photographs.
Revision 3: RM-Primis universal standalone ECU
The RM-Primis is a programmable wire-in standalone ECU from RM Racing Electronics. Its vehicle-specific packages combine this controller with a matching harness adapter and ECU cable. It uses the manufacturer’s RM-Tuner software.
The manufacturer lists a built-in 400 kPa MAP sensor, VR/Hall trigger support, an optional universal loom, CAN communication, two knock channels and configurable outputs. It describes full sequential fuel and ignition for up to six cylinders and batch or wasted-spark modes for larger engines. Wideband sensors, drive-by-wire equipment and transmission compatibility depend on the selected package and installation.
RM-Tuner provides tuning and logging. The manufacturer lists closed- and open-loop boost and variable-cam control, launch control, anti-lag and configurable protection strategies. Availability depends on firmware, hardware and engine configuration.
Connector and wiring
Consult the RM-Primis documentation for the actual controller and adapter. A complete, verified cavity-by-cavity universal or vehicle-adapter schedule is not established on this page. BMW, VAG and other plug-in adapters are specific to an engine and original ECU and must not be treated as interchangeable.
The RM-Primis is a programmable wire-in standalone ECU from RM Racing Electronics. Its vehicle-specific packages combine this controller with a matching harness adapter and ECU cable. It uses the manufacturer’s RM-Tuner software.
The manufacturer lists a built-in 400 kPa MAP sensor, VR/Hall trigger support, an optional universal loom, CAN communication, two knock channels and configurable outputs. It describes full sequential fuel and ignition for up to six cylinders and batch or wasted-spark modes for larger engines. Wideband sensors, drive-by-wire equipment and transmission compatibility depend on the selected package and installation.
RM-Tuner provides tuning and logging. The manufacturer lists closed- and open-loop boost and variable-cam control, launch control, anti-lag and configurable protection strategies. Availability depends on firmware, hardware and engine configuration.
Connector and wiring
Consult the RM-Primis documentation for the actual controller and adapter. The universal ECU's 64-way main header is drawn cavity by cavity, from the manufacturer's specifications and pinout booklet, on RM-Primis universal standalone ECU connector pinout. The booklet gives six injector and six ignition channels. Vehicle-adapter pinouts are not covered there. BMW, VAG and other plug-in adapters are specific to an engine and original ECU and must not be treated as interchangeable.