Tuning Wiki
Applies to

Check the hardware and software limits stated in this article.

RM-Primis VAG 1.8T Motronic M3.8 plug-in ECU is an application-specific RM Racing Electronics kit combining its RM-Primis standalone ECU with an adapter to selected original vehicle engine harnesses. Manufacturer product information.

RM-Primis VAG kit
RM Racing uses this image on both VAG kit listings; it is a family illustration and adapters differ. Manufacturer source, reproduced with permission.

Applications and compatibility

The manufacturer lists AGU, AEB, AJL and ANB 1.8T applications with Bosch Motronic M3.8.2, M3.8.4 or M3.8.5 engine management.

This cable-throttle-era package is distinct from the manufacturer’s ME7.1/ME7.5 adapter. The manufacturer lists VAG 1.8T examples including Golf GTI and Audi A4; verify engine code and ECU part number before treating a vehicle as compatible. Confirm the original ECU code, throttle, loom, immobiliser and CAN dependencies before ordering or wiring.

Control and wiring

RM-Tuner handles tuning and logging. The manufacturer lists 400 kPa MAP, CAN, six ignition and six injection channels, boost and variable-cam control, with electronic throttle and Bosch LSU wideband equipment dependent on selected options. The supplied kit includes the RM-Primis ECU and a VAG-specific adaptor; it is not simply a reflashed stock ECU.

A complete cavity-by-cavity ECU, adapter and original-vehicle pin schedule is not verified on the sales page. Obtain the exact kit documentation and use the RM-Primis documentation for the delivered hardware.

Reference

Manufacturer application and kit listing; RM-Primis platform.

RM-Primis plug-in adapter board headers

The RM Racing booklet, PDF page 12, labels the RM-Primis plug-in adapter’s left and right 32-position board headers looking straight at the board. The generic drawing does not identify this vehicle kit; confirm that the delivered adapter has the pictured headers and matching board revision with RM before using these tables. These are board-side connector positions, not the original vehicle’s loom or ECU connector cavity numbers. Vehicle-specific adapters can route or condition signals differently; consult the documentation for the supplied adapter and confirm the wiring before connecting devices.

Header 1 — left side of board

Board-header positionManufacturer function
1Injector output 1
2Injector output 2
3Injector output 3
4Injector output 4
5Injector output 5
6Injector output 6
7Ignition output 1
8Ignition output 2
9Ignition output 3
10Ignition output 4
11Ignition output 5
12Ignition output 6
13Fuel pump output
14Low-side GP 1
15Low-side GP 2
16Low-side GP 3
17Ground
18Ignition-switch input +12 V
19Permanent battery +12 V
20LSU IP
21LSU RCAL
22LSU VS/IP
23LSU VS
24LSU H+
25LSU H−
26Tachometer output
27High-side GP 4
28High-side GP 3
29High-side GP 2 push-pull
30High-side GP 1 push-pull
31Low-side GP 5
32Low-side GP 4

Header 2 — right side of board

Board-header positionManufacturer function
1Throttle position sensor input
2Coolant temperature sensor input
3Intake air temperature sensor input
4Digital / trigger input 1 (pull-up selectable)
5Digital / trigger input 2 (pull-up selectable)
6Digital / trigger Hall input (no pull-up)
7MAF / analogue voltage input
8Spare voltage input 1
9Spare voltage input 2
10Spare voltage input 3
11Spare voltage input 4
12Spare voltage input 5 (pedal 2 when DBW)
13Spare temperature input 1
14Spare temperature input 2 (pedal 1 when DBW)
15DBW TPS input 2
165 V output for sensors
17DBW motor +
18DBW motor −
19Ground
20Ground
21Ground
225 V output for sensors
23CAN low
24CAN high
25Knock sensor 2 −
26Knock sensor 2 + signal
27Knock sensor 1 −
28Knock sensor 1 + signal
29Variable-reluctance sensor 2 −
30Variable-reluctance sensor 2 +
31Variable-reluctance sensor 1 − (adjustable threshold)
32Variable-reluctance sensor 1 + (adjustable threshold)