Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Gearboxes
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 3 to revision 4

Removed text is struck through; added text is highlighted.

ZF 9HP is a family of nine-speed automatic transmissions for front-transverse powertrains. The family supports front-wheel-drive and all-wheel-drive configurations; it is distinct from the longitudinal ZF 8HP. ZF describes a modular design using planetary gearsets and hydraulically actuated dog clutches; see ZF's 9-speed product overview and its passenger-car transmission brochure.

ZF 9HP transmission, shown as a family example. Image: ZF Friedrichshafen AG; permission to republish confirmed by the user. The photo does not establish a specific vehicle, controller or suffix.

Types, naming and identification

The following are source-documented examples, not a complete vehicle application list. ZF's 2017 brochure shows 9HP28, 9HP48 and 9HP50 as different sizes; its earlier engineering article described 9HP28 as planned at the time. That development reference alone does not establish a particular production vehicle or interchangeability. Confirm the exact transmission and OE parts-list numbers.

DesignationDocumented distinction or exampleIdentification notes 9HP28ZF's brochure shows it as a separate, smaller family size.Do not assume 9HP48 service parts or an application solely from the name. 9HP48 / 948TEStellantis identifies the 2016 Chrysler 200 transmission as 948TE / 9HP48, with FWD or AWD vehicle examples.Vehicle software, selector, bellhousing and driveline are application-specific; the designations do not promise interchangeability. 9HP48QZF's 2026 remanufactured transmission catalogue lists separate Chrysler and Honda entries with different parts and software numbers.Match the complete suffix and catalogue number; the table does not identify all vehicle variants. 9HP48QX / QXR / QLThe same ZF catalogue lists 9HP48QX examples for Chrysler and Jaguar Land Rover, QXR for Chrysler and QL for Daimler.Record the actual complete marking rather than treating the suffix as decorative. 9HP50 / 9HP50QXZF describes the later 9HP50 size in its brochure and lists 9HP50QX JLR remanufactured examples in the 2026 catalogue.Same family does not establish that a 9HP48 unit, valve body or controller will fit or run.

Record the complete transmission label, ZF parts-list/specification and serial numbers, OE assembly and controller part numbers, donor VIN, market, model year, engine, driven axles and selector/park arrangement. ZF's catalogue distinguishes assemblies supplied with and without software. A shared casing, gearbox label or similar plug cannot establish software, immobiliser, electronic, mechanical or calibration compatibility.

Gear ratios: a documented 948TE example

The 2022 Jeep Compass specifications list these ratios for the 2.4-litre Tigershark 4x4 948TE. Reverse is shown as a positive magnitude. This example is not a guarantee for all 9HP variants or markets; final drive and tyre size must also be checked.

GearRatio14.7122.8431.9141.3851.0060.8170.7080.5890.48Reverse3.81

Individual 9HP controller guides

FCA 948TE / ZF 9HP controllerZF ES11-1029 — FCA 9HP controller exampleHonda and Acura ZF 9HP controllerJaguar Land Rover ZF 9HP48 controllerLand Rover LR125943 9HP50 controllerFCA 948TE / ZF 9HP controllerHonda and Acura ZF 9HP controllerJaguar Land Rover ZF 9HP48 controllerLand Rover LR125943 9HP50 controller

The guides distinguish a controller part number from its gearbox application. Check each pinout's stated scope: sources differ and do not establish a universal 9HP connector assignment.

Control and replacement checks

In the 2016 Chrysler 200 948TE example, FCA describes integrated electrohydraulic controls. It does not follow that every 9HP has the same TCM, connector, pinout or module location. Obtain the actual vehicle and TCM identifiers, wiring diagram, connector orientation and programming procedure. Keep the existing identification and configuration available for the authorised repair.

Sonnax's valve-body identification guide distinguishes park-by-wire from park-by-cable 948TE valve bodies, with different solenoid arrangements, and says they are not interchangeable. Its guide describes Honda applications in the park-by-wire group; confirm the exact gearbox and supplier parts information rather than applying it to all 9HPs.

For particular FCA 948TE vehicles, service bulletin 21-013-16 Rev B describes scan-tool quick learning after certain transmission work and a separate valve-body/solenoid learn after a valve-body or TCM replacement. Later campaign ZD3 has its own limits for complete replacement. These documents are vehicle- and procedure-specific: consult the current OE instructions for the exact repair rather than resetting learned values indiscriminately.

Factory TCM programming and calibration tools

Examples below describe selected applications; confirm the exact TCM hardware and software, vehicle, protocol, licence, connection and recovery procedure with the tool supplier. Reading/writing a file, adapting a replacement and editing a calibration are distinct functions.

Magicmotorsport FLEX: the 9HP48 TC1782F announcement documents bench flash and EEPROM access for selected Jaguar/Land Rover vehicles. The maker's separate duplication list reports no solution for certain JLR/FCA 9HP entries; resolve that discrepancy for the exact unit with the supplier before assuming a replacement can be cloned. PCMflash: its release notes describe module 81 Jaguar/Land Rover 9HP48 OBD support and module 96 direct-connector service mode for specified ZF units, including Honda 9HP48. The module 96 connection guide includes a 9HP48/50 diagram. Some published JLR diagrams conflict on CAN-low position; see the specific controller articles and confirm with the vendor. Alientech KESS3: an Alientech distributor's protocol announcement lists selected Bosch ZF 9HP applications using boot access. Check the current manufacturer vehicle/protocol list and hardware, rather than assuming every unit is covered. Microtronik HexProg II: the manufacturer's HPP20 controller list lists ZF 9HP and Bosch ES11-10xx TC1782 entries for selected manufacturers. Verify the exact supported operation, interface and version; a family listing does not guarantee a particular part number or calibration.

Fluid and servicing

Use the vehicle maker's approved fluid and precise fill, temperature and level procedure for the identified transmission. ZF's TE-ML 11 lubricant list includes multiple 9HP48 and 9HP50 types, approved fluid references and vehicle-maker part numbers; confirm the current list and application. Do not select fluid solely because it was used in another nine-speed transmission.

Workshop and community references

Transmission-repair organisation ATRA's 948TE/9HP48 introduction presents identification, internal layout and FCA service context for its documented applications. It is a workshop learning resource, not a substitute for the exact vehicle service data.

In a Diagnostic Network discussion, a technician asks about programming a used TCM for a 2015 Evoque 9HP48; replies propose approaches but the discussion is marked unsolved. It demonstrates a replacement-matching question, not a verified programming recipe. Verify the transmission/TCM part number and manufacturer procedure for the specific vehicle.

Related: ZF gearbox and transmission-control overview and ZF 8HP gearbox types. Sources reviewed 17 November 2026.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: ZF 9HP gearbox types

ZF 9HP is a family of nine-speed automatic transmissions for front-transverse powertrains. The family supports front-wheel-drive and all-wheel-drive configurations; it is distinct from the longitudinal ZF 8HP. ZF describes a modular design using planetary gearsets and hydraulically actuated dog clutches; see ZF's 9-speed product overview and its passenger-car transmission brochure.

ZF 9HP nine-speed automatic transmission
ZF 9HP transmission, shown as a family example. Image: ZF Friedrichshafen AG; permission to republish confirmed by the user. The photo does not establish a specific vehicle, controller or suffix.

Types, naming and identification

The following are source-documented examples, not a complete vehicle application list. ZF's 2017 brochure shows 9HP28, 9HP48 and 9HP50 as different sizes; its earlier engineering article described 9HP28 as planned at the time. That development reference alone does not establish a particular production vehicle or interchangeability. Confirm the exact transmission and OE parts-list numbers.

DesignationDocumented distinction or exampleIdentification notes
9HP28ZF's brochure shows it as a separate, smaller family size.Do not assume 9HP48 service parts or an application solely from the name.
9HP48 / 948TEStellantis identifies the 2016 Chrysler 200 transmission as 948TE / 9HP48, with FWD or AWD vehicle examples.Vehicle software, selector, bellhousing and driveline are application-specific; the designations do not promise interchangeability.
9HP48QZF's 2026 remanufactured transmission catalogue lists separate Chrysler and Honda entries with different parts and software numbers.Match the complete suffix and catalogue number; the table does not identify all vehicle variants.
9HP48QX / QXR / QLThe same ZF catalogue lists 9HP48QX examples for Chrysler and Jaguar Land Rover, QXR for Chrysler and QL for Daimler.Record the actual complete marking rather than treating the suffix as decorative.
9HP50 / 9HP50QXZF describes the later 9HP50 size in its brochure and lists 9HP50QX JLR remanufactured examples in the 2026 catalogue.Same family does not establish that a 9HP48 unit, valve body or controller will fit or run.

Record the complete transmission label, ZF parts-list/specification and serial numbers, OE assembly and controller part numbers, donor VIN, market, model year, engine, driven axles and selector/park arrangement. ZF's catalogue distinguishes assemblies supplied with and without software. A shared casing, gearbox label or similar plug cannot establish software, immobiliser, electronic, mechanical or calibration compatibility.

Gear ratios: a documented 948TE example

The 2022 Jeep Compass specifications list these ratios for the 2.4-litre Tigershark 4x4 948TE. Reverse is shown as a positive magnitude. This example is not a guarantee for all 9HP variants or markets; final drive and tyre size must also be checked.

GearRatio
14.71
22.84
31.91
41.38
51.00
60.81
70.70
80.58
90.48
Reverse3.81

Individual 9HP controller guides

The guides distinguish a controller part number from its gearbox application. Check each pinout's stated scope: sources differ and do not establish a universal 9HP connector assignment.

Control and replacement checks

In the 2016 Chrysler 200 948TE example, FCA describes integrated electrohydraulic controls. It does not follow that every 9HP has the same TCM, connector, pinout or module location. Obtain the actual vehicle and TCM identifiers, wiring diagram, connector orientation and programming procedure. Keep the existing identification and configuration available for the authorised repair.

Sonnax's valve-body identification guide distinguishes park-by-wire from park-by-cable 948TE valve bodies, with different solenoid arrangements, and says they are not interchangeable. Its guide describes Honda applications in the park-by-wire group; confirm the exact gearbox and supplier parts information rather than applying it to all 9HPs.

For particular FCA 948TE vehicles, service bulletin 21-013-16 Rev B describes scan-tool quick learning after certain transmission work and a separate valve-body/solenoid learn after a valve-body or TCM replacement. Later campaign ZD3 has its own limits for complete replacement. These documents are vehicle- and procedure-specific: consult the current OE instructions for the exact repair rather than resetting learned values indiscriminately.

Factory TCM programming and calibration tools

Examples below describe selected applications; confirm the exact TCM hardware and software, vehicle, protocol, licence, connection and recovery procedure with the tool supplier. Reading/writing a file, adapting a replacement and editing a calibration are distinct functions.

  • Magicmotorsport FLEX: the 9HP48 TC1782F announcement documents bench flash and EEPROM access for selected Jaguar/Land Rover vehicles. The maker's separate duplication list reports no solution for certain JLR/FCA 9HP entries; resolve that discrepancy for the exact unit with the supplier before assuming a replacement can be cloned.
  • PCMflash: its release notes describe module 81 Jaguar/Land Rover 9HP48 OBD support and module 96 direct-connector service mode for specified ZF units, including Honda 9HP48. The module 96 connection guide includes a 9HP48/50 diagram. Some published JLR diagrams conflict on CAN-low position; see the specific controller articles and confirm with the vendor.
  • Alientech KESS3: an Alientech distributor's protocol announcement lists selected Bosch ZF 9HP applications using boot access. Check the current manufacturer vehicle/protocol list and hardware, rather than assuming every unit is covered.
  • Microtronik HexProg II: the manufacturer's HPP20 controller list lists ZF 9HP and Bosch ES11-10xx TC1782 entries for selected manufacturers. Verify the exact supported operation, interface and version; a family listing does not guarantee a particular part number or calibration.

Fluid and servicing

Use the vehicle maker's approved fluid and precise fill, temperature and level procedure for the identified transmission. ZF's TE-ML 11 lubricant list includes multiple 9HP48 and 9HP50 types, approved fluid references and vehicle-maker part numbers; confirm the current list and application. Do not select fluid solely because it was used in another nine-speed transmission.

Workshop and community references

Transmission-repair organisation ATRA's 948TE/9HP48 introduction presents identification, internal layout and FCA service context for its documented applications. It is a workshop learning resource, not a substitute for the exact vehicle service data.

In a Diagnostic Network discussion, a technician asks about programming a used TCM for a 2015 Evoque 9HP48; replies propose approaches but the discussion is marked unsolved. It demonstrates a replacement-matching question, not a verified programming recipe. Verify the transmission/TCM part number and manufacturer procedure for the specific vehicle.

Related: ZF gearbox and transmission-control overview and ZF 8HP gearbox types. Sources reviewed 17 November 2026.

Revision 4: ZF 9HP gearbox types

ZF 9HP is a family of nine-speed automatic transmissions for front-transverse powertrains. The family supports front-wheel-drive and all-wheel-drive configurations; it is distinct from the longitudinal ZF 8HP. ZF describes a modular design using planetary gearsets and hydraulically actuated dog clutches; see ZF's 9-speed product overview and its passenger-car transmission brochure.

ZF 9HP nine-speed automatic transmission
ZF 9HP transmission, shown as a family example. Image: ZF Friedrichshafen AG; permission to republish confirmed by the user. The photo does not establish a specific vehicle, controller or suffix.

Types, naming and identification

The following are source-documented examples, not a complete vehicle application list. ZF's 2017 brochure shows 9HP28, 9HP48 and 9HP50 as different sizes; its earlier engineering article described 9HP28 as planned at the time. That development reference alone does not establish a particular production vehicle or interchangeability. Confirm the exact transmission and OE parts-list numbers.

DesignationDocumented distinction or exampleIdentification notes
9HP28ZF's brochure shows it as a separate, smaller family size.Do not assume 9HP48 service parts or an application solely from the name.
9HP48 / 948TEStellantis identifies the 2016 Chrysler 200 transmission as 948TE / 9HP48, with FWD or AWD vehicle examples.Vehicle software, selector, bellhousing and driveline are application-specific; the designations do not promise interchangeability.
9HP48QZF's 2026 remanufactured transmission catalogue lists separate Chrysler and Honda entries with different parts and software numbers.Match the complete suffix and catalogue number; the table does not identify all vehicle variants.
9HP48QX / QXR / QLThe same ZF catalogue lists 9HP48QX examples for Chrysler and Jaguar Land Rover, QXR for Chrysler and QL for Daimler.Record the actual complete marking rather than treating the suffix as decorative.
9HP50 / 9HP50QXZF describes the later 9HP50 size in its brochure and lists 9HP50QX JLR remanufactured examples in the 2026 catalogue.Same family does not establish that a 9HP48 unit, valve body or controller will fit or run.

Record the complete transmission label, ZF parts-list/specification and serial numbers, OE assembly and controller part numbers, donor VIN, market, model year, engine, driven axles and selector/park arrangement. ZF's catalogue distinguishes assemblies supplied with and without software. A shared casing, gearbox label or similar plug cannot establish software, immobiliser, electronic, mechanical or calibration compatibility.

Gear ratios: a documented 948TE example

The 2022 Jeep Compass specifications list these ratios for the 2.4-litre Tigershark 4x4 948TE. Reverse is shown as a positive magnitude. This example is not a guarantee for all 9HP variants or markets; final drive and tyre size must also be checked.

GearRatio
14.71
22.84
31.91
41.38
51.00
60.81
70.70
80.58
90.48
Reverse3.81

Individual 9HP controller guides

The guides distinguish a controller part number from its gearbox application. Check each pinout's stated scope: sources differ and do not establish a universal 9HP connector assignment.

Control and replacement checks

In the 2016 Chrysler 200 948TE example, FCA describes integrated electrohydraulic controls. It does not follow that every 9HP has the same TCM, connector, pinout or module location. Obtain the actual vehicle and TCM identifiers, wiring diagram, connector orientation and programming procedure. Keep the existing identification and configuration available for the authorised repair.

Sonnax's valve-body identification guide distinguishes park-by-wire from park-by-cable 948TE valve bodies, with different solenoid arrangements, and says they are not interchangeable. Its guide describes Honda applications in the park-by-wire group; confirm the exact gearbox and supplier parts information rather than applying it to all 9HPs.

For particular FCA 948TE vehicles, service bulletin 21-013-16 Rev B describes scan-tool quick learning after certain transmission work and a separate valve-body/solenoid learn after a valve-body or TCM replacement. Later campaign ZD3 has its own limits for complete replacement. These documents are vehicle- and procedure-specific: consult the current OE instructions for the exact repair rather than resetting learned values indiscriminately.

Factory TCM programming and calibration tools

Examples below describe selected applications; confirm the exact TCM hardware and software, vehicle, protocol, licence, connection and recovery procedure with the tool supplier. Reading/writing a file, adapting a replacement and editing a calibration are distinct functions.

  • Magicmotorsport FLEX: the 9HP48 TC1782F announcement documents bench flash and EEPROM access for selected Jaguar/Land Rover vehicles. The maker's separate duplication list reports no solution for certain JLR/FCA 9HP entries; resolve that discrepancy for the exact unit with the supplier before assuming a replacement can be cloned.
  • PCMflash: its release notes describe module 81 Jaguar/Land Rover 9HP48 OBD support and module 96 direct-connector service mode for specified ZF units, including Honda 9HP48. The module 96 connection guide includes a 9HP48/50 diagram. Some published JLR diagrams conflict on CAN-low position; see the specific controller articles and confirm with the vendor.
  • Alientech KESS3: an Alientech distributor's protocol announcement lists selected Bosch ZF 9HP applications using boot access. Check the current manufacturer vehicle/protocol list and hardware, rather than assuming every unit is covered.
  • Microtronik HexProg II: the manufacturer's HPP20 controller list lists ZF 9HP and Bosch ES11-10xx TC1782 entries for selected manufacturers. Verify the exact supported operation, interface and version; a family listing does not guarantee a particular part number or calibration.

Fluid and servicing

Use the vehicle maker's approved fluid and precise fill, temperature and level procedure for the identified transmission. ZF's TE-ML 11 lubricant list includes multiple 9HP48 and 9HP50 types, approved fluid references and vehicle-maker part numbers; confirm the current list and application. Do not select fluid solely because it was used in another nine-speed transmission.

Workshop and community references

Transmission-repair organisation ATRA's 948TE/9HP48 introduction presents identification, internal layout and FCA service context for its documented applications. It is a workshop learning resource, not a substitute for the exact vehicle service data.

In a Diagnostic Network discussion, a technician asks about programming a used TCM for a 2015 Evoque 9HP48; replies propose approaches but the discussion is marked unsolved. It demonstrates a replacement-matching question, not a verified programming recipe. Verify the transmission/TCM part number and manufacturer procedure for the specific vehicle.

Related: ZF gearbox and transmission-control overview and ZF 8HP gearbox types. Sources reviewed 17 November 2026.