What “ZF8” identifies
ZF 8HP is a family of eight-speed automatic transmissions, not one interchangeable gearbox. The complete type and suffix, ZF specification number, donor vehicle and control system matter when selecting a transmission or parts. ZF’s transmission identification charts and remanufactured transmission catalogue distinguish the type, specification and serial number, and list multiple variants of 8HP45, 8HP55, 8HP70 and 8HP90. A shared family name does not establish interchangeability.
Examples of gearbox types
The following examples are recorded in ZF’s 8HP oil-change kit service information 50130, November 2024. Manufacturer examples identify a listing in that document; they do not mean that every model from that manufacturer uses the gearbox.
| Type or group | Examples of source-listed applications | Distinction |
|---|---|---|
| 8HP45, 8HP45 X, 8HP45 X HIS | BMW, Chrysler, Jaguar / Land Rover and Volkswagen entries | ZF lists multiple suffixes separately; record the complete marking. |
| 8HP50 / X | BMW | BMW identifies 8HP50 as an updated 8HP45 in its G12 training material. |
| 8HP51 HIS / X HIS | BMW; Jaguar for X HIS | Different source-listed designations from 8HP50; verify the complete part number. |
| 8HP55 A, 8HP55 FL HIS, 8HP55 AH | Audi | ZF lists A, FL and AH separately; do not treat the suffixes as cosmetic. |
| 8HP65 A / A HIS | Audi; Volkswagen, Bentley and Porsche for A HIS | ZF lists the 8HP65 A and A HIS as separate types. |
| 8HP70, 8HP70 X and HIS variants | BMW, Chrysler, Jaguar / Land Rover, Maserati | The same basic family appears with several suffixes and applications. |
| 8HP75 / X and 8HP76 HIS / X HIS | BMW; Jaguar / Land Rover for 8HP76 X HIS | BMW identifies 8HP75 as an update of 8HP70 in its G12 training material. |
| 8HP90, 8HP90 A, 8HP90 A74 | BMW, Chrysler and Aston Martin for 8HP90; Audi / Bentley for A variants | ZF lists both base and A-family forms. Match the exact application and part number. |
| 8HP95 A, AX and AX PH | Audi, Volkswagen, Bentley and Lamborghini for A; Porsche for AX and AX PH | ZF separately lists the AX PH variant in the oil-kit service information. |
| 8P75 PH / X PH | BMW; Jeep for 8P75PH | Electrified variants are listed separately in ZF’s service document; use their specific service procedure. |
This is a selection, not a complete application or generation list. Spacing in suffixes follows the source where useful. Do not infer a guaranteed torque capacity or tuned durability from the digits in a model name: obtain the rating and operating limits for the exact transmission and application.
Gear ratios: a documented BMW comparison
BMW’s G12 Complete Vehicle training manual, powertrain section 7.4 compares 8HP45/70/90 with the updated 8HP50 and 8HP75/95. Ratios below are those in that BMW document, not a promise for every manufacturer’s variant. Positive figures for reverse are ratio magnitudes.
| Gear | 8HP45 | 8HP70 / 90 | 8HP50 | 8HP75 / 95 |
|---|---|---|---|---|
| 1 | 4.714 | 4.714 | 5.000 | 5.000 |
| 2 | 3.143 | 3.143 | 3.200 | 3.200 |
| 3 | 2.106 | 2.106 | 2.143 | 2.143 |
| 4 | 1.667 | 1.667 | 1.720 | 1.720 |
| 5 | 1.285 | 1.285 | 1.314 | 1.313 |
| 6 | 1.000 | 1.000 | 1.000 | 1.000 |
| 7 | 0.839 | 0.839 | 0.822 | 0.823 |
| 8 | 0.667 | 0.667 | 0.640 | 0.640 |
| Reverse | 3.295 | 3.317 | 3.456 | 3.478 |
For a swap, calculate overall ratio with the actual final drive and road speed with the actual tyre size and verify the gearbox’s own specification. Gear ratios alone do not establish case, converter, output, mechatronic or software compatibility.
Identify before buying, swapping or servicing
- Record the full plate type, ZF specification or parts-list number and serial number, and OE part number if present. Record donor make, model, year, engine and drivetrain. The ZF identification charts illustrate the information used in its catalogue.
- Check bellhousing and engine interface, torque converter, output and driveline arrangement, mounting, cooling connections, selector and park arrangement against the actual donor and recipient.
- Identify the mechatronic assembly and controller hardware and software separately. ZF’s 2026 8HP mechatronic service information says kit selection must follow the mechatronic part number; transmission family is only an additional aid.
- Use the vehicle and gearbox-specific fluid, fill and temperature procedure, pan, filter and fasteners. ZF’s oil kit guidance distinguishes transmission types and states that oil changes on its marked hybrid variants must be performed by a trained high-voltage expert.
Later and electrified versions
ZF describes the fourth-generation 8HP as a modular family for combustion-engine, mild-hybrid and plug-in-hybrid applications. ZF reports that Gen4 industrialisation began in 2022; the presence of 8HP in a name alone is not enough to identify the generation or hybrid configuration. See ZF’s Gen4 overview and plug-in hybrid transmission description.
For factory transmission-control calibration tools and controller information, see ZF 8HP gearbox controllers. See also ZF gearboxes and transmission control, the ZF 8HP catalogue record, and ZF 6HP and 8HP transmission tuning and swap diagnosis. Sources reviewed 17 November 2026.