ZF 9HP is a family of nine-speed automatic transmissions for front-transverse powertrains. The family supports front-wheel-drive and all-wheel-drive configurations; it is distinct from the longitudinal ZF 8HP. ZF describes a modular design using planetary gearsets and hydraulically actuated dog clutches; see ZF's 9-speed product overview and its passenger-car transmission brochure.

Types, naming and identification
The following are source-documented examples, not a complete vehicle application list. ZF's 2017 brochure shows 9HP28, 9HP48 and 9HP50 as different sizes; its earlier engineering article described 9HP28 as planned at the time. That development reference alone does not establish a particular production vehicle or interchangeability. Confirm the exact transmission and OE parts-list numbers.
| Designation | Documented distinction or example | Identification notes |
|---|---|---|
| 9HP28 | ZF's brochure shows it as a separate, smaller family size. | Do not assume 9HP48 service parts or an application solely from the name. |
| 9HP48 / 948TE | Stellantis identifies the 2016 Chrysler 200 transmission as 948TE / 9HP48, with FWD or AWD vehicle examples. | Vehicle software, selector, bellhousing and driveline are application-specific; the designations do not promise interchangeability. |
| 9HP48Q | ZF's 2026 remanufactured transmission catalogue lists separate Chrysler and Honda entries with different parts and software numbers. | Match the complete suffix and catalogue number; the table does not identify all vehicle variants. |
| 9HP48QX / QXR / QL | The same ZF catalogue lists 9HP48QX examples for Chrysler and Jaguar Land Rover, QXR for Chrysler and QL for Daimler. | Record the actual complete marking rather than treating the suffix as decorative. |
| 9HP50 / 9HP50QX | ZF describes the later 9HP50 size in its brochure and lists 9HP50QX JLR remanufactured examples in the 2026 catalogue. | Same family does not establish that a 9HP48 unit, valve body or controller will fit or run. |
Record the complete transmission label, ZF parts-list/specification and serial numbers, OE assembly and controller part numbers, donor VIN, market, model year, engine, driven axles and selector/park arrangement. ZF's catalogue distinguishes assemblies supplied with and without software. A shared casing, gearbox label or similar plug cannot establish software, immobiliser, electronic, mechanical or calibration compatibility.
Gear ratios: a documented 948TE example
The 2022 Jeep Compass specifications list these ratios for the 2.4-litre Tigershark 4x4 948TE. Reverse is shown as a positive magnitude. This example is not a guarantee for all 9HP variants or markets; final drive and tyre size must also be checked.
| Gear | Ratio |
|---|---|
| 1 | 4.71 |
| 2 | 2.84 |
| 3 | 1.91 |
| 4 | 1.38 |
| 5 | 1.00 |
| 6 | 0.81 |
| 7 | 0.70 |
| 8 | 0.58 |
| 9 | 0.48 |
| Reverse | 3.81 |
Individual 9HP controller guides
- FCA 948TE / ZF 9HP controller
- Honda and Acura ZF 9HP controller
- Jaguar Land Rover ZF 9HP48 controller
- Land Rover LR125943 9HP50 controller
The guides distinguish a controller part number from its gearbox application. Check each pinout's stated scope: sources differ and do not establish a universal 9HP connector assignment.
Control and replacement checks
In the 2016 Chrysler 200 948TE example, FCA describes integrated electrohydraulic controls. It does not follow that every 9HP has the same TCM, connector, pinout or module location. Obtain the actual vehicle and TCM identifiers, wiring diagram, connector orientation and programming procedure. Keep the existing identification and configuration available for the authorised repair.
Sonnax's valve-body identification guide distinguishes park-by-wire from park-by-cable 948TE valve bodies, with different solenoid arrangements, and says they are not interchangeable. Its guide describes Honda applications in the park-by-wire group; confirm the exact gearbox and supplier parts information rather than applying it to all 9HPs.
For particular FCA 948TE vehicles, service bulletin 21-013-16 Rev B describes scan-tool quick learning after certain transmission work and a separate valve-body/solenoid learn after a valve-body or TCM replacement. Later campaign ZD3 has its own limits for complete replacement. These documents are vehicle- and procedure-specific: consult the current OE instructions for the exact repair rather than resetting learned values indiscriminately.
Fluid and servicing
Use the vehicle maker's approved fluid and precise fill, temperature and level procedure for the identified transmission. ZF's TE-ML 11 lubricant list includes multiple 9HP48 and 9HP50 types, approved fluid references and vehicle-maker part numbers; confirm the current list and application. Do not select fluid solely because it was used in another nine-speed transmission.
Workshop and community references
Transmission-repair organisation ATRA's 948TE/9HP48 introduction presents identification, internal layout and FCA service context for its documented applications. It is a workshop learning resource, not a substitute for the exact vehicle service data.
In a Diagnostic Network discussion, a technician asks about programming a used TCM for a 2015 Evoque 9HP48; replies propose approaches but the discussion is marked unsolved. It demonstrates a replacement-matching question, not a verified programming recipe. Verify the transmission/TCM part number and manufacturer procedure for the specific vehicle.
Related: ZF gearbox and transmission-control overview and ZF 8HP gearbox types. Sources reviewed 17 November 2026.