Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
RM Racing Electronics standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

The RM-Primis is a programmable wire-in standalone ECU from RM Racing Electronics. Its vehicle-specific packages combine this controller with a matching harness adapter and ECU cable. It uses the manufacturer’s RM-Tuner software.

RM-Primis ECU and BMW adapter
RM-Primis ECU shown with a BMW kit adapter as a platform illustration. RM Racing Electronics product photograph, reproduced with permission.

Functions and capabilities

The manufacturer lists a built-in 400 kPa MAP sensor, VR/Hall trigger support, an optional universal loom, CAN communication, two knock channels and configurable outputs. It describes full sequential fuel and ignition for up to six cylinders and batch or wasted-spark modes for larger engines. Wideband sensors, drive-by-wire equipment and transmission compatibility depend on the selected package and installation.

RM-Tuner provides tuning and logging. The manufacturer lists closed- and open-loop boost and variable-cam control, launch control, anti-lag and configurable protection strategies. Availability depends on firmware, hardware and engine configuration.

Connector and wiring

Consult the RM-Primis documentation for the actual controller and adapter. The universal ECU's 64-way main header is drawn cavity by cavity, from the manufacturer's specifications and pinout booklet, on RM-Primis universal standalone ECU connector pinout. The booklet gives six injector and six ignition channels. Vehicle-adapter pinouts are not covered there. BMW, VAG and other plug-in adapters are specific to an engine and original ECU and must not be treated as interchangeable.

Vehicle-specific BMW packages

VAG application packages