Tuning Wiki

Yanhua Mini ACDP is a small programming master sold with optional vehicle modules. For BMW, the maker's shop sells separate modules and clip-on interface boards for immobiliser, DME and gearbox jobs, used from a computer or a phone. A later master, ACDP-2, is sold with USB and a wireless connection. The basic master is required before any add-on module. This is not BMW ISTA or ICOM. [1] [2]

Yanhua Mini ACDP master, key adapter, interface board, case and leads
Mini ACDP kit published by the Yanhua ACDP shop: master, key adapter, OBP/ICP board, case and leads. © the operator of yanhuaacdp.com. Reproduced for identification and review, with acknowledgement. Source: Mini ACDP basic module, accessed 11 November 2026.

How the kits are split

The shop's BMW guide lists functions as separate modules. Buying one module does not enable the others. The same guide says the basic module is necessary for every add-on. Connection method depends on the job: the shop describes OBD, bench and in-circuit clip connection, and says the clip boards are intended to avoid soldering. That is the seller's description of the hardware, not a procedure, and it does not apply to every control unit. [1] [3]

Shop moduleBMW use described by the shop
Basic masterRequired interface. The brand guide also associates it with in-circuit and adapter-board programming of common serial EEPROMs.
Module 1, CASCAS1 to CAS4+ key programming and module replacement by OBD or in-circuit connection, as listed.
Module 2, FEM/BDCFEM/BDC key programming and module replacement.
Module 3, DME ISNDME ISN read and write, and DME cloning where a separate clone licence is purchased. The shop says this module is needed for some all-keys-lost work.
Module 8, FRMFootwell-module repair, listed as requiring the CAS module as well.
Modules 11, 19 and 36, and related gearbox licencesRefresh or clone of listed ZF and dual-clutch gearboxes. The control unit and method differ by module.
Module 27ISN and clone functions for listed MSV80, MSD8x and MSV90 DME units.
Module 31F-chassis BDC immobiliser work via OBD, as a separate licence.
Module 38 and later boardsListed for G-series BDC2 key work, with an extra all-keys-lost licence. A BDC3 board is listed as an accessory used with module 38.

The shop also lists instrument and mileage modules. Those operations are not described here. See mileage programmers for the UK position on an inaccurate recorded mileage.

What to confirm before a job

Confirm the chassis, the control-unit part and the purchased module and licence. ACDP is often used on the bench with a dedicated board; an OBD claim for one CAS version does not extend to the next. Save data the software offers to save, and use a stable supply. Key work requires authority to work on the vehicle. Yanhua Digimaster is a different Yanhua product line and is not this master.

Related pages

Specialist BMW diagnostic tools · BMW Explorer · Autohex II for BMW · CGDI BMW · VVDI BIMTool Pro

Sources

Shop pages accessed 11 November 2026. The module list is the seller's catalogue, not a test by this wiki.