The EA888 Evo4, also called EA888 Gen 4 or EA888.4, is a Volkswagen Group petrol engine family. Volkswagen's North American Self-Study Program 822223 describes a 1,984 cm³ turbocharged direct-injection four-cylinder with an 82.5 mm bore, 92.8 mm stroke and four valves per cylinder. It documents different Evo4 GTI, Atlas, Arteon and Golf R examples; engine output and equipment depend on the specific vehicle. This page uses those published examples, not a blanket specification for every EA888 Evo4.
Applications and engine-control identification
Volkswagen's November 2022 SSP 822223 identifies Continental Simos 19.6 engine management in its table of North American Evo4 GTI, Atlas, Arteon and Golf R examples. It lists 241 hp for its GTI and 315 hp for its Golf R example; these are the cited market/application ratings, not universal figures. The document does not provide individual engine codes in that table.
For a separately documented European-market product fitment, RacingLine identifies the 245 PS DNPA, Garrett turbocharger and either Simos 19.3 or Simos 19.6 in the scope of its plug-in module. Its list includes specified Mk8 Golf GTI and Octavia vRS models, among others. This is the supplier's fitment statement, not evidence that every car bearing that model badge or engine code uses both ECU variants. Confirm ECU identification, engine code and installed turbo on the vehicle.
Conflicting factory documents: an earlier Volkswagen 2022 GTI and Golf R overview, SSP 893213, labels the engine management Simos 18.1, while the later engine-specific SSP 822223 lists Simos 19.6 for its documented GTI and Golf R entries. The documents do not resolve that discrepancy. Read the actual ECU identification and software rather than assigning an ECU by year or brochure alone.
Record VIN, engine code, gearbox, market and emissions equipment, ECU hardware/part number, software and calibration identifier before selecting a definition or programming tool. Engine family, badge and turbo type are useful clues but do not prove a calibration is interchangeable.
Vehicles fitted with documented EA888 Evo4 examples
The list describes the cited engine and model combinations, not every engine offered in each car. Model years, emissions specification, engines and ECU can vary by market and production date; identify the engine and controller on the actual vehicle.
| Vehicle examples | Application described by source |
|---|---|
| Volkswagen Golf Mk8 GTI | Volkswagen identifies the 245 PS European launch GTI with EA888 evo4. Volkswagen GTI engine description. The supplier lists selected 245 PS DNPA examples from 2020. RacingLine 245 PS fitment. |
| Volkswagen Golf Mk8 GTI Clubsport and Golf R / R Variant | VW identifies the 2020 Clubsport's 300 PS and the 2024 Golf R models' 333 PS engines as Evo4. These are different performance and market specifications. VW Clubsport release; VW Golf R engine description. |
| Volkswagen Atlas and Arteon; Golf GTI and Golf R | VW's North American SSP 822223 lists these models in its Evo4 table; the publication gives different outputs and does not provide an engine code for each model. It lists Simos 19.6 but another VW GTI/R publication differs, as described above. VW SSP 822223. |
| Volkswagen Tiguan II 245 PS; SEAT Tarraco 245 PS; Škoda Kodiaq 245 PS and Octavia IV vRS 245 PS | RacingLine lists selected 2021-on Tiguan II, Tarraco and Kodiaq and 2020-on Octavia IV vRS in its 245 PS Evo4/DNPA product fitment. These are vendor-listed applications, not proof that every model, market or engine uses DNPA. RacingLine 245 PS fitment. |
| Audi A3 8Y and TT 45 TFSI, 245 PS; CUPRA Leon IV and Formentor, 245 PS | RacingLine includes selected 245 PS cars in its DNPA/Garrett product scope; its listed date for A3, Leon and Formentor starts in 2020, but the TT listing does not state a date. Confirm each vehicle. RacingLine 245 PS fitment. |
| Audi S3 8Y; CUPRA Leon 300 PS, Formentor 310 PS and Ateca 310 PS; VW Tiguan R and Arteon R | The vendor lists selected 300–320 PS Evo4 applications, with engine codes DNFB, DNFC, DNFG, DSFE and DSFA collectively; it does not assign a specific code to each row. The listed start is 2020 for Leon/Formentor and 2021 for S3, Ateca, Tiguan R and Arteon R. RacingLine higher-output fitment. VW independently describes the Arteon R Evo4. |
| Škoda Octavia RS and Kodiaq RS, 2025 examples | Škoda describes the updated 265 PS Octavia RS and Kodiaq RS 2.0 TSI as fourth-generation EA888 applications. Škoda 2025 engine press material. |
Images
See Volkswagen's Golf R media pack, page 8 for an illustration accompanying its EA888 LK3 Evo4 description. A separate 2022 Golf GTI review includes an engine-bay photograph. These are links to their publishers' material; the pictured equipment need not match every vehicle.
Mechanical design and fuel system
For its Evo4 example, Volkswagen SSP 822223 describes a chain-driven valvetrain and a revised chain tensioner, with separate balance-shaft and oil-pump drives. It notes changes to the pistons, block acoustics and fuel system compared with Gen 3. Service parts, timing procedures and oil specifications must be checked for the exact engine code and model year; similar layouts do not establish parts interchangeability.
The documented direct-injection system uses a four-lobe cam-driven high-pressure pump, metering valve N290, rail-pressure sensor G247 and injectors N30–N33. Volkswagen describes modified injectors, a forged rail and fuel pressure up to 350 bar. That is a system description, not a target to impose on a tune or a guarantee of pump or injector capacity at every engine speed. Its warm-idle pressure description is condition dependent and must not be used as a universal full-load threshold. Verify any additional port-injection hardware independently: the described direct-injection layout does not prove that all Evo4 cars have an MPI rail.
Turbocharging, breather and emissions equipment
The same Volkswagen training manual describes a crankcase and tank-breather arrangement using a turbocharger suction-jet pump and separate one-way valves. It identifies N80 for canister purge and G950 as a breather-line pressure sensor in its illustrated system; the text also associates G950 with ULEV70 equipment. Do not assume every market or engine variant has the same sensor or hose routing. A turbo or inlet conversion must preserve the correct breather connections, check valves and sensor function for the actual hardware. See Evo4 crankcase ventilation and pressure logging.
Volkswagen describes an upstream oxygen sensor at the catalyst in this Evo4 example, rather than at the turbocharger as in its comparison Gen 3. Catalyst, particulate-filter and sensor equipment vary by market and vehicle; verify them against the vehicle's parts and service information rather than extrapolating one configuration worldwide.
Simos 19 control and tuning context
COBB's Mk8 Volkswagen / 8Y Audi tuning guide describes a torque-oriented strategy in its supported examples: pedal input contributes to driver torque demand, torque-to-air maps produce an air request, and boost and other limits constrain delivery. Its editor labels include Driver Clutch Torque Demand, Mass Air Set Point for Torque Intervention and Reference Indicated Torque. Those are COBB-specific map labels, not universal Simos 19 map names or binary addresses. Match the exact ECU software and active operating mode; requested torque, estimated torque and measured engine or wheel output are different quantities.
For a useful baseline, compare pedal, engine speed and gear with available torque request and limits, boost or manifold pressure target and actual, rail-pressure target and actual, lambda target and actual, ignition and individual-cylinder knock corrections. Identify pressure location and absolute versus gauge units. A commanded actuator position or calculated torque is not proof of achieved flow or measured torque. Record fuel, temperatures and faults, and assess gearbox torque coordination before increasing load. The COBB Mk8 monitor list is a product-specific example; channels and availability depend on the tool and calibration.
Further technical guides: Simos 19 Evo4 torque demand and air model · boost and wastegate control · fuel pressure and injection · DSG torque coordination · Simos 18 and 19 comparison.
Family overview: Volkswagen EA888 engine family and ECU identification, including links to the other generations.
Sources
- Volkswagen SSP 822223, 2.0L EA888 EVO4 Engine, version 1.3, November 2022, pp. 1–2 and 11–18. North American application table, mechanics, injection and ventilation. Independent mirror.
- Volkswagen SSP 893213, The 2022 GTI and Golf R, November 2021, p. 13. Earlier vehicle overview with conflicting ECU designation. Independent mirror.
- RacingLine EA888.4 DNPA PCM application, supplier's stated engine/ECU fitment.
- COBB Mk8 Volkswagen / 8Y Audi tuning guide and engine monitor list, product-specific tuning and logging examples.
Sources reviewed 17 November 2026.
Turbo and fuelling upgrades: Some Mk8 GTI installations can be adapted to the Mk8 Golf R/S3 turbo with suitable conversion hardware and ECU software. The Gen 3 and Evo4 turbo guide identifies a supplier package and its application limits; see also the HPFP and LPFP upgrade comparison.
Injector upgrades: APR lists a supplementary four-injector port kit for certain Mk8 Golf R and S3 Evo4 applications, with matched software and turbo-system requirements. See the injector comparison; this does not establish fitment for every Evo4 GTI.
Intercooler upgrades: The intercooler comparison lists selected MQB Evo units, including RacingLine VWR141000 and Wagner 200001178, with manufacturer core dimensions and installation restrictions. Verify the engine code and chassis before ordering.
Intake upgrades: The intake comparison lists Mk8 GTI/R and other selected Evo4 parts. Turbo-inlet elbows vary by turbo and application, including different hardware for selected 245 PS and 300–320 PS cars.
Exhaust upgrades: The exhaust comparison lists selected Mk8 GTI GPF-back and Golf R valved cat-back systems, as well as an application-specific catalyst/OPF downpipe.