Tuning Wiki

This guide covers selected transverse 2.0-litre EA888 Gen 3 MQB and EA888 evo4 applications. Verify the engine code, model year, market, gearbox, ECU calibration and original turbo part number before ordering: EA888 does not describe a single interchangeable turbo. Manufacturer ratings below are examples, not guaranteed results.

Example: Mk7 GTI to Golf R-type turbo

Volkswagen rated the 2013–17 Golf GTI at 220 PS and the 2014–16 Golf R at 300 PS in its European specification. Garrett identifies representative Mk7 GTI 2.0 cars with IHI IS20 turbo 06K145874M and Golf R/S3 cars with IS38 06K145722H; check the specific original and replacement part number because revisions and vehicle specifications vary. IS38 conversion on a compatible 2.0 GTI/A3 gives the lower-output vehicle the higher-output model's turbo type, but a turbo swap alone does not turn the complete car or engine into a Golf R. Volkswagen GTI ratings; Volkswagen Golf R ratings; Garrett fitment table.

Use a calibration written for the recipient ECU, IS38 and actual fuel. Integrated Engineering's IS38 map pack is software only, for listed 2015–21 GTI, 2019–24 GLI and 2015–21 AWD A3 2.0T applications; it requires its base tune and a separately sourced turbo. Its 91/93 AKI setup specifies intake, intercooler, downpipe and transmission tune. Its E60–E70 setup additionally specifies its TrueFlex kit and upgraded HPFP. These are the requirements of that particular tune, not a universal prescription for all conversions. Integrated Engineering hardware guide.

Gen 3 turbocharger upgrades

  • Garrett PowerMax Stage 1, 898199-5001W: GT2260S; compressor inducer/exducer 47/60 mm, turbine inducer/exducer 50/45 mm. Garrett quotes up to 485 bhp flywheel potential, calibrated electronic actuator included, and 185,000 rpm maximum turbo speed. The speed sensor is separate. Example listed applications include selected Mk7 GTI, R, Audi A3 and S3 2.0T; match the application table. Garrett product and fitment.
  • Garrett PowerMax Stage 2, 898200-5001W: G25-660; compressor 54/67 mm, turbine 54/49 mm, ball bearing, up to 600 bhp potential, 165,000 rpm maximum turbo speed. Supplied with actuator; speed sensor separate. The supplier describes its ratings as compressor-map-based potential and says output depends on calibration and modifications. Its published test TT used an intercooler, custom exhaust, reinforced pistons, larger HPFP and injectors, valve springs and transmission software, with 102-octane fuel and an ethanol mixture for Stage 2. These figures are not stock-car outcomes. Garrett specifications and test configuration.
  • APR DTR6054 system: direct-replacement turbo with matched ECU software for listed transverse Gen 3 applications. APR sells different fuel-system packages; Golf R/S3/TTS configurations can include upgraded HPFP and LPFP, with an additional MPI option. Confirm the exact part number, fuel, software and vehicle before ordering; don't assume every kit includes the same pumps or injectors. APR DTR6054 system.

In the wheel dimensions above, inducer and exducer refer to the wheel diameters specified by the supplier. Similar numbers do not establish physical compatibility with another generation.

Gen 4 / evo4: Mk8 GTI to Golf R turbo

APR's T2100021 system adapts the Continental 06Q145703G turbo used on the EA888.4 LK3 Mk8 Golf R / 8Y S3 to listed LK2 GTI applications. It includes APR's MS100262 diverter-valve conversion hardware and matched Stage 3 ECU software. APR advertises 410–478 hp depending on fuel and setup; its stated peak setup uses its intake and intercooler with stock exhaust and fuelling. Its catalogue identifies a 2022–24 GTI package: confirm exact market, ECU and fitment with APR. This is a different turbo and conversion from a Gen 3 IS20-to-IS38 swap. APR T2100021; APR conversion parts guide.

  • Garrett PowerMax evo4 917056-5002S: GT2260S, 47/60 mm compressor and 50/45 mm turbine; complete turbo with electronic actuator, 186,000 rpm maximum turbo speed, sensor sold separately. Garrett lists a 2022+ North American GTI and specified European 2020+ applications using OEM turbo 06Q145702B. It reports 447 bhp on its GTI test using 98-octane unleaded, stock intercooler and fuel system and a custom downpipe. This part is for the specified original turbo applications, not a blanket fit for every Golf R or evo4. Garrett evo4 specification and test sheet.

Planning and checks

  • Identify the exact original turbo, wastegate actuator and connector, diverter-valve location, turbo inlet, oil and coolant connections, intake and exhaust flange before buying. Arrange the correct calibration and actuator setup for the installed hardware.
  • Choose fuel and power target first. Check HPFP, LPFP, injectors and any port-injection hardware against the specific tune; monitor low-side pressure, rail pressure, commanded and measured lambda, boost, knock correction and intake temperature under appropriate controlled testing.
  • Assess intercooling, ignition, clutch or DSG torque capacity and any specified transmission calibration. Turbo speed measurement is useful where a sensor provision exists; stay within the applicable turbo speed limit.
  • Compare results only with stated fuel, supporting hardware, correction standard and whether power is measured at wheels or estimated at the engine. Claimed maximum turbo capability is not a promise of safe power on a stock engine.
  • Check the intended vehicle's local emissions, inspection and road-use requirements before choosing exhaust and software components. Supplier restrictions and approvals vary by product and jurisdiction.

Related pages

For component makes, part numbers and published pump specifications, see the EA113 and EA888 HPFP/LPFP upgrade comparison.

For selected Golf R-type direct injectors and supplementary MPI kits, including their differing flow-rating conditions and fitment, see the EA113 and EA888 injector upgrade comparison.

Intercooler selection: Compare selected MQB and MQB Evo cores, connections and installation restrictions in the intercooler upgrade guide. Use the supporting hardware required by the chosen calibration.

Intake selection: The intake upgrade guide identifies selected MQB and Evo4 airboxes and turbo-inlet elbows. Check the turbo-specific fitment and whether quoted test results include a separately sold inlet.

Exhaust selection: The exhaust guide distinguishes Mk7/Mk8 GTI and Golf R cat-backs from downpipe and OPF/GPF applications. Check the exact turbo, chassis, emissions hardware and adapter.