Standalone ECUs
Engine control unit manufacturers, families, variants and their technical references.
884 matching pages
-
Haltech Nexus T1Reference hub
Nexus T1 identification, output counts, wiring and software references.
-
Link G4X MX5X NB1 connector pinout
Structured connector pinout of the Link G4X MX5X NB1 plug-in ECU for the Mazda MX-5 NB1: 64-pin factory header with Mazda cavity designations, expansion, e-throttle and CAN connectors, from Link's installation manual.
Applies to: Link G4X MX5X NB1 plug-in ECU
-
Link G5 Voodoo Neo 4Reference hub
Link G5 Voodoo Neo 4 identification, features, software and exact-model wiring guide.
-
Link G4+ Atom and Atom II connector pinout
Function and loom colour of every cavity on the 34-way A loom header of the Link G4+ Atom and G4+ Atom II, from Link's quick start guide with numbering confirmed by AiM's connection guide.
Applies to: Link G4+ AtomLink G4+ Atom II
-
Motorsport Electronics ME442 GEN1 REV C/D connector pinout
90-pin main-connector pinout of the Motorsport Electronics ME442 V2.0 revision C/D (GEN1) wire-in ECU, redrawn from the manufacturer pinout; differs from the GEN2 90-way pinout.
Applies to: Motorsport Electronics ME442
-
Haltech Nexus T2 and T1 connector pinout
Full pin assignment of the single 34-pin connector of the Haltech Nexus T2 and T1 ECUs, redrawn from the Haltech wiring diagram (rev. 2.0, August 2026), with the outputs absent on the T1 marked.
Applies to: Haltech Nexus T1Haltech Nexus T2
-
Link G5 Voodoo Neo 4 connector pinout
Pin assignments of the Link G5 Voodoo Neo 4 wire-in ECU: headers A and B, 34 cavities each, with every cavity's function.
Applies to: Link G5 Voodoo Neo 4
-
SC TyphoonReference hub
SC Typhoon legacy identification, replacement, wiring evidence and software.
-
SC Typhoon Mini harness auxiliary connector pinout
6-way Econoseal auxiliary connector of the Specialist Components Mini wiring harness for the SC Typhoon ECU, with wire colours, from the manufacturer's harness sheet.
Applies to: SC Typhoon
-
Emerald K6 original ECUReference hub
Original Emerald K6 32-bit ECU, its capabilities, software and wiring references.
-
Cosworth SQ6MReference hub
Cosworth SQ6M ECU identification, capabilities and technical references.
-
Emerald K6 original ECU connector pinout
Documented connector pins of the original Emerald K6: seven main 36-way connector positions from the manufacturer configuration guide and the 9-way COMMS connector (CAN and RS232) from third-party integration instructions.
Applies to: Emerald K6 original ECU
-
MoTeC M2RReference hub
MoTeC M2R ECU identity, hardware, software and model-specific wiring sources.
-
Haltech E6SReference hub
Haltech E6S historical controller identification and model-specific documentation.
-
Link G4+ AtomReference hub
Link G4+ Atom identification, features, software and exact-model wiring guide.
-
Cosworth SQ6M connector pinout
Pin assignments of the three Deutsch Autosport connectors (AS216-26PN, AS216-35PN, AS216-26PA; 107 contacts) of the Cosworth Pectel SQ6M, from Cosworth product information 29E-071520-5E; pin-index drawings.
Applies to: Cosworth SQ6M
-
Haltech E6S connector pinout
Pin assignments of the 36-pin J1 ECU main connector of the Haltech E6S, with harness wire colours, redrawn from Haltech's E6S main harness drawing (rev B).
Applies to: Haltech E6S
-
FuelTech FT500LITEReference hub
FuelTech FT500LITE identification, features, software and wiring references.
-
FuelTech FT500Reference hub
FuelTech FT500 identification, features, software and wiring references.
-
MoTeC M2R connector pinout
Structured 36-pin index of the obsolete MoTeC M2R two-rotor Gold Box ECU (part 10006), from MoTeC installation notes DVIN0018.
Applies to: MoTeC M2R
-
Emerald K6+Reference hub
Emerald K6+: model identification, generation and documented wiring.
-
MicroSquirt V2Reference hub
Identification and documentation for MicroSquirt V2.
-
Link G4X MonsoonXReference hub
Link G4X MonsoonX identification, features, software and exact-model wiring guide.
-
Haltech Nexus S3Reference hub
Nexus S3 identification, output counts, wiring and software references.
-
Haltech Nexus S2Reference hub
Nexus S2 identification, output counts, wiring and software references.
-
MicroSquirt V3Reference hub
MicroSquirt V3 identification, documented capabilities and wiring resources.
-
SC Tornado 2Reference hub
SC Tornado 2 legacy identification, replacement, wiring evidence and software.
-
FuelTech FT500 and FT500LITE connector pinout
Pin assignments of the 24-way and 16-way harness connectors shared by the FuelTech FT500 SFI and FT500LITE SFI, redrawn from FuelTech's installation manual.
Applies to: FuelTech FT500FuelTech FT500LITE
-
Motorsport Electronics ME100 GEN1Reference hub
Earlier ME100 ignition-only controller and its 28-way ME100/ME221 GEN1 connector reference.
-
Emerald K6 and K6+ 36-way connector pinout
Emerald K6/K6+ 36-way ECU connector, face viewed from cable entry, with all 36 pins, functions and part-loom wire colours from Emerald's drive-by-wire part-loom wiring details.
Applies to: Emerald K6 original ECUEmerald K6+
-
Link G4X MonsoonX connector pinout
Structured connector pinout of the Link G4X MonsoonX wire-in ECU: the single 34-way A loom connector with functions and loom wire colours, from Link's quick-start guide.
Applies to: Link G4X MonsoonX
-
MicroSquirt V3 and V2 AMPSEAL connector pinout
Structured pin tables of the 35-way AMPSEAL connector of the MicroSquirt V3 (manufacturer manual) and the earlier MicroSquirt V2, with a redrawn pin index.
Applies to: MicroSquirt V2MicroSquirt V3
-
Link G4X XtremeXReference hub
Link G4X XtremeX identification, features, software and exact-model wiring guide.
-
SC Typhoon 2Reference hub
SC Typhoon 2 legacy identification, replacement, wiring evidence and software.
-
Motorsport Electronics ME221Reference hub
ME221 GEN1 and GEN2 wire-in ECU identification, installation and pinouts.
-
Adaptronic eSel022Reference hub
Adaptronic eSel022 Select plug-in ECU application, installation and manufacturer wiring guide.
-
Haltech Nexus S3 and S2 connector pinout
Full pin assignment of the Haltech Nexus S3 and Nexus S2 ECUs: connectors A and C, 68 pins, redrawn from the Haltech HT-182200 wiring diagram, with the outputs absent on the S2 marked.
Applies to: Haltech Nexus S2Haltech Nexus S3
-
MoTeC M190Reference hub
MoTeC M190 ECU identity, hardware, software and model-specific wiring sources.
-
Haltech E6KReference hub
Haltech E6K: identification, model features and documented wiring.
-
Link G4X XtremeX connector pinout
Pin assignments of the Link G4X XtremeX wire-in ECU: A and B loom connectors, 34 cavities each, with function and loom colour per pin.
Applies to: Link G4X XtremeX
-
SC Typhoon 2 and Tornado 2 connector pinout
35-way connector shared by the SC Typhoon 2 and Tornado 2 legacy ECUs, and the Tornado 2's additional 23-way connector: all 58 pins from the manufacturer's SXTune manual.
Applies to: SC Tornado 2SC Typhoon 2
-
Link G4 Xtreme originalReference hub
G4 Xtreme original identification, legacy support and documented wiring limitations.
-
Adaptronic eSel022 connector pinout
Structured connector pinout of the Adaptronic eSel022 Select plug-in ECU for the Mazda RX-7 FD Series 8 (13B-REW twin turbo): four-section factory plug, 84 listed pins, redrawn from the manufacturer installation guide.
Applies to: Adaptronic eSel022
-
Link G4 Xtreme original connector pinout
Function and loom colour of all 68 pins on the two 34-pin headers (A and B) of the original (pre-G4+) Link G4 Xtreme, from Link's 2010 G4 installation manual.
Applies to: Link G4 Xtreme original
-
Motorsport Electronics ME221 and ME100 GEN1 28-way connector pinout
28-way (12-way + 16-way TE) wire-in connector pinout of the Motorsport Electronics ME221 GEN1 and ME100 GEN1, with loom colours, redrawn from the manufacturer pinout.
Applies to: Motorsport Electronics ME100 GEN1Motorsport Electronics ME221
-
MoTeC M190 connector pinout
Structured pinout of the MoTeC M190 (part 13190) Autosport connectors A (55-way), B (26-way) and C (55-way), from the MoTeC datasheet.
Applies to: MoTeC M190
-
FuelTech FT470Reference hub
FuelTech FT470 identification, features, software and wiring references.
-
Haltech E6K connector pinout
Pin assignments of the 36-pin J1 ECU main connector of the Haltech E6K, with harness wire colours, redrawn from Haltech's E6K main harness drawing (rev F).
Applies to: Haltech E6K
-
FuelTech FT470 connector pinout
Pin assignments of the FuelTech FT470 (VisionFT) 44-way harness connector, including Flex IO input numbers and the integrated wideband O2 connections, redrawn from FuelTech's quick install guide.
Applies to: FuelTech FT470
-
Link G4X MINIX plug-in ECUReference hub
Link MINIX G4X plug-in ECU for MINI R50/R52/R53, with installation and pinout reference.
-
MaxxECU Porsche 996 turbo 2001-2005 plug-in adapterReference hub
Application identification, connector and wiring reference for the MaxxECU Porsche 996 turbo 2001-2005 GEN1 plug-in adapter.
-
MicroSquirt Module V2.2Reference hub
Identification and documentation for MicroSquirt Module V2.2.
-
Haltech Nexus Rebel KReference hub
Haltech Nexus Rebel K identification, model-specific documentation and wiring context.
-
Link G4X MINIX connector pinout
Structured connector pinout of the Link G4X MINIX (MiniLink) plug-in ECU for the MINI R53: 121-pin two-connector factory header, 8-position expansion connector and 5-pin CAN 1/RS232 connector, from Link's installation manual.
Applies to: Link G4X MINIX plug-in ECU
-
MicroSquirt Module V2.2 connector pinout
Pin tables of the J2 50-pin main header and J1 10-pin secondary header of the MicroSquirt Module V2.2, with a redrawn pin index.
Applies to: MicroSquirt Module V2.2
-
MaxxECU Porsche 996 turbo 2001-2005 plug-in adapter connector pinout
Pinout of the 16-pin extra connector on the MaxxECU GEN1 plug-in adapter for the Porsche 996 Turbo (2001-2005), a MaxxECU PRO solution, from the manufacturer's guide; redrawn diagram.
Applies to: MaxxECU Porsche 996 turbo 2001-2005 plug-in adapter
-
Link G4 Lightning connector pinout
Function and loom colour of every position on the 26-position header of the original (pre-G4+) Link G4 Lightning, from Link's 2010 G4 installation manual.
Applies to: Link G4 Lightning
-
Motorsport Electronics ME360Reference hub
ME360 GEN2 wire-in fuel-and-ignition ECU, specifications and 90-way pinout.
-
Emerald K3Reference hub
Emerald K3: model identification, generation and documented wiring.
-
FuelTech FT600Reference hub
FuelTech FT600 identification, features, software and wiring references.
-
FuelTech FT550LITEReference hub
FuelTech FT550LITE identification, features, software and wiring references.
-
FuelTech FT550Reference hub
FuelTech FT550 identification, features, software and wiring references.
-
FuelTech FT450Reference hub
FuelTech FT450 identification, features, software and wiring references.
-
MoTeC M182Reference hub
MoTeC M182 ECU identity, hardware, software and model-specific wiring sources.
-
Haltech E6MReference hub
Haltech E6M historical controller identification and model-specific documentation.
-
Haltech E6HReference hub
Haltech E6H historical controller identification and model-specific documentation.
-
Link G4 Atom original connector pinout
Function and loom colour of every position on the 26-position header of the original (pre-G4+) Link G4 Atom, from Link's 2010 G4 installation manual.
Applies to: Link G4 Atom original
-
Emerald K3 connector pinout
Emerald K3 36-way loom connector (wire-side face, all 36 pins from the manufacturer manual v057) and 9-way COMMS connector (CAN and RS232, third-party integration instructions).
Applies to: Emerald K3
-
Haltech Nexus Rebel K connector pinout
ECU connector pinout of the Haltech Nexus Rebel K (Honda K20/K24) with its terminated harness HT-186402: connectors A, C and E, 72 pins, redrawn from the Haltech harness guide.
Applies to: Haltech Nexus Rebel K
-
Link G4X WRX9X plug-in ECUReference hub
Link WRX9X G4X plug-in ECU for Subaru WRX version 7–9, with installation and pinout reference.
-
Adaptronic eSel021Reference hub
Adaptronic eSel021 Select plug-in ECU application, installation and manufacturer wiring guide.
-
Motorsport Electronics ME221, ME360 and ME442 GEN2 90-way connector pinout
Common 90-way main-connector pinout of the Motorsport Electronics GEN2 wire-in ECUs (ME221, ME360, ME442), with per-model channel availability, redrawn from the manufacturer pinout.
Applies to: Motorsport Electronics ME221Motorsport Electronics ME360Motorsport Electronics ME442
-
RM-Primis universal standalone ECUReference hub
RM Racing Electronics RM-Primis programmable standalone ECU, platform and vehicle-specific adapter kits.
-
MoTeC M182 connector pinout
Structured pinout of the MoTeC M182 (part 13182) Autosport connectors A (55-way), B (26-way) and C (55-way), from the MoTeC datasheet.
Applies to: MoTeC M182
-
Cosworth SQ6Reference hub
Cosworth SQ6 ECU identification, capabilities and technical references.
-
Haltech E6H and E6M connector pinout
Pin assignments of the 36-pin J1 ECU main connector shared by the Haltech E6H and E6M, with harness wire colours, redrawn from Haltech's E6H/M main harness drawing.
Applies to: Haltech E6HHaltech E6M
-
Adaptronic eSel021 connector pinout
Structured 76-pin connector pinout of the Adaptronic eSel021 Select plug-in ECU for the Mazda RX-7 FD Series 6 (13B-REW twin turbo), redrawn from the manufacturer installation guide.
Applies to: Adaptronic eSel021
-
FuelTech FT450, FT550 and FT600 connector pinout
Pin assignments of the PowerFT ECU harness connectors: 26-way A (FT450, FT550, FT550LITE), 26-way B (FT550, FT550LITE) and 34-way A and B (FT600), redrawn from FuelTech's installation manual.
Applies to: FuelTech FT450FuelTech FT550FuelTech FT550LITEFuelTech FT600
-
Link G4 Storm originalReference hub
G4 Storm original identification, legacy support and documented wiring limitations.
-
RM-Primis universal standalone ECU connector pinout
64-way main header of the RM Racing Electronics RM-Primis standalone ECU: all 64 cavities (A1 to Q4) with functions from the manufacturer's wiring diagram.
Applies to: RM-Primis universal standalone ECU
-
Link G4X WRX9X connector pinout
Pin assignments of the Link G4X WRX9X (WRXLink 7-9) plug-in ECU for the Subaru Impreza WRX/STi version 7 to 9: factory header connectors A to E (122 cavities) plus the Link expansion and CAN/RS232 connectors.
Applies to: Link G4X WRX9X plug-in ECU
-
Link G4 RXReference hub
Link G4 RX historical ECU identification and G4 installation manual.
-
Cosworth SQ6 connector pinout
88-way connector of the Cosworth Pectel SQ6 (part 01E-500700), every pin with manufacturer function and rating; redrawn from Cosworth product information 29E-071516-4E, view looking into the connector.
Applies to: Cosworth SQ6
-
MegaSquirt-IIIReference hub
MegaSquirt-III identification, documented capabilities and wiring resources.
-
Link G4 RX and Storm connector pinout
Function and loom colour of all 34 pins of the original (pre-G4+) Link G4 RX and G4 Storm header, which Link's 2010 G4 installation manual gives identically for both models.
Applies to: Link G4 RXLink G4 Storm original
-
Link G4X JZX90X plug-in ECUReference hub
Link JZX90X G4X plug-in ECU for Toyota JZX90, with installation and pinout reference.
-
MegaSquirt-3 MS3X/V3.57 connector pinout
Pin-by-pin tables of the DB37 main connector and the DB37 MS3X expansion connector of the MegaSquirt-3 MS3X/V3.57 ECU, with redrawn connector faces.
Applies to: MegaSquirt-III
-
Electromotive TECs200Reference hub
Electromotive TECs200 identification, documentation and wiring sources.
-
Haltech Nexus Rebel JZReference hub
Haltech Nexus Rebel JZ identification, model-specific documentation and wiring context.
-
Link G4X JZX90X connector pinout
Structured connector pinout of the Link G4X JZX90X plug-in ECU for the Toyota JZX90: 100-pin factory main header, 16-position expansion connector, 8-position e-throttle connector and 4-pin CAN connector, from Link's installation manual.
Applies to: Link G4X JZX90X plug-in ECU
-
Electromotive TECs200 connector pinout
Electromotive TECs200 73-pin Molex MX123 connector, face drawn from the wire side, with all 73 positions, functions, harness colours and gauges from the manufacturer manual v0.1 appendices IV and V.
Applies to: Electromotive TECs200
-
MoTeC M181Reference hub
MoTeC M181 ECU identity, hardware, software and model-specific wiring sources.
-
MaxxECU Nissan Skyline R34 GT-R (RB26) plug-in adapterReference hub
Application identification, connector and wiring reference for the MaxxECU Nissan Skyline R34 GT-R (RB26) GEN1 plug-in adapter.
-
Adaptronic eSel020Reference hub
Adaptronic eSel020 Select plug-in ECU application, installation and manufacturer wiring guide.
-
Haltech Nexus Rebel JZ connector pinout
ECU connector pinout of the Haltech Nexus Rebel JZ (Toyota 1JZ/2JZ) with its terminated harness: connectors A, C and E, 72 pins, redrawn from the Haltech harness guide.
Applies to: Haltech Nexus Rebel JZ
-
ECUMaster EMU Black Lotus K4 plug-inReference hub
RRR Lotus S2 K4 plug-in ECU using the EMU Black platform, installation and rear auxiliary connector pinout.
-
Haltech E6GMXReference hub
Haltech E6GMX historical controller identification and model-specific documentation.
-
MaxxECU Nissan Skyline R34 GT-R (RB26) plug-in adapter connector pinout
Pinout of the 16-pin extra connector, the 6-pin LSU 4.2 wideband sensor connector and the 3-pin analogue input connector on the MaxxECU GEN1 plug-in adapter for the Nissan Skyline R34 GT-R RB26, from the manufacturer's guide; redrawn diagram.
Applies to: MaxxECU Nissan Skyline R34 GT-R (RB26) plug-in adapter
-
MoTeC M181 connector pinout
Structured pinout of the MoTeC M181 (part 13181) Autosport connectors A (55-way), B (26-way) and C (55-way), from the MoTeC datasheet.
Applies to: MoTeC M181
-
Adaptronic eSel020 connector pinout
Structured 64-pin connector pinout of the Adaptronic eSel020 Select plug-in ECU (Nissan S13 240SX KA24DE, N14 GTi-R and SR20VE applications), redrawn from the manufacturer installation guide.
Applies to: Adaptronic eSel020