Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Audi, Cupra, SEAT, Škoda, Volkswagen

Changes from revision 2 to revision 2

Removed text is struck through; added text is highlighted.

This guide compares selected exhaust upgrades for the EA113 2.0 TFSI and EA888 1.8/2.0 TSI/TFSI. Exhaust routing is vehicle-specific: record engine code, model year, market, chassis, front- or all-wheel drive, transmission, body, bumper/diffuser, turbo, original pipework and whether a petrol particulate filter is fitted. The same vehicle name or model year can cover different engines and exhausts. Supplier fitment lists are examples; confirm the exact part and configuration before ordering.

System descriptions and specifications

A cat-back replaces exhaust pipework behind the catalytic-converter assembly; a GPF/OPF-back starts after the petrol particulate filter where fitted. An axle-back replaces only the rear portion. A downpipe connects at the turbocharger and can include a catalytic converter and, on specified systems, a particulate filter. A turbo-back package combines upstream and downstream sections; check exactly what the quoted kit includes. A muffler/resonator and an exhaust control valve have distinct functions, and systems vary in noise and compatibility.

Pipe diameter is quoted as the supplier states it; do not assume it is inside or outside diameter where that is unspecified. Tips have their own sizes and do not establish the main pipe diameter. Catalyst cell density in cells per square inch (cpsi) is not a direct measure of emissions performance or road approval. For a cat-back, check the adapter to the existing downpipe and whether cutting the original system is required. Manufacturer power claims depend on the entire combination, test conditions and the reported crank or wheel measurement.

EA113 2.0 TFSI and Mk5/Mk6 examples

Make and partSystem and specificationsApplication and important notes Scorpion SVW042Resonated stainless-steel cat-back; 76 mm / 3-inch pipe for the majority of the components, with twin 83 mm Daytona tips.Mk5 GTI and Edition 30, 2004–09, as listed; Scorpion identifies fitment to OEM or Scorpion equipment. Confirm the particular engine and connection, particularly on later Mk5 vehicles. Milltek SSXVW281Non-resonated cat-back, 304L stainless, 76.2 mm nominal pipe and twin 80 mm polished tips; OEM-downpipe adapter listed.Listed Mk5 GTI 2.0 TFSI and Edition 30 2004–09. Milltek's title calls it a race system, while its key-facts field says race product “No” and E-mark “No”; check the selected tip variant and intended-use approval directly. Borla S-Type 140248T304 stainless cat-back; 2.5-inch main pipe to dual 2-inch tailpipes, with two 3.15-inch polished tips.Manufacturer lists 2006–09 FWD Mk5 GTI in its application. Some late Mk5 cars use EA888; confirm engine, body and market. Borla claims 30% weight reduction relative to its stock comparison. Milltek SSXVW139Resonated 304L stainless cat-back, 69.85 mm nominal pipe, with Cerakote black trims.Listed Mk6 Golf R 2.0 TFSI 270 PS, 2009–13. Milltek lists an E-mark for the specified application; verify the approval and selected product against the vehicle and jurisdiction. HJS 90 95 1105Catalysed front pipe/downpipe: 70 mm inlet and outlet, 200 cpsi catalytic element, 1,022 mm length and 14 kg as listed.HJS lists selected Euro 4/5 vehicles including Golf V GTI AXX/BWA and specified EA888 applications. HJS's approval guidance limits replacement use to the vehicle types in the relevant approval; consult the exact engine, type and paperwork. This is a downpipe, not a cat-back.

EA888 Gen 1/2: transverse Mk6 GTI examples

Make and partSystem and specificationsApplication and important notes Milltek SSXVW145Part-resonated 304L stainless cat-back, 76.2 mm pipe with dual GT100 trims; Milltek lists an adapter to the original downpipe.Listed Mk6 GTI 2.0 TSI 210 PS, 2009–13. Check selected tip finish, adapter and the vehicle's original exhaust. APR CBK0016T304 stainless cat-back: single 3-inch main pipe splits to dual 2.5-inch outlets, with one straight-through muffler and twin removable 4-inch tips.Manufacturer lists Mk6 GTI 2010–14 and states that fitting requires trimming the factory midpipe. The quieter CBK0044 front muffler is separately sold. Borla S-Type 140347T304 stainless cat-back: 2.5-inch main pipe, dual 2-inch tailpipes, one muffler and twin polished 4-inch tips.Listed 2010–14 Mk6 GTI 2.0 FWD, including specified manual and automatic cars. Verify market, body and connection. XFORCE ES-VW06VMK-CBS3-inch mandrel-bent 304 stainless cat-back with a remote-controlled VAREX centre muffler, cast rear Y and 4-inch polished tips.Manufacturer identifies Mk6 GTI 10/2009–08/2013. Confirm the valve controller and fitting instructions for the actual revision; the page links a Mk7 manual.

EA888 longitudinal Audi examples

Make and partSystem and specificationsApplication and important notes AWE Touring 3015-32030T304L stainless cat-back with AWE 180 Technology resonator and dual 3.5-inch chrome-silver tips.Manufacturer lists B8/B8.5 A4 2.0T quattro sedan/Avant with dual-outlet valance. Its optional downpipe is separate. The 3.5-inch dimension is a tip size, not a stated main-pipe size. Milltek SSXAU630Non-resonated 304L stainless cat-back, 70 mm nominal pipe and quad GT80 polished trims.Listed Audi A4 2.0 TFSI B8 S line 2008–11, saloon/Avant, 2WD or quattro with Tiptronic; requires the specified S4-style lower spoiler and detailing strip. Check listed transmission and bumper. CTS Turbo CTS-EXH-CB-0019Supplier's B9 A4 cat-back listing describes T304 stainless, 3-inch main pipe, dual 2.5-inch tails and 4-inch tips.CTS lists specified 2017–24 A4 and 2017–19 Allroad applications. Its product text inconsistently mentions a downpipe and resonators despite describing a cat-back; confirm included components, facelift bumper and tip use directly with CTS before ordering.

EA888 Gen 3 MQB examples

Make and partSystem and specificationsApplication and important notes APR CBK0008T304 stainless Mk7 GTI cat-back, 3-inch main pipe splitting to dual 2.5-inch outlets, front muffler and two removable 4-inch tips.APR lists its Mk7 GTI application. Its system description specifies 3-inch outside-diameter main pipe and connection options for the original or APR downpipe; verify the exact vehicle and included link pipes. Borla S-Type 140597T304 stainless cat-back with 2.5-inch main and dual 2-inch tailpipes, plus twin polished 4-inch tips.Manufacturer lists 2015–17 Mk7 GTI 2.0 FWD and explicitly excludes Mk7.5. Confirm body, drivetrain and market. AWE Touring 3015-33050T304 stainless cat-back using 3-inch and 2.25-inch pipes; Touring resonator and twin 102 mm diamond-black tips.Listed Mk7 GTI 2.0T; a separate Track configuration replaces the resonator. AWE's claimed maximum 21 crank hp/24 lb-ft is for a combination with an aftermarket downpipe, not a cat-back-only result. HJS 90 81 116076 mm downpipe with 80 mm inlet; HJS describes a 100 + 200 cpsi configuration and also lists 200 cpsi in its product data. Length 825 mm, weight 12 kg.Maker's approval table includes listed Euro 6c non-OPF Golf VII GTI facelift and Octavia RS DLBA examples. Confirm the precise catalyst configuration, approval and adapter for the exact vehicle; this is not a complete exhaust. HJS 90 82 116076 mm downpipe assembly, 80 mm inlet; HJS lists 200 cpsi catalyst plus 200 cpsi OPF, 837 mm long and 14 kg.For specified Euro 6d-Temp OPF vehicles, including listed Mk7 GTI DKTB. Applicability and approval are restricted to HJS's vehicle table and documentation; do not substitute it for a non-OPF configuration based only on model name.

EA888 Evo4 Mk8/MQB Evo examples

Make and partSystem and specificationsApplication and important notes Scorpion SVW064CFResonated stainless GPF-back; nominal 76 mm for the majority of pipework, two 114 mm Ascari tips. Scorpion lists 17 kg versus 21 kg for its original reference.Listed Mk8/Mk8.5 GTI GPF model, 2020–26. The manufacturer's Clubsport system uses a different part; confirm GPF, body and tip arrangement. Cobra Sport VW120TP77Manufacturer's Mk8 GTI/Clubsport GPF-back range, 76.2 mm 304 stainless, with resonated/non-resonated and tip options.Check the exact selected suffix and contents. Cobra specifies that this GPF-back configuration retains the original catalyst and GPF; sound readings on its listing apply only to its stated test setup. APR CBK0052T304 stainless Mk8 Golf R cat-back, 3-inch outside-diameter main pipe, four 2.5-inch outlets, four 131 × 99 mm carbon tips, two valves and Helmholtz resonators.Listed 2022–25 Golf R. APR describes factory valve control and an included reducer for the original connection; verify market, OPF arrangement, bumper and exact application before purchase. Its claimed wheel-power gain is test-specific. AWE Touring / Track Mk8 GTI suiteT304L stainless cat-back with 3-inch and 2.5-inch pipes, 0.065-inch wall and twin 5-inch tips. Touring uses AWE's 180 Technology; Track is a separate, louder configuration.AWE specifies an inlet adapter for the original downpipe and lists different tip finishes and part numbers. Select the exact kit, market, bumper and OPF/GPF configuration before ordering. HJS 90 82 118076 mm downpipe assembly with 88 mm inlet, listed 200 cpsi catalyst plus 200 cpsi OPF; 837 mm length, 14 kg.HJS lists specific Euro 6d Evo4 applications including Mk8 GTI DNPA and GTI Clubsport DNFC with OPF. Check its exact vehicle and approval table and whether any inspection condition applies; not a cat-back.

Choosing and checking a system

Decide which section is being replaced and check existing turbo flange, downpipe connection, adapters, hangers, tip spacing, bumper clearance, valves, sensors and any OPF/GPF. GTI, Golf R, different transmissions, estate bodies and longitudinal cars are not automatically interchangeable. Check supplier restrictions, vehicle-specific approvals and intended use before purchase. A sports catalyst or a stated cell density does not by itself prove that a system is approved for a particular vehicle or road jurisdiction. Retain the correct emissions equipment and required sensor connections for the selected approved configuration. A cat-back may be selected for sound, packaging and appearance; a downpipe also changes the turbo outlet and aftertreatment arrangement. Do not treat a claimed turbo-back gain as a cat-back-only result or assume a particular remap is required or unnecessary without the kit and calibration supplier's application guidance. Install according to the applicable instructions and check clearances, joints, valve operation and leaks. If performance is being compared, record exhaust configuration, tune, fuel, ambient conditions and whether power is reported at wheels or crank. Larger diameter by itself does not establish lower restriction, noise level or a measured horsepower increase.

See the EA113 turbo guide, EA888 Gen 1/2 turbo guide and EA888 Gen 3/Evo4 turbo guide for related package requirements. The intake comparison and intercooler comparison address separate hardware.

Manufacturer listings reviewed 17 November 2026. Availability, fitment, specifications, approval and part numbers can change. These are supplier statements, not independent wiki testing.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: EA113 and EA888 exhaust upgrade comparison

This guide compares selected exhaust upgrades for the EA113 2.0 TFSI and EA888 1.8/2.0 TSI/TFSI. Exhaust routing is vehicle-specific: record engine code, model year, market, chassis, front- or all-wheel drive, transmission, body, bumper/diffuser, turbo, original pipework and whether a petrol particulate filter is fitted. The same vehicle name or model year can cover different engines and exhausts. Supplier fitment lists are examples; confirm the exact part and configuration before ordering.

System descriptions and specifications

A cat-back replaces exhaust pipework behind the catalytic-converter assembly; a GPF/OPF-back starts after the petrol particulate filter where fitted. An axle-back replaces only the rear portion. A downpipe connects at the turbocharger and can include a catalytic converter and, on specified systems, a particulate filter. A turbo-back package combines upstream and downstream sections; check exactly what the quoted kit includes. A muffler/resonator and an exhaust control valve have distinct functions, and systems vary in noise and compatibility.

Pipe diameter is quoted as the supplier states it; do not assume it is inside or outside diameter where that is unspecified. Tips have their own sizes and do not establish the main pipe diameter. Catalyst cell density in cells per square inch (cpsi) is not a direct measure of emissions performance or road approval. For a cat-back, check the adapter to the existing downpipe and whether cutting the original system is required. Manufacturer power claims depend on the entire combination, test conditions and the reported crank or wheel measurement.

EA113 2.0 TFSI and Mk5/Mk6 examples

Make and partSystem and specificationsApplication and important notes
Scorpion SVW042Resonated stainless-steel cat-back; 76 mm / 3-inch pipe for the majority of the components, with twin 83 mm Daytona tips.Mk5 GTI and Edition 30, 2004–09, as listed; Scorpion identifies fitment to OEM or Scorpion equipment. Confirm the particular engine and connection, particularly on later Mk5 vehicles.
Milltek SSXVW281Non-resonated cat-back, 304L stainless, 76.2 mm nominal pipe and twin 80 mm polished tips; OEM-downpipe adapter listed.Listed Mk5 GTI 2.0 TFSI and Edition 30 2004–09. Milltek's title calls it a race system, while its key-facts field says race product “No” and E-mark “No”; check the selected tip variant and intended-use approval directly.
Borla S-Type 140248T304 stainless cat-back; 2.5-inch main pipe to dual 2-inch tailpipes, with two 3.15-inch polished tips.Manufacturer lists 2006–09 FWD Mk5 GTI in its application. Some late Mk5 cars use EA888; confirm engine, body and market. Borla claims 30% weight reduction relative to its stock comparison.
Milltek SSXVW139Resonated 304L stainless cat-back, 69.85 mm nominal pipe, with Cerakote black trims.Listed Mk6 Golf R 2.0 TFSI 270 PS, 2009–13. Milltek lists an E-mark for the specified application; verify the approval and selected product against the vehicle and jurisdiction.
HJS 90 95 1105Catalysed front pipe/downpipe: 70 mm inlet and outlet, 200 cpsi catalytic element, 1,022 mm length and 14 kg as listed.HJS lists selected Euro 4/5 vehicles including Golf V GTI AXX/BWA and specified EA888 applications. HJS's approval guidance limits replacement use to the vehicle types in the relevant approval; consult the exact engine, type and paperwork. This is a downpipe, not a cat-back.

EA888 Gen 1/2: transverse Mk6 GTI examples

Make and partSystem and specificationsApplication and important notes
Milltek SSXVW145Part-resonated 304L stainless cat-back, 76.2 mm pipe with dual GT100 trims; Milltek lists an adapter to the original downpipe.Listed Mk6 GTI 2.0 TSI 210 PS, 2009–13. Check selected tip finish, adapter and the vehicle's original exhaust.
APR CBK0016T304 stainless cat-back: single 3-inch main pipe splits to dual 2.5-inch outlets, with one straight-through muffler and twin removable 4-inch tips.Manufacturer lists Mk6 GTI 2010–14 and states that fitting requires trimming the factory midpipe. The quieter CBK0044 front muffler is separately sold.
Borla S-Type 140347T304 stainless cat-back: 2.5-inch main pipe, dual 2-inch tailpipes, one muffler and twin polished 4-inch tips.Listed 2010–14 Mk6 GTI 2.0 FWD, including specified manual and automatic cars. Verify market, body and connection.
XFORCE ES-VW06VMK-CBS3-inch mandrel-bent 304 stainless cat-back with a remote-controlled VAREX centre muffler, cast rear Y and 4-inch polished tips.Manufacturer identifies Mk6 GTI 10/2009–08/2013. Confirm the valve controller and fitting instructions for the actual revision; the page links a Mk7 manual.

EA888 longitudinal Audi examples

Make and partSystem and specificationsApplication and important notes
AWE Touring 3015-32030T304L stainless cat-back with AWE 180 Technology resonator and dual 3.5-inch chrome-silver tips.Manufacturer lists B8/B8.5 A4 2.0T quattro sedan/Avant with dual-outlet valance. Its optional downpipe is separate. The 3.5-inch dimension is a tip size, not a stated main-pipe size.
Milltek SSXAU630Non-resonated 304L stainless cat-back, 70 mm nominal pipe and quad GT80 polished trims.Listed Audi A4 2.0 TFSI B8 S line 2008–11, saloon/Avant, 2WD or quattro with Tiptronic; requires the specified S4-style lower spoiler and detailing strip. Check listed transmission and bumper.
CTS Turbo CTS-EXH-CB-0019Supplier's B9 A4 cat-back listing describes T304 stainless, 3-inch main pipe, dual 2.5-inch tails and 4-inch tips.CTS lists specified 2017–24 A4 and 2017–19 Allroad applications. Its product text inconsistently mentions a downpipe and resonators despite describing a cat-back; confirm included components, facelift bumper and tip use directly with CTS before ordering.

EA888 Gen 3 MQB examples

Make and partSystem and specificationsApplication and important notes
APR CBK0008T304 stainless Mk7 GTI cat-back, 3-inch main pipe splitting to dual 2.5-inch outlets, front muffler and two removable 4-inch tips.APR lists its Mk7 GTI application. Its system description specifies 3-inch outside-diameter main pipe and connection options for the original or APR downpipe; verify the exact vehicle and included link pipes.
Borla S-Type 140597T304 stainless cat-back with 2.5-inch main and dual 2-inch tailpipes, plus twin polished 4-inch tips.Manufacturer lists 2015–17 Mk7 GTI 2.0 FWD and explicitly excludes Mk7.5. Confirm body, drivetrain and market.
AWE Touring 3015-33050T304 stainless cat-back using 3-inch and 2.25-inch pipes; Touring resonator and twin 102 mm diamond-black tips.Listed Mk7 GTI 2.0T; a separate Track configuration replaces the resonator. AWE's claimed maximum 21 crank hp/24 lb-ft is for a combination with an aftermarket downpipe, not a cat-back-only result.
HJS 90 81 116076 mm downpipe with 80 mm inlet; HJS describes a 100 + 200 cpsi configuration and also lists 200 cpsi in its product data. Length 825 mm, weight 12 kg.Maker's approval table includes listed Euro 6c non-OPF Golf VII GTI facelift and Octavia RS DLBA examples. Confirm the precise catalyst configuration, approval and adapter for the exact vehicle; this is not a complete exhaust.
HJS 90 82 116076 mm downpipe assembly, 80 mm inlet; HJS lists 200 cpsi catalyst plus 200 cpsi OPF, 837 mm long and 14 kg.For specified Euro 6d-Temp OPF vehicles, including listed Mk7 GTI DKTB. Applicability and approval are restricted to HJS's vehicle table and documentation; do not substitute it for a non-OPF configuration based only on model name.

EA888 Evo4 Mk8/MQB Evo examples

Make and partSystem and specificationsApplication and important notes
Scorpion SVW064CFResonated stainless GPF-back; nominal 76 mm for the majority of pipework, two 114 mm Ascari tips. Scorpion lists 17 kg versus 21 kg for its original reference.Listed Mk8/Mk8.5 GTI GPF model, 2020–26. The manufacturer's Clubsport system uses a different part; confirm GPF, body and tip arrangement.
Cobra Sport VW120TP77Manufacturer's Mk8 GTI/Clubsport GPF-back range, 76.2 mm 304 stainless, with resonated/non-resonated and tip options.Check the exact selected suffix and contents. Cobra specifies that this GPF-back configuration retains the original catalyst and GPF; sound readings on its listing apply only to its stated test setup.
APR CBK0052T304 stainless Mk8 Golf R cat-back, 3-inch outside-diameter main pipe, four 2.5-inch outlets, four 131 × 99 mm carbon tips, two valves and Helmholtz resonators.Listed 2022–25 Golf R. APR describes factory valve control and an included reducer for the original connection; verify market, OPF arrangement, bumper and exact application before purchase. Its claimed wheel-power gain is test-specific.
AWE Touring / Track Mk8 GTI suiteT304L stainless cat-back with 3-inch and 2.5-inch pipes, 0.065-inch wall and twin 5-inch tips. Touring uses AWE's 180 Technology; Track is a separate, louder configuration.AWE specifies an inlet adapter for the original downpipe and lists different tip finishes and part numbers. Select the exact kit, market, bumper and OPF/GPF configuration before ordering.
HJS 90 82 118076 mm downpipe assembly with 88 mm inlet, listed 200 cpsi catalyst plus 200 cpsi OPF; 837 mm length, 14 kg.HJS lists specific Euro 6d Evo4 applications including Mk8 GTI DNPA and GTI Clubsport DNFC with OPF. Check its exact vehicle and approval table and whether any inspection condition applies; not a cat-back.

Choosing and checking a system

  1. Decide which section is being replaced and check existing turbo flange, downpipe connection, adapters, hangers, tip spacing, bumper clearance, valves, sensors and any OPF/GPF. GTI, Golf R, different transmissions, estate bodies and longitudinal cars are not automatically interchangeable.
  2. Check supplier restrictions, vehicle-specific approvals and intended use before purchase. A sports catalyst or a stated cell density does not by itself prove that a system is approved for a particular vehicle or road jurisdiction. Retain the correct emissions equipment and required sensor connections for the selected approved configuration.
  3. A cat-back may be selected for sound, packaging and appearance; a downpipe also changes the turbo outlet and aftertreatment arrangement. Do not treat a claimed turbo-back gain as a cat-back-only result or assume a particular remap is required or unnecessary without the kit and calibration supplier's application guidance.
  4. Install according to the applicable instructions and check clearances, joints, valve operation and leaks. If performance is being compared, record exhaust configuration, tune, fuel, ambient conditions and whether power is reported at wheels or crank. Larger diameter by itself does not establish lower restriction, noise level or a measured horsepower increase.

See the EA113 turbo guide, EA888 Gen 1/2 turbo guide and EA888 Gen 3/Evo4 turbo guide for related package requirements. The intake comparison and intercooler comparison address separate hardware.

Manufacturer listings reviewed 17 November 2026. Availability, fitment, specifications, approval and part numbers can change. These are supplier statements, not independent wiki testing.

Revision 2: EA113 and EA888 exhaust upgrade comparison

This guide compares selected exhaust upgrades for the EA113 2.0 TFSI and EA888 1.8/2.0 TSI/TFSI. Exhaust routing is vehicle-specific: record engine code, model year, market, chassis, front- or all-wheel drive, transmission, body, bumper/diffuser, turbo, original pipework and whether a petrol particulate filter is fitted. The same vehicle name or model year can cover different engines and exhausts. Supplier fitment lists are examples; confirm the exact part and configuration before ordering.

System descriptions and specifications

A cat-back replaces exhaust pipework behind the catalytic-converter assembly; a GPF/OPF-back starts after the petrol particulate filter where fitted. An axle-back replaces only the rear portion. A downpipe connects at the turbocharger and can include a catalytic converter and, on specified systems, a particulate filter. A turbo-back package combines upstream and downstream sections; check exactly what the quoted kit includes. A muffler/resonator and an exhaust control valve have distinct functions, and systems vary in noise and compatibility.

Pipe diameter is quoted as the supplier states it; do not assume it is inside or outside diameter where that is unspecified. Tips have their own sizes and do not establish the main pipe diameter. Catalyst cell density in cells per square inch (cpsi) is not a direct measure of emissions performance or road approval. For a cat-back, check the adapter to the existing downpipe and whether cutting the original system is required. Manufacturer power claims depend on the entire combination, test conditions and the reported crank or wheel measurement.

EA113 2.0 TFSI and Mk5/Mk6 examples

Make and partSystem and specificationsApplication and important notes
Scorpion SVW042Resonated stainless-steel cat-back; 76 mm / 3-inch pipe for the majority of the components, with twin 83 mm Daytona tips.Mk5 GTI and Edition 30, 2004–09, as listed; Scorpion identifies fitment to OEM or Scorpion equipment. Confirm the particular engine and connection, particularly on later Mk5 vehicles.
Milltek SSXVW281Non-resonated cat-back, 304L stainless, 76.2 mm nominal pipe and twin 80 mm polished tips; OEM-downpipe adapter listed.Listed Mk5 GTI 2.0 TFSI and Edition 30 2004–09. Milltek's title calls it a race system, while its key-facts field says race product “No” and E-mark “No”; check the selected tip variant and intended-use approval directly.
Borla S-Type 140248T304 stainless cat-back; 2.5-inch main pipe to dual 2-inch tailpipes, with two 3.15-inch polished tips.Manufacturer lists 2006–09 FWD Mk5 GTI in its application. Some late Mk5 cars use EA888; confirm engine, body and market. Borla claims 30% weight reduction relative to its stock comparison.
Milltek SSXVW139Resonated 304L stainless cat-back, 69.85 mm nominal pipe, with Cerakote black trims.Listed Mk6 Golf R 2.0 TFSI 270 PS, 2009–13. Milltek lists an E-mark for the specified application; verify the approval and selected product against the vehicle and jurisdiction.
HJS 90 95 1105Catalysed front pipe/downpipe: 70 mm inlet and outlet, 200 cpsi catalytic element, 1,022 mm length and 14 kg as listed.HJS lists selected Euro 4/5 vehicles including Golf V GTI AXX/BWA and specified EA888 applications. HJS's approval guidance limits replacement use to the vehicle types in the relevant approval; consult the exact engine, type and paperwork. This is a downpipe, not a cat-back.

EA888 Gen 1/2: transverse Mk6 GTI examples

Make and partSystem and specificationsApplication and important notes
Milltek SSXVW145Part-resonated 304L stainless cat-back, 76.2 mm pipe with dual GT100 trims; Milltek lists an adapter to the original downpipe.Listed Mk6 GTI 2.0 TSI 210 PS, 2009–13. Check selected tip finish, adapter and the vehicle's original exhaust.
APR CBK0016T304 stainless cat-back: single 3-inch main pipe splits to dual 2.5-inch outlets, with one straight-through muffler and twin removable 4-inch tips.Manufacturer lists Mk6 GTI 2010–14 and states that fitting requires trimming the factory midpipe. The quieter CBK0044 front muffler is separately sold.
Borla S-Type 140347T304 stainless cat-back: 2.5-inch main pipe, dual 2-inch tailpipes, one muffler and twin polished 4-inch tips.Listed 2010–14 Mk6 GTI 2.0 FWD, including specified manual and automatic cars. Verify market, body and connection.
XFORCE ES-VW06VMK-CBS3-inch mandrel-bent 304 stainless cat-back with a remote-controlled VAREX centre muffler, cast rear Y and 4-inch polished tips.Manufacturer identifies Mk6 GTI 10/2009–08/2013. Confirm the valve controller and fitting instructions for the actual revision; the page links a Mk7 manual.

EA888 longitudinal Audi examples

Make and partSystem and specificationsApplication and important notes
AWE Touring 3015-32030T304L stainless cat-back with AWE 180 Technology resonator and dual 3.5-inch chrome-silver tips.Manufacturer lists B8/B8.5 A4 2.0T quattro sedan/Avant with dual-outlet valance. Its optional downpipe is separate. The 3.5-inch dimension is a tip size, not a stated main-pipe size.
Milltek SSXAU630Non-resonated 304L stainless cat-back, 70 mm nominal pipe and quad GT80 polished trims.Listed Audi A4 2.0 TFSI B8 S line 2008–11, saloon/Avant, 2WD or quattro with Tiptronic; requires the specified S4-style lower spoiler and detailing strip. Check listed transmission and bumper.
CTS Turbo CTS-EXH-CB-0019Supplier's B9 A4 cat-back listing describes T304 stainless, 3-inch main pipe, dual 2.5-inch tails and 4-inch tips.CTS lists specified 2017–24 A4 and 2017–19 Allroad applications. Its product text inconsistently mentions a downpipe and resonators despite describing a cat-back; confirm included components, facelift bumper and tip use directly with CTS before ordering.

EA888 Gen 3 MQB examples

Make and partSystem and specificationsApplication and important notes
APR CBK0008T304 stainless Mk7 GTI cat-back, 3-inch main pipe splitting to dual 2.5-inch outlets, front muffler and two removable 4-inch tips.APR lists its Mk7 GTI application. Its system description specifies 3-inch outside-diameter main pipe and connection options for the original or APR downpipe; verify the exact vehicle and included link pipes.
Borla S-Type 140597T304 stainless cat-back with 2.5-inch main and dual 2-inch tailpipes, plus twin polished 4-inch tips.Manufacturer lists 2015–17 Mk7 GTI 2.0 FWD and explicitly excludes Mk7.5. Confirm body, drivetrain and market.
AWE Touring 3015-33050T304 stainless cat-back using 3-inch and 2.25-inch pipes; Touring resonator and twin 102 mm diamond-black tips.Listed Mk7 GTI 2.0T; a separate Track configuration replaces the resonator. AWE's claimed maximum 21 crank hp/24 lb-ft is for a combination with an aftermarket downpipe, not a cat-back-only result.
HJS 90 81 116076 mm downpipe with 80 mm inlet; HJS describes a 100 + 200 cpsi configuration and also lists 200 cpsi in its product data. Length 825 mm, weight 12 kg.Maker's approval table includes listed Euro 6c non-OPF Golf VII GTI facelift and Octavia RS DLBA examples. Confirm the precise catalyst configuration, approval and adapter for the exact vehicle; this is not a complete exhaust.
HJS 90 82 116076 mm downpipe assembly, 80 mm inlet; HJS lists 200 cpsi catalyst plus 200 cpsi OPF, 837 mm long and 14 kg.For specified Euro 6d-Temp OPF vehicles, including listed Mk7 GTI DKTB. Applicability and approval are restricted to HJS's vehicle table and documentation; do not substitute it for a non-OPF configuration based only on model name.

EA888 Evo4 Mk8/MQB Evo examples

Make and partSystem and specificationsApplication and important notes
Scorpion SVW064CFResonated stainless GPF-back; nominal 76 mm for the majority of pipework, two 114 mm Ascari tips. Scorpion lists 17 kg versus 21 kg for its original reference.Listed Mk8/Mk8.5 GTI GPF model, 2020–26. The manufacturer's Clubsport system uses a different part; confirm GPF, body and tip arrangement.
Cobra Sport VW120TP77Manufacturer's Mk8 GTI/Clubsport GPF-back range, 76.2 mm 304 stainless, with resonated/non-resonated and tip options.Check the exact selected suffix and contents. Cobra specifies that this GPF-back configuration retains the original catalyst and GPF; sound readings on its listing apply only to its stated test setup.
APR CBK0052T304 stainless Mk8 Golf R cat-back, 3-inch outside-diameter main pipe, four 2.5-inch outlets, four 131 × 99 mm carbon tips, two valves and Helmholtz resonators.Listed 2022–25 Golf R. APR describes factory valve control and an included reducer for the original connection; verify market, OPF arrangement, bumper and exact application before purchase. Its claimed wheel-power gain is test-specific.
AWE Touring / Track Mk8 GTI suiteT304L stainless cat-back with 3-inch and 2.5-inch pipes, 0.065-inch wall and twin 5-inch tips. Touring uses AWE's 180 Technology; Track is a separate, louder configuration.AWE specifies an inlet adapter for the original downpipe and lists different tip finishes and part numbers. Select the exact kit, market, bumper and OPF/GPF configuration before ordering.
HJS 90 82 118076 mm downpipe assembly with 88 mm inlet, listed 200 cpsi catalyst plus 200 cpsi OPF; 837 mm length, 14 kg.HJS lists specific Euro 6d Evo4 applications including Mk8 GTI DNPA and GTI Clubsport DNFC with OPF. Check its exact vehicle and approval table and whether any inspection condition applies; not a cat-back.

Choosing and checking a system

  1. Decide which section is being replaced and check existing turbo flange, downpipe connection, adapters, hangers, tip spacing, bumper clearance, valves, sensors and any OPF/GPF. GTI, Golf R, different transmissions, estate bodies and longitudinal cars are not automatically interchangeable.
  2. Check supplier restrictions, vehicle-specific approvals and intended use before purchase. A sports catalyst or a stated cell density does not by itself prove that a system is approved for a particular vehicle or road jurisdiction. Retain the correct emissions equipment and required sensor connections for the selected approved configuration.
  3. A cat-back may be selected for sound, packaging and appearance; a downpipe also changes the turbo outlet and aftertreatment arrangement. Do not treat a claimed turbo-back gain as a cat-back-only result or assume a particular remap is required or unnecessary without the kit and calibration supplier's application guidance.
  4. Install according to the applicable instructions and check clearances, joints, valve operation and leaks. If performance is being compared, record exhaust configuration, tune, fuel, ambient conditions and whether power is reported at wheels or crank. Larger diameter by itself does not establish lower restriction, noise level or a measured horsepower increase.

See the EA113 turbo guide, EA888 Gen 1/2 turbo guide and EA888 Gen 3/Evo4 turbo guide for related package requirements. The intake comparison and intercooler comparison address separate hardware.

Manufacturer listings reviewed 17 November 2026. Availability, fitment, specifications, approval and part numbers can change. These are supplier statements, not independent wiki testing.