Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Carburettors
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Every SU carburettor meters fuel through the annular gap between a fixed-bore jet and a tapered metering needle mounted in the vacuum piston. Knowing the exact diameter profile of a needle across its length allows you to compare richer or leaner alternatives without guessing from part numbers.

Illustrative SU HS6 mixture adjustment nut below the carburettor body
Example of a jet-height mixture adjustment on an SU HS6; the table covers needle profiles for different installations, so do not assume this linkage matches every carburettor using these needles. Adapted drawing based on Nathanael Burton’s photograph, CC BY-SA 2.0; adjuster identification from SU Carburetters’ HS guide. The idle-speed screw is not shown.
1909 Skinner-Union carburettor cross-section showing a tapered needle and nozzle
Historical illustration of a Skinner-Union carburettor, showing its tapered needle (N.V.) and nozzle (J.T.). This 1909 design predates the needle profiles discussed here; it is not a drawing of a listed profile. Artist unknown; Douglas Leechman, Carburettors and Carburation (1909), p. 109, via Wikimedia Commons; public domain.

Complete HTML needle profile tables (623 needles)

The full 623-needle dataset compiled from legacy SU needle tables (NEEDLES090.txt for 0.090 in jets: 354 profiles; and NEEDLES100.txt for 0.100 in jets: 269 profiles) is published directly as HTML tables on the wiki and as a single printable PDF:

Status of the link on sucarb.co.uk: SU Carburetters' own Needle Comparison Charts page links to an external RollApp spreadsheet (rollapp.com/rollmyfile/...) which currently returns HTTP 500, and the SU FAQ notes that the older Minty Lamb needle comparison site is offline. Burlen Ltd also publishes the printed SU Needle Profile Chart (ALT 9601) covering over 700 fixed and spring-loaded profiles across 0.090 in, 0.100 in, 0.125 in and 3/16 in jets.

How to read SU needle stations

  • 16 stations at 1/8 in intervals: Station 1 is near the cylindrical base/shoulder or datum groove (idle position), and each successive station (2 through 16) steps 1/8 in (0.125 in / 3.175 mm) closer to the tip (full piston lift / wide-open throttle).
  • Values in ten-thousandths of an inch (0.0001 in): For example, 890 means 0.0890 in, and 990 means 0.0990 in.
  • Smaller number = richer mixture: Because the needle sits inside a fixed jet diameter, a smaller needle diameter at a given station leaves a larger annular fuel gap and flows more fuel.
  • Match the jet diameter family: Never install a 0.090 in needle (typically 890 at Station 1) into a 0.100 in jet (990 at Station 1), or vice versa—the idle datum clearance will be completely wrong (SU HS troubleshooting guide).
  • 1–2 character vs 3-letter codes: Classic 1–2 character codes (such as 6, M, AA, H6) are typically rigid/fixed-mount needles, whereas 3-letter codes (such as AAA, AAU, ABD, BAA, BDQ) are spring-loaded ("biased" / swing) needles introduced on later emissions-era HS and HIF carburettors.
  • Note on SM and SN: Legacy tables record a known discrepancy in older printed charts for SM and SN; both the legacy values and the corrected profiles (SM* and SN*) are retained in the HTML tables and PDF.

Jet-size families

Jet boreTypical SU carburettorsTypical Station 1 diameterNotes
0.090 inMost 1¼ in & 1½ in units (H2, HS2, HS4, HIF4, HIF38)890 (0.0890 in; some 880/900)Common on Mini, Midget/Sprite, MGB 4-cyl, Morris Minor, Spitfire
0.100 inMost 1¾ in units (H6, HD6, HS6, HIF6, HIF44)990 (0.0990 in; some 1000)Common on Triumph TR/2000/2500, Volvo B18/B20, Rover V8, Austin-Healey 3000, Metro 1.3
0.125 in2 in & 1⅞ in large-bore units (H8, HD8, HS8, HIF7)1250 shankUses U-series needles (e.g. UM, UO, UN, UR) where the groove sets the piston flush datum rather than a shoulder; check ALT 9601 for full 0.125 in station charts.

SU Jet Needle Recommendations (1933–1957)

Official factory Rich / Standard / Weak needle pairings published by SU Carburetters (1933–1957 guide):

MakeYearModelRichStd.Weak
A.C.1933–3916 h.p. 6-cyl-L-
A.C.1946–5816 h.p. 6-cyl1DWD4
Alvis1933–3412 h.p. 4-cyl / 16 h.p. 6-cyl / 20 h.p. 6-cylKW / M1 / LS1KW1 / AC / 81SA / HA / 61
Alvis1936–3916 h.p. 6-cyl (37–39) / 20 h.p. 6-cyl (38–39) / 25 h.p. 6-cyl1 / R3 / 62CE / 2 / R32M6 / M5 / 1
Alvis1946–4814 h.p. 4-cylRLSCTCC
Alvis1951–563 Litre 6-cyl Sport- / LUA (51) / ES (52–56)-
Armstrong-Siddeley1933–35 / 1956–5830 h.p. 6-cyl / 2.5 Litre 4-cylWO2 / SQWO3 / SCC1 / TC
Aston Martin1951–582.5 L (1.5 in / 1¾ in) / 2.9 L (1¾ in) 6-cyl-GB / RJ / SV-
Austin1948–55A40 Sports / A90 AtlanticM7 / FOEK / FT- / FU
Austin-Healey1952–55100 / 100 Le MansQA / OA6QW / OA7AT / OA8
Austin-Healey1956–58100-6 / BN6 / Sprite4 / RD / EBAJ / CV / GGM1 / SQ / MOW
BMC1958Princess IVRDCVSQ
Daimler1937–3915–17 h.p. 6-cyl / 24 h.p. 6-cylL12 or DR / WO4BW or EG / RDS4 or 61 / KT
Daimler1952–57Conquest / Conquest Century / Regency 3.5 / DK400 4.5CN / SD / - / -5 / TC / SQ / UBAJ / TJ / - / -
Jaguar1936–3820 h.p. 6-cyl / 14 h.p. 4-cylR6 / 61RO / DSAM / 2
MG1934–39P/PB 8 h.p. / 10 h.p. (single) / 10 h.p. (twin)M5 / M1 / EMM6 / AC / ESS / S / AP
MG1946–55TC/TD twin carb / TD single / TF 1.25 / ZA MagnetteEM / DK / H1 / MES / F1 / GJ / GMAP / EF / GL / GO
MG1956–58MGA 1500 / MGA Twin CamCC / RHGS / OA64 / OA7
Morris1933–368 h.p. & 10 h.p. 4-cyl / Series 1 8 h.p.M7 / M5 / M6M9 / MA / BDMO / M6 / M7
Riley1935–581.5 Sport / 12 h.p. 4-cyl / 16 h.p. 4-cyl / 1.5 L (57–58)RO / BY / CY / ARCC / 3 / EE / AD5 / V2 / EM / HA
Rover1933–3910/12 h.p. (37–39) / 14 h.p. Speed Pilot / 16 & 20 h.p.S6 / H4 / ROCN / 1 / BP5 / M5 / BQ
Rover1949–5875 (49–54) / 75 & 90 (55–57) / 90 (56–58) / 105 (58)GE / - / - / -FV / SS / SZ / TMCR / SY / - / -
Singer1934–581.5 L 6-cyl triple / 9 h.p. twin / 9 h.p. (46–58)H4 / WZ / S51 / WX1 / AH2M5 / AK / QW
Standard1957–58Vanguard SportsmanSDTCTJ
Triumph1953–58TR2 (54–55) / TR3 (56–58)GE/R / RHFV / SMCR / SI
Triumph Motorcycle1952–58650 cc ThunderbirdSM9MO
Wolseley1949–584/44 / 4/50 / 6/80 / 1500 (57–58)VS / EE / CJ / HAFJ / EM / HB / EB1 / 1 / MO / GG

Related pages

Sources