Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning
Parent
Simos 8.5
Applies to
Simos 8.5
Tool groups
None
Manufacturers
None

This reference examines ignition-related labels in the publicly indexed S85L1031_C2_e.a2l definition. The file describes itself as an enriched Simos 8.5 TFSI project with structure L10 and EPK S85L100. Its origin, usage rights, completeness and match to a particular ECU or binary are unverified. Its names and axis references are research evidence, not a verified execution trace or values from a vehicle.

Basic and reference ignition labels

The definition includes ip_iga_bas_afl_cbk_sel[0][0] and ip_iga_bas_afl_cbk_sel[1][0], described as lean-burn basic ignition-angle maps for cylinder bank and valve-lift state. It separately describes ip_iga_bas_afr_cbk_sel[0][0] as a rich-burn basic ignition-angle map and ip_iga_ref_sel[0] as a reference ignition-angle map. These examples share the axis references ldpm_n_32_1_igsp and ldpm_maf_dly_cyl_stk_igsp. The first axis input references engine speed; the second is recorded in the definition as NO_INPUT_QUANTITY, so its exact runtime source is not established by that input field alone.

Distinct names and array indices show what the definition contains; they do not establish which bank, lift state or map is active on a particular vehicle. A basic or reference angle is not automatically final cylinder ignition timing. The file does not by itself prove the relationship among these maps, knock control, corrections and final output.

Lambda interpolation and operating modes

ip_fac_iga_bas is described in the same file as a factor for lambda interpolation for the basic ignition angle. Its inputs reference lamb_ratio, described as the current lambda ratio for the interpolation factor, and maf_dly_cyl_stk_1, described as delayed fresh-gas mass flow from the intake manifold per stroke. This is a labelled factor with two inputs, not a final timing value. The labels alone do not specify a proven interpolation formula, active range or effect of changing the map.

The definition also labels ip_iga_bas_cor_mplh_ch as a basic-ignition correction for multiple injection during catalyst heating, and ip_iga_ref_port_cor as a reference-angle correction for port-flap activation. They illustrate that operating conditions may matter when investigating ignition; they do not establish that either entry is selected in a given log or applies to every 3.0 TFSI. Check the actual operating mode and supported channel definitions before comparing warm-up and steady-state behaviour.

Knock-window and response labels

The same definition contains indexed ip_knkwb and ip_knkwd maps, described respectively as the beginning and duration of a measurement window for each cylinder. It separately labels id_knks_fil_frq entries as knock-filter frequencies per cylinder and ip_iga_dec_knk as spark retard at recognised knocking. The examined indexed entries and response map reference engine speed and maf_hb; the file describes the latter as a lower-resolution form of maf. Its maf measurement description calls it predicted air mass for basic fuel injection. These names do not establish a physical hot-film sensor, the active detection windows or the outcome of any test.

The definition also labels ip_iga_knk_lih as a knock limp-home spark-retard map and ip_iga_ad_1_dec_knk as a decreasing value of integrated knock correction when knock is detected. Detection windows, filtering, response and fallback are distinct labelled elements; the text alone does not prove their execution order or calibrated values. A lack of displayed retard is not proof that knock was absent or that every detection path worked. Compare all supported cylinder corrections and operating conditions, investigate sensor and fuel issues, and do not change detection or fallback parameters merely to make a log look cleaner.

Reviewing a calibration or log

Identify the ECU, exact software, fuel and hardware and establish a healthy baseline. Where the connected ECU and logger provide correctly defined channels, compare engine speed and load with lambda target and actual, per-cylinder ignition timing and knock correction, temperature, flap or lift state and any relevant operating-mode indication. Sample timing and channel meaning matter: an isolated timing change is not proof that a particular map was selected or that a single component failed.

Match a definition to the actual binary and independently validate axes, scaling, boundaries and conditions. The A2L metadata alone does not supply a vehicle's actual map values, prove the file’s factory origin, establish a safe ignition change or establish runtime selection. Do not transfer these names or values to a different Simos revision without verification.

See Simos 8.5 L10 torque limit definition reference, L10 supercharger air-model reference and Simos 8 fuel pressure and lambda log review for related but separately scoped contexts.

Source and verification scope

Publicly indexed S85L1031_C2_e.a2l: characteristic descriptions, axis references and measurement descriptions reviewed 17 November 2026. SHA-256 of the inspected file: 2ed20a98b9b55d41347a6b125304aa28c52d2cd955a5e760ee049503a5c88f4b. The hash identifies the inspected text; it does not verify authenticity, rights, vehicle fit or behaviour.