Simos 10 is a Continental petrol engine-management family used on Volkswagen Group vehicles. Volkswagen's Self-Study Programme 443 identifies Simos 10 on the turbocharged 1.2 TSI CBZB. Programming and logging suppliers list further applications and suffixes, but their catalogues are tool-coverage statements, not complete fitment records. Identify the ECU and its exact software before choosing a definition or procedure.
Documented application and identification
VW Self-Study Programme 443 describes the CBZB, a 1,197 cm³ four-cylinder petrol engine with two valves per cylinder, direct injection and a turbocharger. The documented version is rated at 77 kW and uses Continental Simos 10; the programme does not specify a Simos 10 suffix. Audi SSP 485 also identifies Simos 10 for its CBZA A1 and CBZB A3 examples, without specifying a suffix. See also the wiki's EA111 four-cylinder engine reference.
A 2021 Alientech driver announcement lists Simos 10 coverage for selected 1.2 TSI/TFSI vehicles from Audi, SEAT, Škoda and Volkswagen. Separately, Microtronik's Simos 10.12 listing gives Volkswagen examples for its product. These listings do not establish the ECU in every vehicle with the same badge or engine size.
Some programming catalogues disagree about applications, including a separate 2.0 TFSI listing. The CBZB example is supported by VW's own documentation; that does not resolve every conflicting catalogue entry. Check the controller label and diagnostic identification, including hardware, software and calibration identifiers, rather than assigning a suffix from the model or engine code alone. The Alientech DataLogger listing names several separate Simos 10 suffixes for logging; it is not a flashing or fitment guarantee.
Air, boost and fuel on the CBZB
On the engine described in SSP 443, an electrically operated charge-pressure actuator V465 moves the turbocharger wastegate, with position feedback from G581. The ECU derives a required charge-pressure target from the torque request, and adjusts the wastegate when actual and requested pressure differ. This is not the same control arrangement as the pneumatic N75-based system described for the earlier comparison engine. These statements are specific to the CBZB system in the programme, not a claim about every Simos 10 installation.
The documented system uses charge-pressure and intake-manifold pressure sensors with temperature measurements, plus ambient pressure. VW describes the manifold pressure and temperature signals as inputs to calculating air mass downstream of the charge-air cooler. Charge-air cooling is liquid-cooled, with a separate cooling circuit. High intake temperature can cause charge pressure to be reduced for component protection. See SSP 443, air supply and engine management.
SSP 443 also describes direct injection with two injection events during catalyst heating and under specified operating conditions up to 3,000 rpm. These are normal operating strategies on that example, not evidence that injection settings can be transferred unchanged to another ECU or calibration.
For the documented split-injection events, pressure-system context and log review, see Simos 10 CBZB fuel pressure and split injection log review.
See Simos 10 1.2 TSI charge pressure and wastegate diagnosis for the documented sensor locations, actuator feedback, logging and replacement-turbo considerations.
For the separate charge-cooling circuit, V50 pump, G299 and G42 temperature signals, see Simos 10 1.2 TSI charge-air cooling and temperature logs.
Calibration and diagnosis
Start with a healthy baseline: read fault codes and investigate intake leaks, cooling-system or charge-cooling problems, fuel delivery, ignition faults and wastegate actuator or position-feedback issues before changing a calibration. A torque or boost request is a target; compare it with the reported result and investigate the active cause of a mismatch rather than assuming a particular limiter is responsible.
Where supported by the identified ECU and logger, compare requested and actual charge pressure, wastegate command and position, throttle, lambda target and actual, fuel-pressure target and actual, ignition timing and knock correction, temperatures and torque or load intervention. Confirm whether pressure is absolute or relative, whether a value is measured or calculated, and the channel's units and sampling rate. Check map axes, scaling and function against a definition for the exact software; Simos 18 addresses and control assumptions must not be copied across.
The rehosted Dimsport Simos 10.x tuning example lists abbreviated map groups and numerical changes for selected 1.2 TSI applications. It is a third-party upload, and the examples have not been validated here against a specific ECU software and hardware setup. Treat the abbreviations and suggested increases as leads for investigation, not as identified maps or universal safe settings. The Alientech driver announcement discusses Simos 10 and 18 together, so its shared list of map features does not by itself establish that each feature exists on every Simos 10 file.
Example: interpreting a published CBZ tune
In a 2015 APR release for the 1.2 TSI/TFSI CBZ, an APR representative describes a Simos 10.x Stage I calibration with fuel-specific versions and changes to load, boost, ignition and lambda. APR described its available product as OBD-programmed and intended for the stated stock-hardware application. These are historical vendor and product-specific claims; they do not identify map addresses, establish the ECU suffix or guarantee coverage of a particular revision. The product note says to check part number and revision, and its output figures are not independently verified here.
APR's report illustrates how a claimed gain differs from the difference between peak values. For its 98 RON example it lists a stock peak of 115 hp and tuned peak of 133 hp, while its maximum reported gain is 26 hp at 3,700 rpm. The 26 hp is the difference at that speed, not the difference between the two peak numbers. APR says its figures came from repeated tests on an Australian 105 hp Polo DSG using a Dynapack and SAE J1349 correction; the published crank figures are estimates derived from wheel figures. Compare curves at the same rpm, fuel, conditions, correction and measurement point rather than treating the advertised gain as a universal target. Confirm current product and ECU support with APR. APR release and calibration report.
Examples of definition coverage
A TuningFile Polo 1.2 TSI listing groups several CBZC firmware entries under Simos 10 and advertises tuning items for boost pressure, load, torque limits, ignition and air mass. The entries include 03F906070GD 5466 and 03F906070GD 0390: the same number appears with different updates, illustrating why the complete identifier matters. The seller's headings describe available operations across its listing; they do not prove that each named map exists at the same address, has the same axes or performs the same function in every listed file. The listing's heading combines Simos 10/11, while its ECU entries identify Simos 10; confirm the fitted controller rather than assigning a family from the heading.
For a different identified file, ECUHARD's 03F906070GH 3607 listing claims an ECM Titanium driver match for its stated Simos 10 file. That is the provider's compatibility claim, not independent verification of the definition or a recommendation to use an automated modification. Confirm the complete file identity, definition, axes and tool operation before relying on it; the listing itself distinguishes its software-area file from EEPROM and other sectors.
A further file-specific comparison illustrates why the update number matters. Auto-Remap lists a SEAT Ibiza 1.2, 03F906070GR 5485, as Simos 10.22 with 72 advertised map labels. Its separate 03F906070GR 2691 Ibiza listing has 21. The former seller's labels include torque limits, shift and clutch-related torque, turbo-pressure limits, wastegate duty, requested lambda and fuel rail pressure; the latter has a smaller published list. These counts describe the seller's exports, not proven differences in the ECU strategies. The public pages now display one illustrative table each, while the rest of each list gives names without disclosing every size, axis or position. A matching calibration number is a starting point, not verification of a definition or permission to transfer addresses or settings between revisions.
An ECUedit community thread independently identifies a partial WinOLS map pack by the same 5485 identifier and describes a 2014 Ibiza with a five-speed gearbox. The attachments require forum access and have not been examined here. The seller's list also contains labels for sixth- and seventh-gear requests, so those labels alone do not establish the donor gearbox or prove which tables are active. Both resources are research leads, not factory definitions or validated tuning instructions. The seller describes its map pack as a CSV rather than a factory DAMOS/A2L and says its original file excludes EEPROM and a full backup.
The 5485 public example labels one 12-by-16 table as requested engine load, with torque in Nm across its columns, engine speed in rpm down its rows and values in mg/st. For illustration, the displayed cell at 3,104 rpm and 160 Nm is 444.3 mg/st. The seller’s label, scaling, active conditions and file content have not been independently verified; this cell is not measured air mass or a tuning target.
The separate 2691 listing shows a pedal-position versus engine-speed table labelled torque request, with an unexplained pair of rows both displayed as 1,200 rpm but containing different values. The listing does not establish whether its axis is rounded or misidentified, the percentage output’s reference, or which table the ECU selects. Verify the underlying file, axis scaling and applicable mode before interpreting or editing either example; the web display is not a validated definition.
Public definition research lead
A public directory labelled Simos 10.22A / Ibiza lists a WinOLS .kp file with the project label 772777 beside a file named org. The index does not identify the ECU part number, actual software, maps or provenance of either file. The names and co-location do not establish that the two files match, that either is original, or that a definition is suitable for a particular ECU. Usage rights and licensing are not stated.
The same 772777 label appears in a separate directory labelled Simos 10.12. A comparison of the two publicly served .kp files on 17 November 2026 found different SHA-256 hashes; the shared label is therefore not proof of identical file contents or interchangeability. This comparison does not identify their maps or validate either file. Treat the directories as research leads, independently verify the actual ECU and file, definition, provenance and permissions, and do not use an unidentified file as a calibration or recovery image.
A separate public directory labels a 6.8 MB WinOLS .ols project as a Polo 1.2 TSI, Simos 10.1.0 and V2A360ZWS74. A separate commercial catalogue also lists that string for a CBZB example and calls its product a map pack. These are catalogue and directory labels; their agreement does not establish that the files are the same, that the project contains a factory DAMOS, or that either matches a specific ECU. The public index does not identify file provenance, rights, calibration revision, map data or recovery coverage. Verify the complete ECU identity, file contents, source and permissions before using any definition or project.
Reading, writing and recovery
Diagnostic logging, a virtual read, a physical read, calibration editing and writing are different capabilities. Microtronik describes particular OBD operations in its own Simos 10.12 product listing; that does not prove another suffix or tool has the same coverage. Match the supplier's current protocol to the exact ECU and software, confirm checksum handling, supply and recovery arrangements, and keep the original read in the format the selected tool can restore.
Sources
- Volkswagen Self-Study Programme 443: 1.2-litre 77 kW TSI engine with turbocharger, French edition. CBZB, Simos 10, air and charge control, injection and sensors; does not identify the ECU suffix. Accessed 17 November 2026.
- Audi Self-Study Programme 485: 1.2-litre TFSI engine, English edition. CBZA and CBZB applications, sensors and engine management. Accessed 17 November 2026.
- Alientech ECM Titanium drivers update: Simos 10 and 18, 2021, reproduced by Tuning-shop. Vehicle coverage and shared driver feature descriptions. Accessed 17 November 2026.
- Alientech VAG DataLogger protocol listing and Microtronik Simos 10.12 product coverage. Product-specific statements. Accessed 17 November 2026.
- Simos 10.x tuning example attributed to Dimsport, third-party Scribd upload. Illustrative map-group suggestions; numerical recommendations are not independently validated here. Accessed 17 November 2026.
- TuningFile Polo 1.2 TSI listing and ECUHARD 03F906070GH 3607 listing. Provider-specific identifiers, tuning categories and definition claims. Accessed 17 November 2026.